Question about 2000 Chevrolet Monte Carlo

1 Answer

Add refrigerant service air conditioning

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 76,691 Answers

Is the system empty? the common leak on this engine is the AC compressor front shaft seal, the charging port is about center of the firewall on the larger of the two AC lines, the system holds 1.88 (21/4 12 ounce cans) pounds of R134

Posted on Jul 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air condition system filter


How to Auto Air Conditioning Repair DVD - AutoZone

www.autozone.com/landing/page.jsp?...auto-air-conditioning...
AutoZoneWhile signs of a malfunctioning air conditioning system - like leaks or a system that has ... Add A New Vehicle or select Manange My Vehicles to shop for the part that applies to your car, truck or SUV. ... A filter of sorts, this A/C component regulates the flow of refrigerant through your air ... Vehicle: 2008 Ford F150, 98 Civic.

Nov 06, 2015 | Mitsubishi Cars & Trucks

1 Answer

Where do I add freon on a 1998 mercedez Benz


Nowhere...its called r-134a and you have to be a qualified technician to even deal with the stuff. There are air conditioning recharge kits you can buy...I assume this is what you have. Look for a valve on your air conditioning line that looks like a tire valve(shraeder valve) This is where you can add refrigerant...

Apr 05, 2014 | Cars & Trucks

1 Answer

I want to add refrigerant to my 2002 Lincoln Town Car.


My 2002 town car has good cold air, but I hear clacking sound when I stop and sit. When I drive off again it will quit just a few feet down the road. Sounds like coming from AC. Whats up?

Jun 16, 2012 | 2002 Lincoln Town Car

1 Answer

Air conditioning isn't as cold


You will need to have the AC pressures read to see if the charge is low. DO NOT just add refrigerant unless the pressure's indicate it is the problem, you can destroy the AC compressor very quickly. (1st hand knowledge)

Jun 16, 2012 | 2006 Hyundai Elantra

2 Answers

Hi have an 04 hyundai tiburon i dont know where to locate where to put freon for my aid condtioner


STEPS TO CHARGING YOUR CARS COOLING SYSTEM:

STEP 1) Look under the hood of you car on the left side of your cars engine. There should be two stainless steel lines coming from a stainless steel cylinder to your cars compressor. The two lines have plastic dust caps on them sometimes they are blue or black. Usally the black has the larger diameter tubing that runs between the evaporator and the compressor. This will be the port that you hook the refrigerant hose up to.

STEP 2) Start your cars engine after you have secured the hose hook up to the air conditioner line port. Once the cars engine is running, turn your cars AC on to Max cool. Shake the can of coolant well. The gauge on the can of coolant should read in the blue but if it is in the green your air conditioners pressure will be between 0-25 pounds per square inch. This means you will have to add refrigerant to the compressor.

If your cars air conditioner pressure is in the blue. The system has the proper amount of refrigerant and you do not need to add. If the gauge reads in the yellow you may want to seek professional help because refrigerant is not what is wrong with the unit and is probably something more technical and most likely something that you do not want to attempt to do on your own. The red on the gauge means do not add any refrigerant at all and to seek professional help.

STEP 3) If the pressure of your air conditioning system is in the green it means it is safe to add the refrigerant. You should wait for your air conditioning compressor to switch on before squeezing the trigger to add the coolant. When the compressor switches off then release the trigger and repeat until your pressure gauge on the coolant can says that the coolant is in the proper range. If the needle on the gauge is in the top part of the blue you have successfully charged your cars air conditioning unit.

STEP 4) Release the attachment from the tubing port and replace the dust cap back in it's proper place and you are done. The cars air should be cool and your compressor should cut off and on less often. If problems persist you should consult a mechanic or someone that has experience with air conditioning systems.

Jun 26, 2011 | 2003 Hyundai Tiburon

4 Answers

I turned on my air conditioning today for the first time since last fall... it was not blowing cold air. It was working fine the last time i used it 3 months ago. Could it be a fuse problem?.. or maybe...


While the engine is running as you turn on the A/C , the compressor will latch on now as you will find the engine faulting in RPM as it comes on. Now if this is so the compressor, the solenoid clutch is good and the fault can be only loss of gas in the system. If not the compressor pumping pressure needs a check. Also if gas has leaked the system needs a test for leaks.

Feb 25, 2011 | 1999 Mercury Sable

1 Answer

Where is the freon tank


There isn't a tank, and it's not "freon". The refrigerant in your air conditioning system is either R-12 or R-134a, most likely. It's a compressed system that is in constant flow when the pump is operating, so if you need to add or charge refrigerant, you do it through the low-pressure port on the air conditioning lines. The recharge kit will only work on one of the fittings, so short of not using the kit properly, you can't mess it up.

Jun 27, 2010 | 1989 Mitsubishi Mirage

1 Answer

How do you recharge the air conditioning system for a 97 cadillac


Just get an R134a recharge kit, and follow the instructions.

The kit contains canisters of oil and R134a and a hose with a gauge on it.

Add about 2 or 3 cans of refrigerant on a system where the refrigerant leaked out.

One may also want to add leak sealer. which comes in a can like the pure 134a.

Apr 03, 2010 | 1997 Cadillac DeVille

2 Answers

Need instruction on installing heater core for 2000 jeep cherokee




The heater-A/C housing assembly must be removed from the vehicle and the two halves of the housing separated for service access of the heater core, evaporator coil, blend-air door, and each of the various mode control doors.

WARNING: On vehicles equipped with airbags, refer to Airbag Systems Safety Information and Procedures. Before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury. See: Restraint Systems\Air Bag Systems\Service Precautions

REMOVAL
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel from the vehicle. Refer to: Body and Frame, Interior Trim, Dashboard / Instrument Panel, Service and Repair, Instrument Panel Service Procedures, Instrument Panel Assembly Replacement, See: Body and Frame\Interior Moulding / Trim\Dashboard / Instrument Panel\Service and Repair\Instrument Panel Assembly
  3. If the vehicle is not equipped with air conditioning, go to Step 6. If the vehicle is equipped with air conditioning, recover the refrigerant from the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Procedures, Refrigerant System Recovery, See: Service and Repair\Refrigerant System Recovery
  4. Disconnect the liquid line refrigerant line fitting from the evaporator inlet tube.
    • Install plugs in, or tape over all of the opened refrigerant line fittings.
  1. Disconnect the accumulator inlet tube refrigerant line fitting from the evaporator outlet tube. See Refrigerant Line Coupler for the procedures.
    • Install plugs in, or tape over all of the opened refrigerant line fittings.
  1. Drain the engine cooling system.
  2. Disconnect the heater hoses from the heater core tubes. Install plugs in, or tape over the opened heater core tubes.
  3. Unplug the heater-A/C system vacuum supply line connector from the tee fitting near the heater core tubes.
  4. Unplug the heater-A/C unit wire harness connector, which is fastened to the heater-A/C housing next to the blower motor relay.
    1. Remove the five nuts from the heater-A/C housing mounting studs on the engine compartment side of the dash panel. Remove or reposition the evaporation canister for additional access, if required.
    2. Pull the heater-A/C housing rearward far enough for the mounting studs and the evaporator condensate drain tube to clear the dash panel holes.
    3. Remove the heater-A/C housing from the vehicle.
    INSTALLATION
    1. Position the heater-A/C housing to the dash panel. Be certain that the evaporator condensate drain tube and the housing mounting studs are inserted into their correct mounting holes.
    2. Install and tighten the five nuts onto the heater-A/C housing mounting studs on the engine compartment side of the dash panel. Tighten the nuts to 6.2 Nm (55 in. lbs.) .
    3. If the evaporation canister was repositioned during the removal procedure, reinstall it to its proper position.
    4. Connect the Heater-A/C system vacuum supply line connector to the tee fitting near the heater core tubes.
    5. Unplug or remove the tape from the heater core tubes. Connect the heater hoses to the heater core tubes and fill the engine cooling system.
    6. If the vehicle is not equipped with air conditioning, go to Step 10. If the vehicle is equipped with air conditioning, unplug or remove the tape from the accumulator inlet tube and the evaporator outlet tube fittings. Connect the accumulator inlet tube coupler to the evaporator outlet tube.
    7. Unplug or remove the tape from the liquid line and the evaporator inlet tube fittings. Connect the liquid line coupler to the evaporator inlet tube.
    8. Evacuate the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Procedures, Refrigerant System Evacuate, See: Service and Repair\Refrigerant System Evacuate
    9. Charge the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Procedures, Refrigerant System Charge, See: Service and Repair\Refrigerant System Charge
    10. Install the instrument panel in the vehicle. Refer to: Body and Frame, Interior Trim, Dashboard / Instrument Panel, Service and Repair, Instrument Panel Service Procedures, Instrument Panel Assembly Replacement, See: Body and Frame\Interior Moulding / Trim\Dashboard / Instrument Panel\Service and Repair\Instrument Panel Assembly
    11. Connect the battery negative cable.
    12. Start the engine and check for proper operation of the heating and air conditioning systems.
REMOVAL AND INSTALLATION

WARNING: On vehicles equipped with airbags, refer to Airbag Systems Safety Information and Procedures. Before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury. See: Restraint Systems\Air Bag Systems\Service Precautions

  1. Remove and disassemble the heater-A/C housing. Refer to: Heating and Air Conditioning, Housing Assembly HVAC, Service and Repair, See: Heating and Air Conditioning\Housing Assembly HVAC\Service and Repair
  2. Lift the heater core out of the lower half of the heater-A/C housing.
  3. Reverse the removal procedures to install. Be certain that the heater core foam insulator is reinstalled

Jan 18, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Chevrolet Monte Carlo Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...