SOURCE: change spark plug wires on 04 kia sedona
REMOVAL OF THE PLUGS:
Do not attempt any maintenance on spark plug if engine is hot.
1. Disconnect negative battery terminal.
2. Carefully remove high-tension leads.
3. Use compressed air to blow any dirt or debris from around spark plug hole.
4. Check that spark plug fits squarely in spark plug socket and remove spark plug.
Raise a vehicle and install SST(OK552 131 001) in order to replace cylinder 2, 4, 6 spark plug.
INSTALLATION:
1. Install spark plug into cylinder head.
Tightening torque : 18~22lb-ft (25~30N·m, 2.5~3.0kg-m)
2. Reconnect high-tension leads.
3. Reconnect negative battery cable.
Hope this helps and simple to understand. Good luck
SOURCE: how do you replace the timing belt on 2004 kia sedona?
$1800.00 sounds like a fair price if you live in north Chicago, New York city, or California
SOURCE: Peugeot 206 1.1 1999 runs but has loss of power
poss ecu fault mate very common fault these guys might be able to help click the link
http://ecutesting.com/peugeot_106_1_1_2_4_ecu_026120.html
SOURCE: 2004 Kia Sedona Timing belt and plug replacement
I'm not familiar with the Sedona but it's very likely that it is much easier to do the plugs when the engine is disassembled for the belt job. If the plugs are due fairly soon anyway, it would save you a lot of money if you just pay for the plugs now and you don't have to pay for all the labor to get at that area of the engine again.
Testimonial: "Thanks for the information! We will proceed as suggested."
SOURCE: 05 Kia Sedona 2.9 diesel, sometimes doesnt start
if the immo light doesnt come on it means the ecu has left the immobilizer on. it is a commen fault on kia. if you lock and unlock the car or sometimes just take the key out the ignition then put it back in it sorts the problem. if you dont see the IMMO light dont attempt to start it because it wont fire
56 views
Usually answered in minutes!
×