Question about 1998 Chevrolet Malibu

Open Question

I need to know the size of the bolts that hold the caliper bracket on in the front break assembly Thread type and size

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: brake caliper removal

Sometimes they use a T-50 torx bit, and sometimes they use either a 15mm or 18mm bolt, however the caliper bracket is a 21mm bolt

Posted on Oct 06, 2008

Ad
  • 72 Answers

SOURCE: Front Hub Bearing Torque specs to complete replacement

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Posted on May 09, 2009

  • 333 Answers

SOURCE: Replacing front wheel hub assembly on 2006

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs

Posted on Sep 10, 2009

Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"

  • 226 Answers

SOURCE: cannot remove rear brake caliper

Try using a "c" clamp and push the piston in all the way on the caliper. Take the lid off the master cyl first. Lee

Posted on Oct 11, 2009

  • 5 Answers

SOURCE: need hex size for front brake caliper bolts

3/8 alen wrench is what I used.

Posted on Jan 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What size allen needed to remove break pads


Allen wrenches usually come in a set, try 3/8.

Apr 30, 2016 | 2008 Chevrolet Chevrolet Impala LS

1 Answer

I need to know the size of the bolts that hold on the brake caliper housing and the bolts that hold on the brake caliper


I believe the brake caliper bolts at the slides are 13MM hex and the bracket bolts are either 18MM or 21MM

Nov 07, 2009 | 2002 Chevrolet Avalanche

1 Answer

Silverado 1500 Z71 off road, 5.3L. Details on fr


This is for the front: Removal & Installation
  1. Remove 2/3 of the brake fluid from the master cylinder.
  2. Remove or disconnect the following:
    • Wheel
    • Caliper. Suspend the caliper from the frame with mechanic's wire. Do not allow the caliper to hang from the brake hose.
    • Caliper mounting bracket bolts
    • Caliper mounting bracket from the steering knuckle assembly
    • Brake pads from the caliper mounting bracket
    • Clips from the inside ends of the caliper mounting bracket and discard
To install:
  1. Install or connect the following:
    • Clips to the inside ends of the caliper mounting bracket
    • Brake pads to the caliper mounting bracket
    • Inner pad (1 wear indicator)
    • Outer pad (2 wear indicators)
    • Caliper mounting bracket to the steering knuckle assembly
  2. Perform the following procedure before installing the caliper mounting bracket bolts:
    • Remove all traces of the original adhesive patch.
    • Clean the threads of the bolt with brake parts cleaner or the equivalent and allow to dry.
    • Apply red Loctite®272 to the threads of the bolt.
  3. Install or connect the following:
    • Caliper mounting bracket bolts to the steering knuckle. Tighten the caliper guide pin bolts to 74 ft. lbs. (100 Nm) on 15 series or 80 ft. lbs. (108 Nm) on 25/35 series.
    • Caliper
    • Tire and wheel assembly
  4. Refill the master cylinder to the proper level with fresh brake fluid. Pump the brake pedal slowly and firmly in order to seat the brake pads. Burnish the brakes as needed.

Oct 12, 2009 | 2003 Chevrolet Silverado 1500

3 Answers

Can not get rear break caliper off on 2001 Tahoe. Mounting bolts will not come out of caliper to caliper will not slide off.


If the mounting bolts will not come off,buy a complete rebuilt caliper with mounting bracket and hardware. Check that the hardware contains new mounting bolts.
Cut bolts off with a high speed metal cutting disk and remove caliper.
When installing new caliper always use thread lock on all mounting bolts.
Bleed system with new fresh brake fluid and you are done!

Sep 07, 2009 | Chevrolet Tahoe Cars & Trucks

1 Answer

I have a 2000 Passat and going to have my friend replace the rotors and breaks. I am preparing to fix it but want to know what sizes are the bolts for the calipers sliding pins. If you know the Bolt s


For a wrench or for the acctual bolt size.
To remove front pads..you need 8mm allen socket to pull the caliper guide pins, then 17 or 18mm..To remove rear pads...you need 13mm socket for lock bolt on guide pins and 15mm open end wrench (thin section to hold guide pin while you remove lock bolts..I ground down a spare wrench). You DO NOT have to remove rear carriers to change rotors..just remove lock screw and angle rotor out. The B5 Passats don't have the electronic parking brake so you don't need VAG Com to change pads.
Installation tips:
Clean and regrease the guide pins with "synthetic caliper grease"
Rear lock bolts come with preapplied thread locker and "are not to be reused"..I just wire brush the threads and use some Loctite Blue on em. I smear just a little antisieze on the inside bore of the rotors and on the lock screw threads to prevent corrosion and make next rotor change ez. Torques:
Front caliper guide pins:18 ft lb
Front carrier bolts: 89 ft lb
Rear guide pin lock bolts:26 ft lb
Wheel lugs: 89 ft lb

May 29, 2009 | 2000 Volkswagen Passat 4Motion

2 Answers

DONT KNOW HOW TO REMOVE THE BREAK CALIBER


To remove the caliper, you need a torx head tool (can't remember exact size) to remove the two slide pin bolts.(inside the two small rubber boots at each end of caliper) After getting them loose, remove the brake hose, then remove bolts and caliper. (don't loose the two copper washers...if they aren't in the new caliper box you will need them.) Check and see if the caliper retracts easily after it is removed. If it does, the rubber brake hose may have internally failed and is your problem. If piston is very hard to move, get a new caliper. Replace both side brake pads, not just side you are workingon. (recommend both calipers as well but most times it works fine with one.
When replacing, make sure slides are free in calipers and thread pins by hand so that you don't cross thread them. After it's back together bleed front brakes and before moving car step on brake to re-set pistons.

May 23, 2009 | 1994 Pontiac Grand Prix

3 Answers

2006 subaru legacy remove front brake rotor


Hello, hope this info helps...(subytech1)...



REMOVAL
15-INCH TYPE

  1. Lift-up the vehicle, and remove the front wheels.
120334720


  1. Remove the caliper body and the support from housing, and suspend it from strut using a wire.
120334721


  1. Remove the disc rotor. NOTE: If the disc rotor seizes up within hub, drive the disc rotor out by pushing with an 8 mm bolt in holes B on the rotor.
  2. Clean mud and foreign particles from the caliper body assembly and the support. 16-INCH TYPE Refer to 15-inch type. 17-INCH TYPE Refer to 15-inch type.
INSTALLATION

  1. Install the disc rotor.
  2. Install the caliper body and the support to housing. Tightening torque: 80 Nm (8.2 kgf-m, 59 ft. lbs.)
  3. Install the front wheels.

Mar 27, 2009 | 2006 Subaru Impreza

2 Answers

I NEED A DIAGRAM OF 92 LUMINA SEDAN FRONT BREAK ASSEMBLY


That is the brake caliper bolt. It secures the brake caliper to the caliper bracket.
Please remeber to rate this fix.

Feb 14, 2009 | 1992 Chevrolet Lumina

Not finding what you are looking for?
1998 Chevrolet Malibu Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...