Question about 1999 Dodge Intrepid

1 Answer

I have a 99 intrepid, the blower motor works when it wants to. when working works great, ive pulled the motor out and hooked to power, works great. could it be one of the switches?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

Replace the fan resistor under the dash most likely in the area of the glove box underneath, it is screwed into the side of the heater box

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The heat in my 2003 chevy tahoe doesnt work. The motor wont spin. I've checkd fuses & the wire from the resistor to the blower motor. All have power. Ive hook a neg/pos charge to the motor & it spins.


It has an internal card fuse which sits in the bottom of the blower unit.these get condensation and rust so the contact strips corrode over time.you remove by unscrewing one Philips screw and pull the fuse card out...inspect.i fixed mine by solder wire bridge across the breaks but if you can source from breakers or eBay all well and good.

Apr 01, 2015 | 2003 Chevrolet Tahoe

1 Answer

My 99 dodge intrepid heater control stays blowing and wont light up and wont stop blowing unless i pull the fuse and nonew of the controls work


Are the different speeds working on the blower or is this stuck on just one speed ??? It seem as if the relay for the blower is fused together in the on position an can no longer be controlled by the switch. If this blower is not a relay controlled unit then most likely the blower switch is no longer working.

Aug 24, 2012 | 1999 Dodge Intrepid

1 Answer

Fan blower only works on high on 99 intrepid how do i fix it?


Need to replace the blower motor resistor.
More info, let me know.

Charlie

Feb 06, 2011 | 1999 Dodge Intrepid

1 Answer

Temp control on 99 dodge intrepid not working


try a new compressor or take it into the dealer

Jul 27, 2009 | 1999 Dodge Intrepid

1 Answer

99 Yukon - Blower Motor Not Working


replace the A/C control head... very simple to do. Pop off the dash panel and pull the control head out... unplug the 3 harnesses and there you go.

Jun 02, 2009 | 1999 GMC Suburban

1 Answer

99 intrepid electrical problems


i have seen an ignition switch cause exact same problems you are having on 1 of these vehicles..needs to be replaced

May 14, 2009 | 1999 Dodge Intrepid

2 Answers

2.7 99 dodge intrepid skips when warm


solid lifters? i could be wrong but i think they are hydraulic lifters. ive had quite a few of them not pump up when re-installing the valvetrain and cause a tick. pull off the valvetrain and check to see if all the lifters/tappets are firm with no squish. that might be your problem

May 06, 2009 | 1999 Dodge Intrepid

1 Answer

99 intrepid gas pump


Pull the mat back on the upper part of your trunk, there's a little plate with screws in it take it off, you will see the top of the fuel pump unplug it and take the lines off pull the fuel pump up. install the new one. hook up the lines and wiring your done. always be careful when working on fuel related parts

Phil

Jan 04, 2009 | 1999 Dodge Intrepid

1 Answer

Heater / Air only work when blower is on set on high


You need to replace the blower speed control module, it is behind the glove box near the b;lower motor.

Oct 26, 2008 | 2001 Dodge Intrepid

Not finding what you are looking for?
1999 Dodge Intrepid Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...