Question about 1984 Cadillac Eldorado

2 Answers

Had some body work done. Only electrical was side

Had some body work done. Only electrical was side marker lights and power antenna. Now I have no headlights, turn signals or wipers. Checked the fuses - seemed OK. Any thoughts?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

I would go back to the repair shop and let them find it.

Posted on Jul 28, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 297 Answers

A wire is cut check near all body work you may find it.

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing backup bulbs on 2005 buick rendevous


TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT

REMOVAL PROCEDURE

1. Open the liftgate.
2. Remove the screws from the tail amp.
3. Slide the tail lamp rearward in order to disengage it from the retainers on the rear body panel.
4. Disconnect the electrical connector from the tail lamp wiring harness.
5. Remove the tail lamp and side marker lamp sockets from the tail lamp, depressing the locking tab and turning counterclockwise.
6. Remove the bulbs from the tail lamp and the side marker lamp sockets, if replacing the bulbs.

INSTALLATION PROCEDURE

1. Install the bulbs to the tail lamp and side marker lamp sockets, if removed.
2. Install the tail lamp and side marker lamp sockets to the tail lamp, turning clockwise until the locking tab is fully seated.
3. Connect the tail lamp electrical connector to the wiring harness.
4. Position the tail lamp retainer slots to the tabs on the rear body panel.
5. Install the tail lamp to the rear body panel, pressing into place until fully seated.
6. Install the tail lamp screws to the Taillamp.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the tail lamp screws to 2 N.m (18 lb in).

7. Close the liftgate.

Apr 16, 2017 | Buick Cars & Trucks

1 Answer

04 Nissan maxima tail lghts don't always come on right away thought maybe headlight switch not sure need help


Download 2004 Nissan Maxima Lighting System Section LT PDF Manual 190 Pages Do you know how to do electrical testing with volt ohm meter ? Do you know what a BCM is ? COMPUTER !
Control of the parking, license plate, and tail lamp operation is dependent upon the position of the lighting switch (combination switch). When the lighting switch is placed in the 1ST position, the BCM (body control module) receives input signal requesting the parking, license plate, side marker and tail lamps to illuminate. This input signal is communicated to the IPDM E/R (intelligent power distribution module engine room) across the CAN communication lines. The CPU (central processing unit) of the IPDM E/R controls the tail lamp relay coil. This relay, when energized, directs power to the parking, license plate, rear side marker and tail lamps, which then illuminate.
Testing starts at 134

Feb 05, 2017 | 2004 Nissan Maxima

1 Answer

Hello i have a toyota camry 1992 and my passenger side marker wont turn off ???


That's very odd, because the wiring for all of the side markers are just splices from the nearest park lamp wires- the rear tail light in the rear (and the license plate lamps are also splices from these tail lights), and in the front side markers, they are splices from the nearest park lamps. Do all the other park lights work and turn on with the park light switch on? I would examine the 2 wires from that side marker's socket to the wiring harness it goes into-the power wire would somewhere splice into the passenger tail light wire. The other wire would be a ground wire and also splices into a ground wire for the rear end. To be on, the marker lamp would have to be getting power from some live source. I can't imagine where. Does the rear passenger light work correctly?

In that harness to the rear where the park lamps run, there might be a live wire going to an electrical trunk latch switch, or maybe a trunk lamp. If the wires were frayed right beside the side marker wire, you could have some cross feeding of power between the two. Let me know, we always appreciate feedback.

Sep 06, 2015 | Toyota Cars & Trucks

1 Answer

2004 Dodge Caravan Electrical Failure


The body control module seems to be the culprit here. Have it tested or replaced.

Mar 28, 2017 | 2004 Dodge Caravan

2 Answers

Fuse box location for 1997 chevrolet lumina that controls signal switch on steering colum


If its like my 1999 Lumina, its on the end of the dash on passenger side. Open pass. side front door, look at the end of the dash & you should see a little door that says "FUSES" on it. Grab the tab at the bottom of the little door & pull out. And Ta da, there they are!

Aug 31, 2010 | 1997 Chevrolet Lumina

1 Answer

My dash lights dont work after removing the power


check for a disconnected ground or pos wire

May 17, 2010 | 1989 Jeep Cherokee

2 Answers

How to change the little front lights beside the main front light


Side Marker Lights
  1. If visible, remove the attaching screws and partially remove the front side marker light lens.
Fig. 7: To change a side marker bulb with no attaching screw, protect the body with a rag and gently pry the lens assembly outward . . .





Fig. 8: . . . until the entire assembly is free of the body and access to the bulb socket is achieved


2d8805f.jpgde76af4.jpg

Aug 30, 2009 | 1994 Mazda 323

1 Answer

Had a problem with a right, amber side marker on right side


Usually one of the holes in the marker light where screw goes in, has metal contact where screw meets light, but if not, and they are not push in wire connection type from behind, then just run your white wire up through hole in housing, and bare the end & tighten it up under screw holding light to body. White should be ground, brown should be power.

Jul 02, 2009 | 2004 Dodge Ram 2500

1 Answer

Right side of trailer running lights does not work


Usually one of the holes in the marker light where screw goes in, has metal contact where screw meets light, but if not, and they are not push in wire connection type from behind, then just run your white wire up through hole in housing, and bare the end & tighten it up under screw holding light to body. White should be ground, brown should be power.

Jul 02, 2009 | 2004 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...