How can I turn off maintenance light? - 2008 Toyota 4Runner SR5

If you take your civic into a Honda dealer for regular maintenance they should reset it for you. Even most Lube shops do as well. But if you do your own vehicle services like oil changes (which is what that light is there for) then here's how you can reset it.

1. put your key in the ignition but do NOT turn it.
2. press and hold the Odometer/Trip button.
3. while holding the Odometer/Trip button, turn the key to the ON position but do NOT start the engine.
4. As you hold the Odometer/Trip button, after about 10-15 seconds the Maintenance required light should turn itself off.
5. Once the Maintenance required light is off, turn the key into the off position then release the Odometer/Trip button.

That should do it. Hope this helps

There are 2 way to reset the maintenance light on Civic.
1. Manually reset
To reset this maintenance light, you will put the key in the ignition. Next you will press and hold the odometer reset knob, which can be found on the dash where the car's current mileage is located. While you continue holding that know, you will turn the key to the first position but do not start the engine. After about 10 seconds, the maintenance light should disappear. If the light is still on, you can turn off the vehicle and then try the process again. Once the light is off, you are all set until your next schedule maintenance.

2. Hook up a HDS (Honda Diagnostic System) software on a laptop, the light will go off within minutes.

http://www.obd365.com/wholesale/honda-hds-him-diagnostic-tool-with-double-board.html

When your vehicle is coming up for due maintenance, the light will flash for a few when you start the car. When the time for scheduled maintenance is due, the light will remain on constantly. It's just routine maintenance, but if you haven't done it, that's your reminder. Then, you or your mechanic will have to reset that maintenance reminder light.

Ive never heard of a timing belt light, but there is a maintenance light that can be reset. Here the procedure:

To reset the maintenance reminder light: Turn the ignition switch to the "ON" position. Set the odometer/trip display to the odometer (ODO) mode. Turn the ignition switch off. Depress and hold the trip meter reset button while turning the ignition switch to the on position. The maintenance reminder light will, illuminate for 3 seconds, blink for 2 seconds, illuminate solid for 1 second and then turn off. Release the trip meter reset button. Turn the ignition switch to the off position. Turn the ignition switch to the on position. Confirm that the maintenance light goes out.
Let me know if this helped you out!

depending on why it was turned on. Honda had designed the car to come on every 15,000 miles To reset your maintenance light, follow this procedure

Odometer reset button procedure

1. Turn the key to the II position (but not to III, or START)
2. Turn the key to the 0 (OFF) position, then push -- and hold -- the trip odometer reset button
   
3. Turn the key back to the II position, while still holding the button
4. After about 10-15 seconds, the light should go off
5. Release button and turn key to 0.

If the light comes right back on withing 20 minutes then you would need a required maintenance

This procedure works for recent Volvo cars.

Use a narrow object(like tip of a pen) and push the 'red' build-in button around the instrument panel and the button will turn back to green and the maintenance required light will go off.

Disconnect the negative battery cable? It might clear the code.

No its easy . here are the steps turn ignition to acc/ first turn hold reset button located next to odometer rest button. Hold this button for 30 seconds. then turn ignition to next turn/click where lights come on on the dash ex brake air bag etc. hold for another 30 seconds. The maintenance light should flash and go out start vehicle and your maintenance is done. Good luck ad thanks for using FIX YA