SOURCE: 1998 NISSAN ALTIMA FRONT END NOISE / RT SIDE GRINDING NOISE,.... BEARING?
CV joint has gotten debris and moisture inside. The CV boot is bad and not protecting the joint. Now its metal on metal grinding. This happens when turning as there is more pressure on the joint. Please fix this ASAP as it can be dangerous to drive on a bad CV joint. While I have seen people drive with a bad CV joint for over 4k miles, it is NOT recommended!
SOURCE: nissan altima 2005 noise from engine
i had the same issue had the alternator replaced and their is no longer a noise.
SOURCE: 2000 nissan altima
your cv joint is bad. Instead of fixing the cv joint it is actually easier and cheaper to have or replace the entire axle your self. Because it comes with a cv joint and you get a new axle also.
SOURCE: i have an 03 nissan altima engine makes loud clicking noise
1st check the the oil level and the vehicle's oil type.(owners manuel) 5w30-10w30
10w 30 is a thicker oil and could possibly be causing this.(Moves more freely through the engine heats the oil)
SOURCE: 1999 Altima: My 1999 Nissan altima is making a loud whining noi...
you call it the serpentine belt, we call it the fanbelt.it,needs tightening,slightly loosen the alternator, then pull away from engine and tighten belt, tight enough when you can move longest part of the belt, between pulleys, 1/2 inch in/out.
if squeel re occurs fit new belt.
86 views
Usually answered in minutes!
×