Question about 2000 Buick LeSabre

2 Answers

The passenger window of my Buick Lesabre 2000 recently broke. How can I uncover the door to access to the mechanism, and what part should I replace?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The door panel is held on with some screws and plastic clips around the edges. When I went in to the rear doors, I had to pry the panels off and some of the clips broke. Plan to replace atleast a few of them. On the read door the window mechanism is a real "rube goldberg" setup that isn't really fixable. I finally cut the cables which move the windows, screwed in an anchor screw, raised the window to the closed position, and locked them in place. By the way, the local shop said it was a $800 job to repair it.

Posted on Jul 20, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 467 Answers

Must remove all the screws first

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace passenger side glass on both doors


Remove interior door panels and unbolt the window mechanisms. It should be obvous once you ahve the panels off. Study online how to reove the door panels.

Feb 04, 2014 | 2002 Buick LeSabre

1 Answer

Passenger side window "clips" broke on my 1988


check out compnine.com 4 diagram n parts

Jul 19, 2011 | 1988 Buick LeSabre

1 Answer

What is the battery vent hose on the 2000 buick LeSabre for and can the battery be changed without putting the vent hose back on? I put a new battery in and accidentally broke the one side of the hose...


Since the battery is located inside the passenger compartment (under the rear seat), the vent hose is needed to vent the sulfuric acid fumes to the outside of the car - away from the passengers.

Feb 08, 2011 | 2000 Buick LeSabre

1 Answer

This 2000 le sabre has a seperate control for the passenger to adjust temperature. the passenger side blows cold through the dash outlets . the drivers side blows uncooled air.is there an air door thats...


There is a door actuator motor not working,the dash has to be removed to access the actuator motor,if this was helpful,at all,please rate,thank you.

Jul 20, 2010 | 2000 Buick LeSabre

1 Answer

Rear passenger side window won't go down, they are power


If you know you have power going to the door window motor. And it is not working then most likely the motor is bad.
But to be safe listen motor is running try going up & down. Some years of Buick came with belt drive and yours may have broke

Jun 05, 2010 | 1997 Buick LeSabre

1 Answer

N423y@att.net


yes it is called the blend door, you either have a sticking blend door or the actuator motor for the door is defective and does not completely shut off the heater core. The pass side has it's own blend door.

Feb 03, 2009 | 1997 Buick LeSabre

1 Answer

Power window front passenger


I had the same problem on my 1992 lesabre. The solution is to test the window motor itself with an external 12 volt power supply ( I used the car battery and some jumper cable w/ 2 screw drivers - not recommended for amatures! LOL) First remove the door panel which is difficult but you'll figure it out if you are qualiifed to repair your window yourself. Then test the window moptor if it functions (in both directions) THEN IT IS THE WINDOW SWITCH, A FUSE OR A RELAY. If the moter does not function then replace the motor
Good Luck
You can get a new window motor on ebay or at your local junk yard or (god forbid) the dealership

Jul 20, 2008 | 2000 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...