Question about 2002 Ford F150 Regular Cab

1 Answer

Can not turn ignition on. has been sticking. finally ignition lock got stuck in the off position..

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 534 Answers

Try a bit of WD40 (or similar) mixed with graphite powder - squirt or washa bit into the key barrel - it may just free it up.
Otherwise, you require a new ignition switch/lock assy.

Posted on Jul 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key stuck in ignition car stuck in park key won't go to off position


There may be to much pressure on the steering wheel lock for it to go into the off position. put the parking brake on. put the shifter in neutral gently turn the steering wheel in the opposite direction of where the wheels are pointed and try turning the key to the off position. Good Luck

Sep 03, 2016 | Cars & Trucks

2 Answers

I have a 95 camaro, I put the key in ignition and it will not turn the ignition. It's like it's stuck. Replaced the ignition module and still cannot turn ignition. Help!


the ignition module (ignition switch on top of the steering column) normally doesn't get stuck.

things you can try:
steering wheel lock: (the pin gets a "burr" on it and locks everything up) wiggle steering wheel back and forth while trying to turn key.

transmission lock (parking on an incline will jam up the interlock)
push the shifter farther into park while trying to turn the key, or wiggle shifter

Sep 19, 2014 | 1995 Chevrolet Camaro

1 Answer

I have a 2003 Chevy blazer xtreme 4.3 v6 automatic transmission and its giving me some issues with the console shifter and ignition system! Every other time I put the blazer in park and try to take the key...


Fixing stuck key in your gmc envoy same as a blazer !
Ignition Lock Cylinder Control Actuator
If the vehicle is equipped with a floor mounted console gear shifter, it has a ignition lock cylinder control actuator system in the steering column as an added safety feature. The ignition lock cylinder control actuators purpose is to prevent the steering wheel from being locked when the transmission is in gear and the vehicle may still be moving. The column ignition lock system consists of a ignition lock cylinder control acutator, and a park position switch that is located in the A/T shift lock control switch. The ignition lock cylinder control acutator contains a pin that is spring loaded out to mechanically prevent the ignition key cylinder from being turned to the lock position when vehicle transmission is not in the Park position. If vehicle power is lost, and/or the transmission is not in the Park position the operator will not be able to turn the ignition key to the lock position and will not be able to remove the ignition key from the column.

May 08, 2017 | Cars & Trucks

2 Answers

Ignition is in lock position and won't turn on. saab 2000/ 900 3


make sure the stick is in reverse and the key is all the way in the ignition

May 01, 2012 | Saab 9 3 Cars & Trucks

1 Answer

Key stuck in ignition and wont go into lock position


If you have the key tfat broke off stick it in ignition and push in to turn back or wiggle steering wheel back and forth while you turn key back if that dont work tou will have ti replace ignition switch.Thanks

Apr 27, 2010 | 2004 Mitsubishi Galant

2 Answers

'95 rodeo cant turn the key, the key is not stuck,the cylinder is


Try turning the steering wheel while trying to turn the ignition. Didn't work? Can you remove the key? Use some WD40 with the tube and spray a little in. Put the key in, pull it out, repeat several times. Put the key in and wiggle the ignition lock back and forth.(try while wiggling the steering wheel back and forth, too.) Still won't move? Try pulling the key out just a small fraction of an inch and try turning the ignition.

Still no solution, time to give up and call a locksmith.

Jan 23, 2010 | 2000 Isuzu Rodeo

2 Answers

My key is stuck in the ignition. Won't lock.


do not try to put the key in lock. if it will still start, then you will be able to replace the lock cylinder. if you rotate it to lock then you might not get it to turn again. as for the gear selector, there is a release on the shifter. some have a slot to stick a key and push down as you change gears. others you may have to take apart the console, and you will see the release lever.

Nov 12, 2009 | 1994 Toyota Corolla

1 Answer

The Key won't turn all the way. It only turns half-way and will not turn the full rotation to ignite the starter in order to start the vehicle. Please help me!!!


The final quarter turn of the key engages the steering lock. So while inserting your key, at position it gets stuck turn the steering left-right(to & fro) to loosen the locking pin such that now the key is free to turn the ignition. Oiling the steering locking pin would help too...........sodeep

Aug 06, 2009 | 1997 Toyota T100

1 Answer

1994 Pontiac Grand Prix ignition stuck in on position


You are going to have to probably take this somewhere to get fixed the tumblers inside the ignition lock cylinder have become unlocked and are jamming the cylinder.

Aug 02, 2009 | 2002 Pontiac Grand Prix

1 Answer

2002 oldmobile bravada ignition key is stuck in lock position


try and turn your steering wheel a little bit left or right and and the same time try and turn the key when it turns toward the dash then try and turn the key back. try and repeat this several times if neccessary. this should work. please rate this solution. thanks

Aug 30, 2008 | 2002 Oldsmobile Bravada

Not finding what you are looking for?
2002 Ford F150 Regular Cab Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...