Hello . I have a grand Suzuki vitara , petrol 2,0 , J20A engine . Can I know wheather the air mass sensor for other car to be use for it ? Another question is the tappet setting ? Thank u

SOURCE: P0340 CODE

check your timing chain and see if your engine has a tensioner as that may have failed. chain may be just a lil loose

SOURCE: engine management light on ,suzuki grand vitara 2

Take the car to an autoparts store and have them scan the computer for any fault codes stored. The check engine light is to alert you that the computer has noted a fault in one of the car's systems. Getting the codes will show what the computer has noted and curb the need for speculation. Most parts stores will perform the scan for free. Hope this helped and best wishes.

SOURCE: car repair manual for a 1997 suzuki vitara v6 2ltr petrol 24v

Haynes don't cover that engine. I've found a copy of the H25 engine manual which is similar to the H20 engine we have. If you search for SQ416 in google you'll find a copy you can buy or if you're lucky you'll find a free download somewhere like I did!! :-) It has helped me loads.

SOURCE: suzuki grand vitara (J20A) and error code P0340.

p0340 is indicating a problem with the CMP sensor .. thats "camshaft position sensor" ... the 340 would indicate that the sensor is open or shorted (not giving information) ... look for disconnected or defective CMP or CAMP sensor ..

Testimonial: "thanks a lot"

ZJ Limited

• 17989 Answers
• Posted on May 15, 2010

SOURCE: How to change the fuel filter on a suzuki grand Vitara

Fuel FIlter - Removal

1. Relieve fuel system pressure.
2. Remove or disconnect the following:
   Negative battery cable Fuel lines from the fuel filter Fuel filter
   

1. Install or connect the following:
   Fuel filter and tighten the bracket bolt. Note the fuel flow directional arrow. Fuel lines to the fuel filter. Negative battery cable
2. Start the engine and inspect the fuel filter connections for leaks.
   

1. Before servicing the vehicle, refer to the Precautions section.
2. Relieve fuel system pressure.
3. Remove or disconnect the following:
   Negative battery cable Fuel lines from the fuel filter Fuel filter
   

1. Install or connect the following:
   Fuel filter and tighten the bracket bolt. Note the fuel flow directional arrow. Fuel lines to the fuel filter. Negative battery cable
2. Start the engine and inspect the fuel filter connections for leaks.