Question about 1995 Oldsmobile Cutlass Supreme

2 Answers

Replacing brakes on caliber back caliber stuck out how to get it back in diagram would be helpful

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 34 Answers

Calipers is a common problem with that model but you need a special tool to push and turn the piston back in if its not frozen up due to corrotion. auto parts chains usally can rent or loan you the tool you need.

Posted on Jul 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Mine have done that, i just use a Hammer and slightly;y tap it back! if it doesn't want to budge, give it a slightly harder tap, if nothing, then it may be a write off, time for a new one!

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to release brake caliper pressure on 2000 nissan sentra


Hi Shelby,what are you trying to do?To release pressure,get a wrench and open up the bleeder valve their,get a rag to catch the fluid.Here's a link to a diagram of the bleeder valve.Also here's another link on bleeding,Is your brakes sticking,you may need a new caliber. Repair Guides Front Disc Brakes Brake Caliper AutoZone com Here's how to bleed. http://www.autozone.com/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f80381ef5 Here's another link on replacing your caliber. Repair Guides Front Disc Brakes Brake Caliper AutoZone com Here's a link to a new caliber. Brake Caliper Front

Aug 26, 2016 | 2000 Nissan Sentra

1 Answer

Gear shifter stuck in park on 2008 dodge caliber


the brake light switch control the shifter. replace the brake light switch.

Apr 04, 2014 | 2008 Dodge Caliber

1 Answer

1994 Fleetwood Coronado 33' motorhgome. Front brakes stuck on. Changes the pads, calibers. Test drove, stuck on again. Checked back, roll free / ok. Replaced the master cylinder, re-replaced the b


Sometimes the rubber brake lines that flex and go to the calipers can break down inside and start to deteriate and they can act like a check valve, they will let fluid through one way but not the other way, if you havent replaced them i would suggest trying that

May 27, 2012 | Cars & Trucks

1 Answer

How to change 2001 crown victoria brake pads


Jack up car, remove the wheels, take out the two retaing bolts on the brake caliber, slide caliber up off brake disc, remove old brake pad, use a C-Clamp or big pair of Channel locks to compress the piston in to the brake caliber, Insert new brake pads onto caliber, slide brake caliber back over brake disc, reinstall the 2 retaining bolts. put tire back on. Repeat this till you have replaced all pads that you are going to change. ***Caution.. Before putting the car in gear, crank it up and pump the brake pedal till you have a firm brake pedal. If you fell to do this you will have no brakes due to the pistons on the calibers are compressed and are not seated on the discs.

Jan 08, 2011 | 2001 Ford Crown Victoria

1 Answer

How do I remove rear brake rotor? I need to replace the mount for brake caliper.


they can be such a pain because they get stuck on if you can get to the adjuster through a small hole in either the front or back of the drum adjust it so the brake shoes are not making contact then tap the drum with a hammer and pull it off you may have to prie at it with a tire tool i used two of them and worked it off the pads it gets stuck baddly on the center axle.If you don`t mean drum brakes then the brake caliber has two bolts at the back that need loosened up as far as possible and then the caliber will come off bylifting it off you may have to gently prie it up off there next is the center cap remove that and then cotter pin there should be a large bolt to remove take it off be carefull of barrings then the disk should come off. Hope this helped.

Oct 24, 2009 | 1999 Ford Explorer

2 Answers

Caliber bolts are stuck


If that is the problem...put your allen wrench or socket on the bolt. Then put a CRECENT wrench on that end of your ratchet....you need leverage....trust me, it will break loose.

Mar 13, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Brake problem toyota carina e "94


sounds like break hose is not letting fluid run back to resavor. have you done a break job lately and maybe kinked a line. break lines ar two way, fluid to caliber and returns to resavor thru same line. you also might have a caliber sticking.

Jan 23, 2009 | 2005 Toyota Corolla

1 Answer

2004 Chevrolet Silverado Extended Cab brake replacement


jack the truck up and take the passangers tire off. look behind the rotor you should see 2 bolts holding the caliber on to the rotor. loosen those and take them out. from there you should be able pull up on the caliber this will take the caliber and pads off together. take the pads out of the caliber and install the new ones .

BECAREFUL not to twist or bend the caliber to much or you will bend the brake line.....

once you have installed the new brake pads in the caliber. put the caliber back on the rotor. if they will not fit release the bleader valve to release the pressure. than you should be able to slid the caliber back onto the rotor. once you have done that close the bleader valve. reinstall the 2 bolts to hold the caliber in place. put your tie back one. Follow these steps for the other side.

now once that is done. you might want to blead the front breaks.
what you do is have someone help you. fill the brake resiviour with brake fliud. than start your truck.
Have someone in the cab to press the brake. What you want to do is turn the wheel so you can get to the bleader valve. once you can get to it open it up. have the person in the cab other truck press the brake until you see a steady flow of brake fluid coming out of the caliber. once you see that have the pseron press the brake once more and hold it to the floor.
close the bleader valve.

now do the same thing on the other side. But, make sure you check your resivour fluid first.
This is to make sure you don't have any air in the lines. after you are done with both side put it in gear and hit the brake make sure you stop......... If that works go about half the block down and hit the brake again to make sure you stop......
once you have done that and are comfortable with the way the truck stops than ou are good to go and now know how to change the brakes for future refrence..... be aware the back brakes are diffrent.........

let me know when you are ready for the back brakes.
do not blead the front ones if ou intend to do the back brakes afterwarwords......

if you are only doing the front brakes you must blead the the passanger side first......... if you do not have the bolts holding your caliber on than you will have a pin the you will take a hammer to and knock it out that will release them....

Aug 01, 2008 | Chevrolet 1500 Cars & Trucks

1 Answer

Disc brakes replacement


jack the truck up and take the passangers tire off. look behind the rotor you should see 2 bolts holding the caliber on to the rotor. loosen those and take them out. from there you should be able pull up on the caliber this will take the caliber and pads off together. take the pads out of the caliber and install the new ones .

BECAREFUL not to twist or bend the caliber to much or you will bend the brake line.....

once you have installed the new brake pads in the caliber. put the caliber back on the rotor. if they will not fit release the bleader valve to release the pressure. than you should be able to slid the caliber back onto the rotor. once you have done that close the bleader valve. reinstall the 2 bolts to hold the caliber in place. put your tie back one. Follow these steps for the other side.

now once that is done. you might want to blead the front breaks.
what you do is have someone help you. fill the brake resiviour with brake fliud. than start your truck.
Have someone in the cab to press the brake. What you want to do is turn the wheel so you can get to the bleader valve. once you can get to it open it up. have the person in the cab other truck press the brake until you see a steady flow of brake fluid coming out of the caliber. once you see that have the pseron press the brake once more and hold it to the floor.
close the bleader valve.

now do the same thing on the other side. But, make sure you check your resivour fluid first.
This is to make sure you don't have any air in the lines. after you are done with both side put it in gear and hit the brake make sure you stop......... If that works go about half the block down and hit the brake again to make sure you stop......
once you have done that and are comfortable with the way the truck stops than ou are good to go and now know how to change the brakes for future refrence..... be awar the back brakes are diffrent.........

Aug 01, 2008 | 1992 Chevrolet K1500

Not finding what you are looking for?

Open Questions:

See all 1995 Oldsmobile Cutlass Supreme Questions

1995 Oldsmobile Cutlass Supreme Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...