Question about 1995 Ford Mustang

2 Answers

I may need to replace the automatic transmission out of my 1995 mustang GT convertable. I need the factory name or the specs of the tranny so I can look around and be sure I am getting the right transmission

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I have a 94 auto vert and it IS an aode, not an aod. Aod is in 1993 and older. The part is: 4R70W

OUR cars do not have the manual OD, it is elec and is a button next to the shifter. Sorry calisunn25, you are wrong4R70W 4R70W

Posted on Jul 19, 2009

  • Darqflame
    Darqflame Jul 19, 2009

    Dannyboy8519: I have done a little more looking. I found a great page that you can probably glean some information from. I actually learned a few things. I was right, the aode was in 94-95 only, however I did think the aode and 4R70W was the same, apparently not and I apologize for that. The following link really gives some great info for us in the 94-95 Stang years:http://tccoa.com/articles/tranny/transmi...

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

YOU HAVE A AOD,NOT AN AODE. YOU'RE AOD HAS A MANUAL THROTTLE VALVE CABLE WITH MANUAL OVERDRIVE SELECTIVE BY LINKAGE. AODE HAS ELECTRONIC OVERDRIVE ACTIVATED BT A BUTTON AND MORE INTERNAL ELECTRONICS,THIS ONE WON'T WORK. TRY GETTING A REBUILD ON IT,MAY BE CHEAPER WITH A WARRANTY! GO SOME WHERE RELIABLE THOUGH LIKE DEALER.

Posted on Jul 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many quarts does a 92 chev silverado transmission take


I looked at info for 92 chevy c1500 pickup--5.7L engine, automatic. My database on that model year, won't say, Silverado.
I'm not a tranny person, I doubt you can totally drain the tranny and the torque converter has fluid. I don't like to change tranny fluid on older vehicles, I've seen too many people have problems. If the specs aren't correct, blame the database, not me. Keep an eye on your tranny dip stick.

tranny-nnqb5mmr4qaitcmx0vjerajr-1-0.jpg

Aug 07, 2017 | Cars & Trucks

1 Answer

Automatic transmission in a 1995 nissan pickup


Check fluid level add if needed with proper factory rated tranny fluid, if this does not work it could be multiple sensors not working properly or tranny needs replacement.

May 07, 2014 | 1996 Kia Sephia

1 Answer

Problems removing 98 ford mustang transaxle


If you are talking about the axle hub nuts,then you may have to use an air impact socket driver and impact sockets.These nuts can be torqued to over 140 FT LBS. Let me know if you need more help.MOE

Jun 22, 2010 | 1995 Ford Mustang

1 Answer

How do i replace a tcc solenid in a 95 beretta 3.1 v-6


its just a sensor plug on the tranny, the solenoid reads the speed of the transmission (car) and sends the signal to the computer which identifies that the car has reached proper crusing speed and is not under heavey load (full throttle) it then "locK" the torque converter to not allow any slippage like a standard automatic torque converter, basically making the torque converter act like a clutch,,, thus the name TCC torque converter clutch. So to help you out just unlug the sensor/solenoid and it will stop locking up your converter. Problem solved! MOney saved 2 to 3 hundred bucks!

May 04, 2010 | 1995 Chevrolet Beretta

1 Answer

What is the maximum safe flywheel horsepower for a 2008 mustang gt? I would like to put down 425rwhp... which equates to about 500 figuring 15% drivetrain loss.


Your question is a professional one so I will have to have more information to answer you other than:
The factory flywheel is not rated for more than 300 hp.
There are professionally built automatic transmissions costing thousands of dollars that are made to deal with this kind of horsepower. With your goal of 425 at the rear wheels you will need to beef up the entire drive train. This can include the transmission - flywheel - drive shaft and u joints - rearend - drive axles and lug bolts and even the wheels.

Please purchase items specifically for your horse power and -- use a transmission blanket - and a safety loop for the transmission.

Please take your vin# to the dealer and ask them for the factory specs - they will share them - however if you bought the car used - you are best to assume the items mentioned are less than perfect and perhaps needs to be replaced because there is no guarantee they are the factory items.

Also - remember to put larger brakes on the car - as the bullet you're building is going to need to stop too.

Best of it

Jan 28, 2010 | 2008 Ford Mustang

1 Answer

I have a 1995 ford mustang automatic. I drive the


Check the transmission fluid level and cleanliness.
If it is low, add fluid. If it is dirty or smells burned, take it in to a decent transmission repair shop and be prepared to mortgage your home.

Oct 10, 2009 | 1995 Ford Mustang

1 Answer

Rebuilding 1995 honda civic transmission


Did you make sure that the tork converter was all the way forward first if not then you will need to take the transmission back out and make sure that the converter has either automatic trany fluid in it or 184/85 gear oil depending on whether or not you have automatic trasmission or manual fill it up until you can put your finger in it and then rotate converter clock wise and it should slip into place before putting trasmission back into car and if after doing that and you still are having trouble take it to a transmission shop to have them do it for you.

Sep 14, 2009 | 1995 Honda Civic

1 Answer

Mustang Transmission leak


it is possible it is bad. It is also very possible that the fluid is too low to work correctly. If the fluid level is right, Id say the tranny is no good.

Nov 21, 2008 | 1999 Ford Mustang Cobra

2 Answers

96 mustang gt tranny problem


my 96 mustang wont go into gears what must i do my is winston

Jun 07, 2008 | 1996 Ford Mustang

Not finding what you are looking for?
1995 Ford Mustang Logo

513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...