Question about Toyota Cars & Trucks

2 Answers

Aligning timing belt after breakage on 1996 toyota camry 2.2 liter 4 cylinder

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 24 Answers

If you've ever tuned the car by marking the timing marks on the crankcase & small marking area, just align the timing marks to suggested setting (10 degrees below top dead center?--check your manual or find online) ... you can also find TDC on cylinder #1 with a cylinder pressure gauge on #1 by finding highest pressure point, but timing marks are easier. If you aren't familiar with timing marks, ask at a local auto store like AutoZone or advance shop.

Posted on May 15, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 11,573 Answers

Dustin, The attached links will explain timing alignment on 2.2 Camry engine. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Diagram of Timing Belt Marks and Installation
work on camry engine
Aligning timing belt after breakage on 1996 toyota camry 2 2 liter 4...
DIY GEN3 Timing Belt Waterpump Oil Seal Change Part 1 Toyota Nation Forum...

Posted on May 15, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 84 Answers

SOURCE: timing belt 2005 4 cylinder camry

Hello, A 2005 Camry with a 2.4 4 cylinder engine has a timing CHAIN not belt. I don't think that there is a routine maintenance schedule for this. If there is no audible noise coming from the chain area, you probably have nothing to worry about.
I hope this helps
CYA, Gator241

Posted on Feb 09, 2009

bluelightnin
  • 35 Answers

SOURCE: Setting the timing on my 1996 Toyota Camry 2.2 liter.

Timing marks are below, let me know if you need further assistance.

ca06b00.gif b14d4ca.gif fbbd8a5.gif

Posted on May 23, 2009

emissionwiz
  • 85114 Answers

SOURCE: Does a 1998 4 cylinder Camry have a timing belt or chain...

it has a belt, it's supposed to be replaced every 90,000 miles

Posted on Jun 23, 2009

  • 36 Answers

SOURCE: firing order for toyota camry v6 1996

the firing order is in fact 1 2 3 4 5 6 the number one cylynder is on the left at the back, as you look at the engine from the front >>
positions of cylinders
-------------
1 3 5

2 4 6
------------

Posted on Mar 15, 2010

dttech
  • 4803 Answers

SOURCE: i have installed a new

There is only 1 "set" of timing marks. If there is more than 1 then someone has modified your engine components. Here is a picture of where they should be.

dttech_46.gif

Posted on Apr 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

How do i check the timing marks on A TOYOTA CAMRY 2 LITER 4 CYLINDER 1995 model car ?


I have attached to where you align the notch for the cam gear. The harmonic balancer has a notch on it, which you align to the "0" on the lower cover. The belt has alignment marks on them normally crank gear is the dotted line and the cam will be the solid line. Don't reuse an old timing belt of you removed it without marking it first. You should have aligned the gears to there timing spots prior to removing the belt Be very careful if you have to rotate the cam or crank the Pistons can touch the valves and cause damage. Hope this helps.
1_29_2016_12_10_45_pm.png

Jan 29, 2016 | 1995 Toyota Camry

1 Answer

Camry timing belt


I am assuming you are referring to a 2.2 liter 5SFE engine. If so camshaft timing mark is dot located on forward face of sprocket mid spoke/or a notch on inboard rim of sprocket. locate mark and paint with white paint. Locate timing mark-small raised dot on plate behind sprocket at approx. one o-clock position paint this white for easy reference. Crank shaft sprocket has small notch on inboard rim. paint white for reference. align cam timing marks, then align crankshaft mark with #0 on timing scale. Adjust tensioner and belt is aligned. I recommend changing idler pulleys and water pump when replacing belt as preventative maintenance. Also inspect shaft oil seals and replace as needed. Performing these services now will save time and money in the future.

May 09, 2014 | 2001 Toyota Camry

1 Answer

Whats the part number for a 95 camry timing belt is it 94167 (163stp8m267) thanks for ya assitance


3.0 Liter V6 engine use Dayco 95257
2.2 Liter 4 cyc engine use Dayco 95199

======== 94167 is an old Deyco Euro part #
It will fit the following
Toyota Camry 2.0 i 1996 3S-FE Petrol 10/86-06/91


Toyota Camry 2.0 i 16V 1998 3S-FE Petrol 10/86-06/91


Toyota Camry 2.2 i 16V 2164 5S-FE Petrol 06/91-07/01


Toyota Carina E 2.0 i 16V 1998 3S-FE Petrol 02/92-10/97


Toyota Carina E 2.0 i 16V 1998 3S-FE Petrol 02/92-10/97


Jul 31, 2011 | Toyota Camry Cars & Trucks

1 Answer

Please how many liters for toyota ? Thank you


The 2003 Toyota Camry came with 2 different engines. If you have the 4 cylinder it's a 2.4 liter MFI DOHC. If you have the 6 cylinder it's a 3.0 liter SFI DOHC. I hope this helps you and good luck.

