Question about 2000 Toyota Camry

3 Answers

Drivers side rear door will not lock. or unlock, with FOB or main lock control on drivers side front door. I have to loc and unlock this door manually

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 53 Answers

THE DOOR LOCK ACTUATOR IS BAD THIS WHAT CONTROLS THE LOCK ELECTRONICALLY. WHAT IT IS THAT GET HOT AND THE CONTROL GETS HOT SO MANY TIMES BURNS UP CONTRFOL CONTACT. THE ONLY FIX IS TO REPLACE THE ACTUATOR.

Posted on Jul 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Wire ma be diconnected or loose
remove door trim to check connections & drive motor

Posted on Jul 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 521 Answers

Door lock actuator/motor has lost power source or has burned out. You will have to remove the interior door panel for access to the wires/motor or even to just rerplace the actuator itself.

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bmw drivers door only wont lock/unlock with key fob


Could be your driver door lock mechanism that is going bad , since the other door are working, it cannot be the fob. I would try to change the driver side door latch mechanism.

Apr 02, 2014 | 2008 BMW 320i Automatic

2 Answers

LDV Maxus 3.5 Drivers door lock initially wouldn't unlock with fob, will work with key. Now will not lock or unlock on fob. Back door will unlock with fob, but does not lock, it has to be locked


The problem is not the actuators, the fault lies in the central locking control unit under the dashboard, behind the glovebox, on the firewall. The CLCU is mounted with the connection terminals to the top resulting in condensation going onto the printed circuit board inside, if the damage started a while ago there is only 3 ways to go.

1. specialist firm to repair the CLCU.
2. Replace.
3. (As I did) buy a cheap remote control receiver with keyfob/s. Cut all wires off the multiplug, there are four pairs, a permanent live and permanent earth. Test each wire to earth on the van to identify the permanent earth FIRST. Then test pairs of wires across 12v/Earth noting which pairs actuate which lock.Isolate in pairs noting which wire has to be live to lock, (Reversed it will unlock) wire each pair into the relay on the remote receiver using the relay to changeover the polarity to each pair You will then be able to Lock/Unlock all the doors, throw the old CLCU away and mount the RCReceiver eslewhere to keep it dry. each door individually. I bought a 2 way RCReceiver and can lock/Unlock front doors seperate the the rear ones which is of far more use! Any decent electrician will tell you how to wire the relays. Job Done..... (100% Sure)

603d3609-f326-41be-a38e-a00bb8d6bdab.jpg

Feb 02, 2013 | Cars & Trucks

1 Answer

Passenger door will not lock or unlock with key fob?


Passenger door lock is electronically controlled by the door lock actuator. You will need to replace the door lock actuator.

Jul 08, 2012 | 2003 Mini Cooper

1 Answer

1998 Jeep Grand Cherokee Laredo TSI, Passenger side windows do not work from master switch on drivers door. Both driver side windows work from master switch on drivers side. Passenger side windows do work...


It has to be the switch or the wiring, right? So pull out the switch and probe the back with a volt meter to see if power is coming out of the switch. If yes, trace the wires to the doors.
0900c152800aa140-zzyiglue2iivran2oy1paayi-3-0.gif

Jun 30, 2017 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Front passanger door not opening on central locking


My 1998 passat done the same, try remove the drivers side window/childlock control on the armrest and clean the multipoint switch as that got my drivers side door opening/closing on the fob as well as the passenger rear door unlocking and working again as it was deadbolted and would not open inside or out.

Jan 19, 2010 | 2006 Volkswagen Passat

1 Answer

My 2003 Honda CRV ...drivers side door does not lock with fob. All other doors lock. When I lock the drivers side door with the key, it won't unlock with the fob.


you may need to replace the door locking actuator, they do tend to go bad over times. does the driver side door lock automatic when using the lock button on the driver side. if you can lock and unlock the driver side door with a switch, my guess would not be the locking actuator, it might be in the remote locking module.

Sep 30, 2009 | 2003 Honda Civic

1 Answer

Power door locks won't unlock + tailgate won't open


your issue involves the master control switch panel on the drivers side and or the passenger side as well some how the contact inside the switch assembly has either shorted out or no longer makes contact for the unlock side of the circuit. replace the drivers side panel switchs it's either a series of switc hs or mostimes one sigle board of switchs. you are better off going to an auto parts store rather than a GM dealership this will save you quite a bit on cash on the parts. now as to the rear tailgate. if it is electronic controled and there is an issue with the master switch you can,t manually unlock it because of a safty issue built in the system. you can manually unlock the passenger compartment doors for thew same reasons of safety but doesn't apply to the tailgate. just replace the parts and this will take care of the problem

Apr 18, 2009 | 2004 Chevrolet Suburban

1 Answer

Drivers side rear door lock inoperative


You need to replace the electric solenoid/actuator for the door lock. The door panel pulls off very easily.

Oct 11, 2008 | 2004 Toyota Sequoia

Not finding what you are looking for?
2000 Toyota Camry Logo

574 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...