Question about 1997 Volkswagen Jetta

1 Answer

Alarm won't stop going off and car won't start

When I put the key in the ignition and try and start my car the alarm goes off and the car won't start. Sometimes when I put the key in the doors the alarm goes off. No matter what, the car won't start. I heard that I need to restart the alarm system by putting the key in the trunk, holding it in the lock position for 10 seconds, lock all the doors and then unlock them from the drivers door. But it won't let me lock the doors from the trunk. It seems like my car is trying to protect itself from letting me steal it with its own key!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

YOU MIGHT NEED TO BY PASS THE SYSTEM IF YOU DONT WANT TO MESS WITH IT OR TRY TO ALL THE SENSORS ON THE DOORS MAYTHEYRE NOT WORKING SOMETIMES THE RUBBER SEALS BRAKE AND THEN WATER MAY GET INTO THEM

Posted on Sep 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 jeep wrangler alarm(avital) goes off and


try resetting alarm lower drivers side window and take out keys,disconnect battery and fully charge it , when you reconnect battery alarm will go off ,put key in drivers side door and turn key all the way open and all the locked 3 times then remove key that should reset alarm.

Oct 08, 2014 | Cars & Trucks

1 Answer

Car alarm preventing car from starting


Try removing the alarm system relay, some car alarm has also a fuse on the alarm that you can remove.
Many car alarms unlock by inserting and turning car key while you connect the battery.

Aug 19, 2008 | 1998 Chrysler Sebring

1 Answer

Key won't come out of ignition, car won't start, panic alarm goes off when I try to start it


Sounds to me like you need a new ignition switch. Take the vehicle to a mechanic and have them further evaluate.

Jan 24, 2014 | Volkswagen Cars & Trucks

1 Answer

Trailblazer won't start


Open the door,when alarm goes off insert key into ignition and alarm should go off and it should start,try that.

Jul 16, 2017 | Cars & Trucks

2 Answers

92 Toyota 4runner truck was running perfectly fine Later in the day went to start and the alarm just started going off and wouldn't turn off. Truck won't start even with keys turned in igniti


The alarm system somehow got activated , this is usually because the battery becomes discharged or disconnected try doing this:
Remove the key from the ignition
disconnect the negative battery terminal
put the key back in and turn to ON
exit the truck and leave door open
reconnect the battery terminal
get in and leave door open, if the alarm horn stays off it should start.

Dec 07, 2012 | 1992 Toyota 4Runner

1 Answer

2004 Hyundai Elantra won't start, emergency flashers keep blinking, can't shut off, lights dim, can't jump start, clicking from under dash from relays. What could it be?


The 'Keyless Entry & Burglar Alarm System" is activated. You must 'Disarm' the system using the Keyless Entry Remove (Key Fob) to "Reset" the system. The reason the engine won't start is due to the burglar alarm - it has a "Starter Kill" circuit which is activated when the alarm is activated. The alarm must be DEactivated to DEactivate the 'Starter Kill' circuit.
Another way to start the engine is to get in the car, put the key in the ignition and turn it to 'ON" and wait 3 to 5 minutes until the emergency flashers stop/turn off. Afterward, you should be able to start the engine. NOTE: This does NOT reset the burglar alarm. It will go off again when you enter the vehicle without using the remote/key fob.

Sep 06, 2011 | Hyundai Elantra Cars & Trucks

2 Answers

2000 hyundai elantra alarm goes off where is the


There is NO kill switch on the 2000 Elantra... HOWEVER, there is a thing called the Key Fob (keyless remote entry system). There is, however, a system in place called the 'starter kill' circuit and it is activated when the burglar alarm goes off.... it's called the burglar alarm relay and it is activated to prevent the engine starter system from being used. There are three ways to get the engine started in such a circumstance... 1. use the key fob to 'disarm' the system... 2. put the key in the ignition and turn it to the 'RUN" position and wait until the alarm stops (horn stops beeping and the parking lights stop flashing), then the engine will start.... 3. pull the starter relay from the UnderHood junction box and bypass the starter circuit (key in ignition and in the 'RUN' position), jumper the starter solenoid circuit to energize the solenoid to start cranking the engine -- it should start then.

Oct 03, 2009 | 2000 Hyundai Elantra

1 Answer

How to stop car alarm


If you have a "factory system", cycling the key in the ignition on-off 5 times will shut off the alarm.

Aug 04, 2008 | 1999 Toyota Camry Solara

Not finding what you are looking for?
1997 Volkswagen Jetta Logo

911 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...