Mar 24, 2011 | 2003 Toyota Camry

1 Answer

Does the '94 camry wagon have a timing belt or chain? It's a 4 cylinder.


1994 2.2 liter 4 cylinder is a timing belt, it should be changed every 90,000 miles under moderate driving conditions, under severe driving conditions (stop and go traffic, etc.) it should be changed every 60,000 miles

Jul 07, 2010 | 1994 Toyota Camry

2 Answers

Looking for timing mark's for a 1997 camry with a 2.2 4cyl motor?


Hi,


You find the timing marks on the picture below.

moz-screenshot-2.pngaab8238.jpg



Removal
Remove auxiliary 1. drive belts.
2. Support engine.
Remove:
Engine mounting and bracket.
Timing belt upper cover [1].
3.
4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].
Remove:
Crankshaft pulley bolt [4].
Crankshaft pulley [5]. Use tool No.09213-60017.
5.
6. Ensure timing marks aligned [2] & [3].
7. Slacken tensioner bolt [6]. Move tensioner away from belt and lightly tighten bolt.
Remove:
Timing belt lower cover [7].
Crankshaft sprocket guide washer [9].
Timing belt.
Tensioner pulley.

Installation
Installation
1. Check tensioner pulley for smooth operation.
2. Check free length of tensioner spring is 46,0 mm [8]. Replace spring if necessary.
3. Fit tensioner and spring. Ensure spring is connected correctly.
4. tighten bolt [6].
5. Ensure timing marks aligned [2] & [3].
6. Fit timing belt. Ensure belt is taut between sprockets.
Install:
Crankshaft sprocket guide washer [9].
Timing belt lower cover [7].
Crankshaft pulley [5].
7.
8. Slacken tensioner bolt 1/2 turn [6].
9. Turn crankshaft two turns clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].
Turn crankshaft slowly 1 7/8 turns clockwise until crankshaft pulley timing mark [3] aligned with 45° BTDC mark [10] on
timing belt lower cover [7].
10.
11. Tighten tensioner bolt [6]. Tightening torque: 42 Nm.
12. Install components in reverse order of removal.
13. Tighten crankshaft pulley bolt [4]. Tightening torque: 108 Nm.
Manufacturer: Toyota

Jun 25, 2010 | 1997 Toyota Camry

1 Answer

Camry timing belt


Both the 2.2 Liter 4 cylinder and the 3.0 Liter V6 have a cam belt that must be replaced every 60,000 miles. The cam belt also drives the water pump and for this reason I recommend you replace the cam belt at 120,000 miles when you replace the cam belt the second time. Neither engine is an interference engine.

Jun 16, 2010 | 1995 Toyota Camry

3 Answers

I need a spark plug wire diagram for a 1992 Toyota Camry 4 cylinder


1992 Toyota Camry Sedan
3.0 liter DOHC V-6 (3VZ-FE)

Cylinder # Front, passenger to drivers side 2-4-6
Cylinder # Back, passenger to drivers side 1-3-5

Distributor 12 O'clock post # 6 cylinder
10 O'clock post #1 cylinder
8 O'clock post #2 cylinder
6 O'clock post #3 cylinder
4 O'clock post #4 cylinder
2 O'clock post #5 cylinder

Good luck and hope this helps.

Jan 12, 2010 | 1992 Toyota Camry V6

2 Answers

Timing chain or belt?


The 2002-2006 Camry received the next generation 2.4L 4-cylinder engine (model 2AZ-FE), which combines decent power with excellent fuel economy. This engine does not have a timing belt, it has a chain that does not need to be replaced.
The second choice is very smooth and powerful 3.0-liter 24-valve all-aluminum V6 engine.
Starting from 2004, the 3.3-liter V6 DOHC VVT-i engine is available on SE V6 model.
Both, the 3.0L and 3.3L V6 engines have a timing belt that must be replaced at certain interval

Nov 15, 2009 | 2003 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,008 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...