Question about 2001 Jaguar S-Type

1 Answer

Lneed to remove drivers side door panel

My window has shattered on the drivers door and I need to remove the door panel to remove broken glass and replace window,I dont know how to remove the panel

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace broken door glass on the rear driver side door for 1997 Lincoln towncar


strip out the door interier panel and remove the window actuator to remove broken window fitting refitting is the reverse

Oct 07, 2014 | 1997 Lincoln Town Car

1 Answer

Window on 2001 toyota solara "fell" down. What's wrong?


A few possibilities, either the window regulator has broken, or the bracket that holds the glass at the bottom has come loose from the glass. The bracket can pull off the glass, especially with power windows when you're trying to lower the window and it is stuck from freezing or old glass runs that are trapping the window from moving.

re-installing the bracket to the glass is often tricky, and it is easy to shatter the glass. Often best left for a car repair shop or an automotive glass shop to repair.

You will need to remove the door panel to inspect for what the issue is, and then repair it accordingly.

Jan 16, 2014 | 2000 Toyota Camry Solara

1 Answer

The drivers side window is off the track and now im having problems getting it closed


you can sometimes get it back in by lowering the window all the way down, pry or hold open the felt seals on the door, and look into the door with a flashlight, you might be able to get it back in track by moving the window back and forth (be carefull not to strain glass or it will shatter).. may have to remove door panel to put glass back on track.

Dec 15, 2013 | 2003 Chevrolet Malibu

1 Answer

1996 cadillac deville how to replace passenger front door glass


remove interior door panel inside you will see where it mounts to should be two to three bolts and possible a clip that holds it in place remove old glass and install new glass from top of door remount into window gear mechanisim

May 20, 2013 | Cars & Trucks

2 Answers

How do I replace the drivers side window on a 1999 mercury sable?


remove the inner door panel, unhook the window glass from the regulator that lowers and raises the window,, lift it up by hand and glide the window outside the door, towards the outside of the car, it fits easier that direction and leaves more room for play,, install it the same way , from the outside in,, in removing the glass, some have a hole with a vinyl bolt holding them on, and others have a double sided tape, the bolts are easy , the tape is a little tougher,, us a thin putty knife or blade to remove it

Jul 10, 2011 | 1999 Mercury Sable

1 Answer

My drivers side rear window is off the track and i believe the cable is broken because i cant re-latch it to where it goes. how do i fix this?


WINDOW GLASS REGULATOR BROKEN OR GLASS TO CHANNEL NUTS LOOSE AND MISSING.YOU HAVE TO REMOVE DOOR PANEL FIX WINDOW GLASS.

May 31, 2011 | 1999 Oldsmobile Alero

1 Answer

How do i replace a broken front passenger side window thats shattered.


you will need to pull the panel off, look for screws in the door handle and arm rest, may be some on the outer part of the panel and then the rest is snapped in, just take a flat tip and go around the outside of the panel. Panel is off, then it is just a matter of getting all the glass vacuumed out. It may be easier and cheaper to have a glass place do it for you. Hope this helped Tim

Oct 16, 2010 | 2004 Kia Optima

1 Answer

I own a 2000 ford f-250 my driver side window was shattered so i took it into a mechanic and he replaced the window i havent used the truck much in the last 18 months because of other problems but i just...


Parts stores sell door panel removal tools. Just watch for hidden screws in the door panel. The passenger side motor is replaceable, just involves removing the door panel and removing the power motor. The regulator may need lubricated, I'd do the drivers side after you get the glass out.

Mar 06, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

I shattered my driver side window. I went to salvage yard to get another one, but I could not see any way to get the window out. Can this be done r do I have to get a whole new door?


yes remove door panel there is a bar at bottom of window whick connects to regulator most have 2 bolts on each end to remove, if no bolts then need to remove regulator and then slide glass out of

Feb 05, 2010 | 1993 Ford Aerostar Extended

1 Answer

REPLACIND DRIVER SIDE WINDOW REGULATOR


Pull out window crank and door handle, remove panel, remove plastic Nylon that's between metal and panel, crank the window down enough to see the arm and the part that connects with glass. Make sure the metal part inside the door that comes from an arm and attaches to glass is clean, from broken glass and the gap that attaches to window is clean,bend the new glass to make it fit inside the opening slide down the new glass from the top using opening guides, grave it from both sides standing in between and make land on top center of the part that graves the glass, put automotive glass silicone on center of that part,just at where graves the glass, let dry, put the plastic back the door panel the window crank with the "U" shaped lock washer and the door handle, I hope I was clear

Jan 21, 2009 | 2004 Chevrolet Silverado 2500HD

Not finding what you are looking for?
2001 Jaguar S-Type Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...