To get your solution of your problem visit this site
Best Manuals
The
engine and the automatic transmission in this vehicle are computer
controlled and in most cases when a fault occurs a fault code is
stored in the memory of the computer control module. There are
exception to this, such as the Mass Airflow Meter and fuel pressure
problems. What must be done is to have all the basic testing done
such as a scan of the system for fault codes as well as a check with
a live data scanner tool for engine functions that are not within
range of normal, a trained technician is required to know what is
correct and what isn't, then based on careful diagnostics done from
a factory repair manual the correct part is replaced or the wiring
repaired or the computer replaced (known as the PCM), which is very
rarely the problem. Other basic checks must be done as well such as
mechanical problems with the engine as well as engine state of tune
and mileage on the engine. The transmission can have mechanical
issues as well such as no gear engagement at all or a failed pump or
other pressure related problems.
When I turn on the heat in my 2004 mazda mpv the front air vents blow heat but the rear air vents are blowing cold. I have adjusted every setting is there something I am overlooking.
196 views
Usually answered in minutes!
×