Question about 2004 Dodge Ram 2500

1 Answer

Fan motor goes off and on. I found the harness under the column. When i move it is goes off and on. Any problem pulling it apart to clean?2004 dodge 2500 4wd diesel

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 166 Answers

Hi clean all connectors and check for hot spots on connectors. some times it there burnt bad you half to buypass the connector. good luck

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace the ac blower fan on a 2006 cayenne?


normally the armature of the fan is supported by phosphor bronze bushes that are self lubricating. However if there has been water present then the bushes dry out and make a noise or seize up . If you are mechanically minded and you can get to the motor ,pull it apart and lubricate the bushes with sewing machine oil . If not replace it with one from the wreckers .

May 24, 2014 | 2004 Porsche Cayenne

1 Answer

Sparks under steering wheel of dodge ram 1500 2003


My blower on my 04 would randomly cut off but if you tilted the steering it would sometimes work again. Pulled the cover off the steering column and found that one off the connections(plug ins) was arking. Squeased connection closed a bit more with a small screw driver and put some electrical dilithium grease in it and haven't had a problem since.

Mar 05, 2013 | 2004 Dodge Ram 1500

1 Answer

When lowering sterring column my headlights cut off


the head light switch is in the multifunction switch under the steering wheel. its wiring harness comes out from under the cosmetic cover of the steering column and attaches to the car's wiring. You need to get your head up under the dash and see where the connector plug/socket is being pulled apart by the downward motion of the column. or just leave it forever in the full up position. i would do a search on youtube for "dodge ram dashboard" and hopefully you can watch someone else doing it to see how the lower dash comes out on the driver side.

Dec 29, 2010 | 2000 Dodge Ram 1500 Truck

2 Answers

The blower motor for A/C will stop, if you lift the tilt stering wheel up the blower will come back on. Now it won't run at all.Don


chech for loose wiring on the ignition. remove the steering cover and with key on engine off stand out of the way of airbag and wiggle the electrical connector and see if u can duplicate problem also check 4 chaffed wiring

Oct 04, 2010 | 2004 Dodge Ram

4 Answers

2001 ISUZU RODEO, FAN SWITCH FOR A/C WORKS INTERMITANTLY, WHEN ON HIGH SPEED BLOWS AT SLOWER SPEED. aLSO FAN WILL JUST GO OUT SOME TIMES ON STARTUP THEN COM ON LATER. A/C UNIT IS RUNNING BUT NO AIR BECAUSE...


The motor goes bad because leaves and such make their way down and clog it's air intake. Pick up a new one at your local auto parts store if you have to.

It's four screws on the motor housing, located under the glove box (2 screws) and the wiring is harnessed, so no sweat there.

While it's off, reach up into the cavity that feeds it air on the upper left.

You may want to wear a glove. The design on this generation Rodeo is horribly flawed. I pulled a squirrel-sized wad of rotten leaves and pine needles from mine after replacing the motor and resistor twice.

Like drinking a milkshake through a coffee stirrer, you know that's bad for a motor. I clean mine out every fall, before running the heat non-stop all winter.

Jul 31, 2010 | 2001 Isuzu Rodeo

1 Answer

2004 dodge ram 1500 front windows will not always operate


pull door pannel of and get there pull mottor out on window two bolts on back pull window motor apart and clean dust out greaser her back up

Jan 02, 2010 | 2004 Dodge Ram 1500

2 Answers

Holden rodeo 98' 4wd petrol v6


We had a similar problem . The resistor was burnt out, ( Can be fixed with a soldering iron) bit the fan was jammed . I aplied wd40 and slowly worked it by hand and it finally started to work again.. Saved me a rsisitor cost and a fan replacement. Good luck, Joe

Jul 22, 2009 | 1998 Isuzu Rodeo

2 Answers

2004 dodge ram 3500 blower motor intermittant


remove steering column covers and check connections at ignition switch..had a truck recently at dealership with similar problem and connector at back of ignition switch was melted..wires were for blower motor and battery feed to switch..had to replace switch and connector/pigtail

Mar 25, 2009 | 2004 Dodge Ram 3500 Truck

2 Answers

Blower motor makes loud noise when on high


I have a 2004 dodge ram 1500 with the same problem, vibrating blow fan when on high, pulled the blower fan out and found a piece of the hinge from the recirculation door and felt the recirculation door sitting up on the vent of its hinge. Crappy engineering once again.

Feb 14, 2009 | 2004 Dodge Ram 2500

2 Answers

Blower motor for heat and ac would only come on when I messed with the tilt wheel. Now it wont work at all.


Try the ignition switch, dodge has them on backorder so there is a problem that just has not got big enough to recall. The switch is only $14.30 unless you have a V10. Mine started off as the turnsignals quit working unless you moved the tilt steering and the the heater would only work in the tilt up position.

Sep 29, 2008 | 2004 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...