Question about 1995 Jeep Grand Cherokee

2 Answers

95 Jeep Grand Cherokee ''overdrive'' light

Can't seem 2 get the overdrive light 2 go out! Will not release from the overdrive function! Very low acceleration and high RPM's on the highway.

Posted by on

  • theesirnubia Jul 17, 2009

    Meaning, when I start, the OD light comes on, and SHOULD shut off, after a few seconds.......it does not! So......I am stuck, driving in OD!

  • yadayada
    yadayada May 11, 2010

    u mean u have no OD?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Omg you people should not be giving advise . the problem is common its a throttle position sensor or a manifold tempature sending unit or combo of both they are what work hand in hand to shift trans

Posted on Aug 26, 2012

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 218 Answers

I would recommend taking this to transmission shop or the dealer, sounds like there is an internal problem with the transmission.

Posted on Jul 18, 2009

  • kruzer73 Nov 28, 2010

    i have the same problem. Took to a transmission shop, he hooked the computer up for free and said they need to make sure it's not a wiring issue, otherwise it was something to do with a governor. bite the bullet take it to a shop.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 jeep grand cherokee is stuck in second gear, the overdrive button is not functioning, and getting the data control center says service 4wd switch


wow no engine size stated, the 5.2L run a special trans... so....
hopeless to help you much.
zj jeep with automatic.
it didnt lie, it told you to service it, so take it to a shop and let the work on this old dog..
stuck , now what does that mean.
the shift lever lever stuck, or its cable failing end to end.? or?
or shifts from 1 to 2 and hangs there.
or down shifts from 3 to 2 and and hangs there
DIY ? question is that it? you never said intentions.....
so we open the 93 ZJ book and what do we see.
ax-15 stick box, seems not.
the aw-4 auto , electronically shifted with TSM (scan it yet?)
and the 46RH auto. used on the 5.2L, has no TCM brain.
its a Hydramatic.
here are the OD words off the 46h page

Overdrive Control Switch
The overdrive control switch is located in the instrument
panel. In the On position, automatic shifts
into fourth gear overdrive will occur. In the Off position,
the switch overrides the powertrain control module
preventing a shift to overdrive fourth gear range.
The switch has an indicator light that illuminates
when overdrive is turned off. The switch also resets
when the ignition key is turned to the OFF position
so that the automatic overdrive feature is restored.
The use of fault codes is employed to help diagnose
the electronic components that operate the overdrive
unit and torque converter clutch.

Jul 16, 2016 | 1993 Jeep Grand Cherokee

1 Answer

2002 Jeep Grand Cherokee Limited P0846 code



Trouble Code: P0846

A/T 2/4 Pressure Switch Circuit Malfunction
Possible Causes:


2/4 pressure is incorrect, or internal transmission faults exist 2/4 pressure switch circuit is open, shorted to ground or power 2/4 pressure switch is damaged or it has failed TCM relay power circuit to L/R switch is open (loss of B+) PCM/TCM has failed

May 16, 2012 | 2000 Jeep Grand Cherokee

1 Answer

Jeep grand cherokee head lamps


Two items to check. headlight relays and body control module. Also make sure firewall and dash grounding is good. Might also be a multi-function switch internal problem (part of directional switch) You need to test or without fail, you'll change everything and the last part changed will be the one with the problem.
Get a decent manual and a test light or better, volt meter.

Dec 01, 2011 | 1998 Jeep Grand Cherokee

1 Answer

I don't think my 95 Grand Cherokee is shifting into overdrive all the time. Can you tell me what the RPMs should be for it running 65 MPH?


Depending on differential gearing, most run at about 21 hundred rpms @65. Overdrive usually shifts in at around 45mph. To see if it is engaged, while doing about 50, lightly tap the brake. That should momentarily disengage the od and the rpm's should increase for a moment. @45, you should notice the rpm drop when it engages initially.

Apr 14, 2011 | 1995 Jeep Grand Cherokee

1 Answer

What is O/D button on Jeep Grand Cherokee Limited for?


the Overdrive button puts it into a mode for towing.

If you are towing something press the button to turn off the overdrive function, for better pulling torque.

Jul 21, 2010 | 2000 Jeep Grand Cherokee

1 Answer

95 jeep grand cherokee 4wd heater problem


it cud be a vaume hous or the flap door is not working or the watre valve is not functioning

Dec 10, 2009 | 1995 Jeep Grand Cherokee

2 Answers

Is the overdrive solenoid on a 95 JGC accessible, externally?


no. its part of the valve body inside of the transmission. you would need to drain and remove the transmission oil pan and then remove the valve body. Best left to a transmission shop or reputable repair center.

Aug 10, 2009 | 1995 Jeep Grand Cherokee

2 Answers

94 jeep grand cherokee will not shift into overdrive


My 97 Jeep Grand Cherokee was doing the same thing. I changed the TPS ( Throttle Position Sensor) Now it is great goes into overdrive fine. It is really easy to change.

Jan 27, 2009 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

1,296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...