The current remote is not operating the doors so it does no disable the alarm so when I start the car the alarm goes off even though I can move the car
SOURCE: 2002 Jeep Liberty Limited 3.7 V6 Auto with 4wd- Factory alarm system malfunction
all alarms have disable function usually located down underneath the driver side, look for a small toggle switch or momentary switch, turn the key to the on position , click the switch once or twice to the small red l.e.d light stays on constant.
SOURCE: Imobilising car alarm on Hyundai Getz
it may be worth while changing the battery in the remote as it takes more power to send the frequency to disarm than to illuminate the l.e.d.
SOURCE: Dash reads start disabled;due to theft sysytems;wait three minut
did you replace the fuse.if so try to get the alarm reset location,it could be in the stupidist place like my pathfinder you have to put the key in the tailgate and turn it to glass side and hold it for 20 seconds.and then hit the hidden reset switch under the rear carpet.
SOURCE: lost keyless entry remote
turn door lock left twice to un do alarm ,on old cars it may or may not work due to old age
SOURCE: 1996 Explorer anti-theft system won't disable
Try re-setting the computer...Disconnect the negative terminal of the battery and leave off for 5-10 minutes. This will allow the computer to reset. The charger may have interupted the signal or something.
78 views
Usually answered in minutes!
Hi Norman Richard Voisine
Need make, model and year. Is this a factory system.
×