Question about 2002 Hyundai XG350

1 Answer

HOW TO CHANGE A/C COMP. BELT ON HYUNDAI XG 350

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Loosen tentioner pully belt... using a 14 mm wrench, release tension on the belt by loosening the 14mm bolt. when loose enough, remove belt.. then install NEW belt.. adjust tension on new belt then tighten 14mm bolt on tensioner pully... you're done.

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Locate the starter


The starter motor will engage the gear in the transmission bell housing to rotate the engine, so it will be mounted on the side of the transmission. The illustration shows the XG-300 and XG-350.


10_1_2011_2_37_23_am.jpg

Sep 30, 2011 | 2004 Hyundai Elantra

1 Answer

How to change the blower motor transistor on 2004 XG 350 and whats the part number for it?


You go to the dealers parts counter & get it

How would someone know a part # for anything?

Jul 30, 2011 | 2004 Hyundai XG350

1 Answer

How can I change spark plugs for hyundai XG 350?


Its not very hard to replace spark plugs on your Honda xg350.But there is a perfect procedure, that you will have to follow, to replace the spark plugs.Click this link below and follow the procedure:--- http://technoanswers.blogspot.com/2011/07/how-to-replace-spark-plugs-for-hyundai.html --------- This should help.Thanks.Helpmech.

Jul 03, 2011 | 2004 Hyundai XG350

1 Answer

Yes i took my hyundai xg 350 L to a hyundai dealer to get my timing belt changed and a transmission flush amd new spark plugs and wires and spent over twelve hundred dollars and my car is running worse...


Having once owned a trans repair business,I wouldn't
flush a trans,as you may get fine sediment in the valve
body and solenoids

I suspect they installed your timing belt incorrectly
or some othe issue

You should have a new water pump also
No one does a timing belt and not the water pump

Mar 21, 2011 | Hyundai XG350 Cars & Trucks

1 Answer

I need to know how to replace a water pump on a 2002 hyundai gx 350.


2002 Hyundai XG350 3.5L MFI DOHC 6cylWater Pump - Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    Negative battery cable Accessory drive belts Water pump pulley Timing belt, tensioner and idler pulley Water pump

  4. 1514f36.jpg

    Fig. Water pump assembly-XG 300 and XG 350 (click over pic for zoom)

To install:
  1. Clean all mating surfaces of any residual gasket material.
  2. Install or connect the following:
    Water pump with a new gasket and torque the bolts to 16 ft. lbs. (22 Nm) Tensioner and timing belt and idler pulley Water pump pulley and drive belts Negative battery cable
  3. Fill the cooling system to the proper level.
  4. Start the vehicle, check for leaks and repair if necessary.
To install:
  1. Clean all mating surfaces of any residual gasket material.
  2. Install or connect the following:
    Water pump with a new gasket and torque the bolts to 16 ft. lbs. (22 Nm) Tensioner and timing belt and idler pulley Water pump pulley and drive belts Negative battery cable
  3. Fill the cooling system to the proper level.
  4. Start the vehicle, check for leaks and repair if necessary.

95486b3.jpg


Fig. Water pump bolt lengths-3.5L engine

Install the water pump with new gaskets and O-rings. Tighten the bolts to the following specifications:
  1. 1.5L SOHC engine: 105-132 inch lbs. (12-15 Nm).
  2. 1.5L DOHC engine: 14-20 ft. lbs. (20-27 Nm).
  3. 1.6L DOHC engine: 14-20 ft. lbs. (20-27 Nm).
  4. 1.8L, 2.0L, and 2.4L engines: 14-20 ft. lbs. (20-27 Nm).
  5. 2.5L engine: 11-16 ft. lbs. (15-22 Nm).

Hope helps (remember rated this).

Jun 18, 2010 | 2002 Hyundai XG350

1 Answer

I replaced my timing belt at 60k, my car now has


I assume that you replaced the belt at 60,000 because that was the recommendation in the owner's manual. It needs to be done every 60,000 to keep the engine running fine so you should be giving serious thought to getting it done soon. Hope this helps.

Apr 17, 2010 | 2004 Hyundai XG350

1 Answer

Should the timing belt be changed as preventative maintenance?


Yes, definately, 60,000 is the recommended replacement miles. Cost? Around 200 to 250.00

Oct 26, 2009 | 2002 Hyundai XG350

3 Answers

How do I remove the alternator from a 2002 V6 Hyundai Sonata once I have disconnected the alternator?


Removal
  1. Remove or disconnect the following:

    Negative battery cable Radiator mounting bolts, 1.6L only Alternator drive belt Alternator wiring harness connectors Alternator. It may be necessary to raise the radiator

0f18cd4.gif


Fig. Exploded view of the alternator-XG 300 and XG 350


Removal & Installation
  1. Remove or disconnect the following:
    Negative battery cable Alternator drive belt Alternator wiring harness connectors Alternator. It may be necessary to raise the radiator 5ead6d5.gif


  2. Fig. Exploded view of the alternator-XG 300 and XG 350

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:

    Negative battery cable Radiator mounting bolts, 1.6L only Alternator drive belt Alternator wiring harness connectors Alternator. It may be necessary to raise the radiator

    27b2f58.gif

    Fig. Exploded view of the alternator-XG 300


    0900c15280196f8f.jpg
    Fig. Exploded view of the alternator-XG 350

  3. Install or connect the following:

    Alternator and reposition the radiator, if raised Alternator wiring harness connectors Alternator drive belt
  4. Adjust the alternator belt and torque the bolts to the following specifications:
    1. Accent: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment bolt to 14-20 ft. lbs. (19-28 Nm).
    2. 2.0L and 2.5L Sonata, Elantra and Tiburon: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment bolt to 105-132 inch lbs. (12-15 Nm).
    3. 2.4L Sonata: Pivot bolt to 26-41 ft. lbs. (34-54 Nm) and the adjustment bolt to 14-18 ft. lbs. (19-25 Nm).
    4. 3.0L Sonata and XG 300: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment bolt to 11-16 ft. lbs. (15-22 Nm).
  5. Install the radiator mounting bolts, if removed.
  6. Connect the negative battery cable.


I hope hrlp you with this. Good luck and remember rated this help-


Aug 25, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

Timing Belt Replacement Procedure


GO the dealer hyundai because is dificult engine is mitsubishi

May 08, 2009 | 2001 Hyundai XG300

Not finding what you are looking for?
2002 Hyundai XG350 Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...