SOURCE: how to get to rear seat driver's side fuse box?
Open the rear doors Follow the carpet to the bottom of the rear seats. You will see staples along the carpet. (This is to adhere Velcro to the carpet.) Separate at that seam. Reach in and pull the carpet forward. The Fuse boxes are long narrow black boxes. (its tight and you have to use some force to pull the carpet back. Fuse boxes are located on both the driver side and passenger side. Good luck!
SOURCE: 2005 Mercury Mountaineer rear end whine, how hard to fix
Before you do this you might want to try fresh gear lube. On Ford products they use a synthetic additive in the rear and not in the front 4x4 axle.
The next thing would be to determine if it is a wheel bearing or a pinion bearing. You have to pull the axles and eliminate them as the problem. You might get lucky and not need to do the pinion.
The technical part of shimming the pinion gears with replacing the pinion bearing is about the worst part of the job. You won't know about the gears until you see them. You will need extra shims on hand.
It is a moderate job for two people. If you have all the parts it can be done in a day.
Testimonial: "Thank you for your advice"
SOURCE: reset piston on rear disc brakes 2008 Grand Caravan
they should screw in not compress
Testimonial: "Thanks--very helpful---fast response!"
SOURCE: The rear left passenger door window power lift
the power window on 2000 chev suburban is stuck down. i removed the door pannel and the motor works but it appears the wiring on the pulley is not right any info how to remove.or repair that system?
SOURCE: the glass lift gate on my 2008 Ford Escape keeps
you either have a weak latching device or a misaligned striker that strikes the latch which will catch it and keeps it closed securely
291 views
Usually answered in minutes!
×