Question about 2005 Ford Crown Victoria

4 Answers

While driving , head light goes off, I stop my car, shut off engine, start again head light comes again, crown Victoria 2005 police inteceptor.

Posted by on

  • Anonymous Mar 15, 2014

    I noticed my lights started going deem while waiting on Red light and the vehicle shuts off all of sudden. A police officer

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

100% you have bad LCM. I rebuilt them with lifetime warranty. Email to ginolena@sbcglobal.net.

Posted on Jul 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I rebuilt them with lifetime warranty. Please email me @ cars110@yahoo.com or call me @ 510-414-1929 Ross. Fast turn around time. Thank you

Posted on Mar 16, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

I also second that lcm (lighting control module) problem. I had the same problem in my 2003. I also got it rebuilt and it works fine. The relays go out in them. Its located in the drivers side under the dash. Its a black box with vents in it and tons of wires going to it. the oem replacement from ford is $417 but you can get them rebuilt for about $45.

Posted on Jul 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Have you looked at the fusers

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

?2005 Crown Victoria Police Interceptor starts


I would but imagine that since it goes into reverse, the shift lever is connected to the transmission. Makes sense. But won't go into forward gears with the selector/shift lever. Your either very low on trans fluid or you've burned the clutch packs out from being low on trans fluid. Only makes sense.

Sep 24, 2014 | 2005 Ford Crown Victoria

1 Answer

Ever thing works but my 2005 crown victoria won't start, what do i need to try


You didn't provide any sounds or anything
you may have checked so far

Did you test the battery?

Is the battery 6 years old,that you would know.

Are the cables corroded or loose?

Does the starter solenoid click,that could be bad
or the starter it's self

What about the head lights or any other power

What does work is my question
You need to come here with something
to work with

Aug 03, 2012 | 2005 Ford Crown Victoria

1 Answer

Water pump failed. Car overheated. Engine lost power. Car smoke out from back of engine and from rear of car. I replaced water pump. Car still smokes when I drive it. Still has no power.


Notorious for intake leaks, the composite plastic intakes crack and leak coolant-as to the lack of power, you mght have overheated it and done some damage to the engine. There was a recall (information below) for the 4.6 for the intake-the overheating and lack of power means you should at least have compression checked and go from there-you may have bad head gaskets or worse. Do a compression test before you do anything else.

Ford Motor Company will extend the recall (01M02) on 4.6L V8 equipped vehicles with plastic intake manifolds. Some of the composite intake manifolds used on 4.6L SOHC engines may develop fatigue cracks at the coolant crossover duct. This condition could result in engine coolant leakage which, if not serviced, may cause engine overheating. Complete loss of coolant may result in engine damage or engine failure.
The updated recall now includes:
• Certain 1996 through 2001 Model Year Crown Victoria Police Interceptor
• Certain 1998 through 2001 Model Year Crown Victoria with Taxi
• Certain 1998 through 2001 Lincoln Town Car Limousine and Livery Prep Package
• Certain 1996-2001 Crown Victoria Taxis, Police cars and Lincoln Town Car Limousine and Livery cars.
• Certain 1996 through 1997 Crown Victoria Police Interceptor Vehicles with 4.6L SOHC engines built at the St. Thomas Assembly Plant from the beginning of production for the 1996 Model Year through January 28, 1997.
• Certain 1998 through 2001 Crown Victoria Police Interceptor Vehicles with 4.6L SOHC engines built at the St. Thomas Assembly Plant from November 22, 1997 through December 15, 2000.
• Certain 1998 through 2001 Crown Victoria Taxi Vehicles with 4.6L SOHC engines built at the St. Thomas Assembly Plant from November 22, 1997 through December 15, 2000.
• Certain 1998 through 2001 Lincoln Town Car Limousine Prep Package and Livery Vehicles with 4.6L SOHC engines built at the Wixom Assembly Plant from November 22, 1997 through December 15, 2000.

Sep 23, 2011 | 2001 Ford Crown Victoria

1 Answer

2004 Ford Crown Victoria, how many labor hours for?


Depends on whether or not you are going with Brand new or are Going to Machine the Old ones. Which way you goin????

Jan 25, 2009 | 2004 Ford Crown Victoria

1 Answer

2005 Crown Vic Police Interceptor: Starts then stalls


Have you checked the fuel filter. Fuel pump will pressure up, but fuel filter could be clogged and not work without the pressure of the fuel pump.

Nov 27, 2008 | 2005 Ford Crown Victoria

1 Answer

2005 crown victoria airbag light


First you should check the plug in connections under both seats if they are pluged in then check crash sensor on front bumper behind grill good luck

Oct 16, 2008 | 2005 Ford Crown Victoria

Not finding what you are looking for?
2005 Ford Crown Victoria Logo

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...