Question about 2001 Isuzu Trooper
I took the belt off not looking first to see a sticker under the hood some where. i have 7 pulleys
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Pop the hood and locate the belt tensioner on the front of the engine, which has a square hole in the middle of it. Stick the end of the 1/2-inch breaker bar into the hole and turn the bar counterclockwise to release tension on the belt. Then pull the old belt off of the pulleys and remove it from the engine.
Open the owner's manual and locate the belt routing diagram for the engine. If you can't find the owner's manual, there is a sticker under the hood that shows the routing diagram as well. Start installing the belt around the pulleys according to the diagram until you can't pull it any further.
Pull the breaker bar again, turning it counterclockwise, and put the belt around the tensioner. Then release the tensioner and visually inspect the belt to make sure it's not twisted or bent any odd directions, and make sure that the belt is sitting squarely in each pulley. If not, pull up the tensioner with the breaker bar again and adjust as necessary.
Jan 12, 2012 | 1994 Isuzu Trooper
on Sep 07, 2010 | Isuzu Trooper Cars & Trucks
Jan 31, 2011 | 2001 Isuzu Trooper
Jan 04, 2011 | 2001 Isuzu Rodeo
Aug 26, 2010 | 2006 Toyota Sienna
Apr 16, 2010 | 1996 Isuzu Trooper
Apr 03, 2010 | 1998 Isuzu Trooper
Nov 12, 2009 | 2000 Pontiac Grand Am GT
Oct 18, 2008 | 1991 Dodge Dynasty
4,349 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: