Question about 1993 Toyota 4Runner

1 Answer

Hi, i have a 1992 2.8ltr diesel hilux and when i get to a slight incline it loses power you can have your foot flat in 3rd 4th or 5th and wont accelerate but when you get on the flat it goes fine. it only happens when the car heats up. also when you are driving the steering is all over the place would it be bearings

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,359 Answers

Check your service record for the last fuel filter change. 2 years or less is the recommended interval.

Top off you fuel tank to 1/2 or higher. A weak/failing fuel pump will give losing power condition on hill / high altitude / hot day.

Check the injectors and return lines (top of the injector) for leaks.

When was your last valve adjustment?
Head adjustment should be 1-2 years.


Posted on Jul 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need cylinder head torqe settings for ford ranger 2.2 diesel


1st 25, 2nd 45, 3rd 80-85,
4th pass warm engine, 5th 80-85 again all torque specs in foot pounds

Apr 05, 2017 | Ford Ranger Cars & Trucks

1 Answer

Loud noise in 5th gear starting at 45mph


Sounds like it might be a transmission mount or engine mount faulty

Nov 17, 2015 | Cars & Trucks

1 Answer

What is D3 in autogear


it will be more noticeable at highway speeds if you use D3 as the transmission won't use the 4th and 5th gears. This will result in higher engine revving (watch the tach) and will use more gas. The car may feel like it's accelerating faster at these speeds, but at the same time, engine braking will slow it more when you take your foot off the gas.King Scanner G3 for Toyota Tis and Honda Him

D3 exists if you are going up (or down) a mountain and want the engine to be limited to 1st, 2nd, and 3rd gear rather than "searching" for the best of 3rd, 4th, and 5th frequently (although with the grade logic Honda employs this has never annoyed me). ymmv (your mountains may vary).

D3 Doesn't hurt anything; slightly more fuel consumption as the engine will rev higher, but better to be in "D" for normal driving and let the transmission use its full range of gears

Apr 26, 2012 | Cars & Trucks

2 Answers

86 jetta diesel, high reving 5ht gear


wierd not normal. are you sure you have eased off the throttle enough just before you dip the clutch, diesels can lag slightly, is it a turbo? turbo could create even greater lag

Jan 11, 2010 | 1985 Volkswagen Jetta

1 Answer

I have an 85 3.3ltr turbo diesel nissan patrol and all of a sudden it has no power, used to be able to cruise along in 5th on 110kmsph, now im in 3rd trying to do 40kmsph, cant even make it up a slight...


check air filter and air intake animals love living under the hood
open air box and try a hill
also whens the last oil chsnge

could also be a pluged fuel filte

Jan 07, 2010 | 1985 Nissan Pickup

1 Answer

I HAVE A SLIGHT PURRING SOUND FROM THE ENGINE... WHEN I PUT THE CLUTCH IN IT STOPS... ALSO WHEN IM IN 1ST, 2ND AND 3RD GEAR WHEN IM ACCELERATING THERE ISNT A GOOD SOUND FROM IT!! BUT ITS FINE IN 4TH AND...


This would be most likely the first noise of a wearing input shaft bearing. It will only get louder, and eventual failure of the bearing will probably mean catastrophic gearbox failure. It stops when you put your foot on the clutch because the gearbox stops spinning then, and it is quiet in 4th and 5th because there is no side loading (as there is in 1st, 2nd, and 3rd) on the failing bearing. It wouldn't matter what sort of car it was, the gearbox should be overhauled as soon as possible.

Sep 25, 2009 | 2005 Suzuki Swift

1 Answer

1st, 3rd & 5th gear


how about the 4th gear?

if its fine in the 4th gear, its your transmission. if you have automatic I would try to replace the auto trany computer if you could find it at the wrecking yard.

Aug 14, 2009 | 2003 Hyundai Santa Fe

1 Answer

Hang up in third gear loss of power


Hi All

I have a s40 1.9d / 2000 plate,
In the last month or so the car loses revs when changing up to 3rd and 4th gear, I can only get 50 mph max in 3rd gear 80mp in 4th.
The car has just clocked 185,000 miles
Its a great car but a pai at the moment, I've had a service including fuel fillter change added fuel cleaners to the deilsel all to no avail


Any suggestions

Jul 06, 2009 | 2000 Volvo S40

1 Answer

What different gear box can fit honda integra xsi vtec 1600cc b16a? i want to change my gear box ,and i want to know what exactly other gear box can fit my car?thanks its a integra bot the product can show...


J1/S1 Found in: Integra XSI/RSI (DA6) Type: Cable 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400 Y1 Found in: CRX/Civic (optional LSD) Type: Cable 1st: 3.166 2nd: 2.052 3rd: 1.416 4th: 1.103 5th: 0.870 R: 3.000 FD: 4.266 YS1 Found in: Integra 92-93 XSI/RSI (DA6, DA9) Type: Cable 1st: 3.307 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.880 R: 3.000 FD: 4.400 S80 Found in: Integra Type R 98+ (LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.785 S80/Y80 Found in: JDM SiR-G (optional LSD) Type: Hydraulic 1st: 3.230 2nd: 1.900 3rd: 1.360 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.400 Y21/Y80/S80/S4C Found in: JDM 96-97 Integra R(LSD) JDM Civic R [EK9](LSD) JDM Civic SiR [EK4, EG6] JDM CR-X DEL SOL SIR (EG2)(optional LSD) USDM DEL SOL VTEC (EG2)(OPTIONAL LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400

Jun 08, 2009 | 1990 Honda CRX

Not finding what you are looking for?
1993 Toyota 4Runner Logo

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...