Question about 2003 Chevrolet Venture Passanger

1 Answer

I have a 2004 chevy venture. The power locks do

I have a 2004 chevy venture. The power locks do not work. I can unlock it, but not lock it. Any ideas what the problem is and how much it will cost to fix? My friend's dad owns a body shop. He replaced the computer, but that didn't fix the problem.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

Open the door and look on the side of door for little switch up and down ,it a safety switch ,little gray lever sticking out on the side of doors, move it up or down ,read decal on the door jam,hope to help robert b.

Posted on Jul 17, 2009

  • rielburrows Apr 24, 2011

    on the passenger side there is a wire harness under the carpet. there is a kick plate that pulls off. pull it off and pull back the carpet it is most likly soaked. mine was (welcome to winters) take the tape off the harness you will find a 2 white together and come out as a single wire and it will be taped. This is the unlock wires for the power locks if unlock is woking leave it alone. there is also 2 blue wires that are the same as the white wires in the same harness these are the wires that control the locking. take the tape off and if the wires are all coroded off strip the wire and slid some sealant shrink wrap over one of the wires solder the wires together and shrink wrap the wires then retape the harness and put everything away .. just finished this about an hour ago .. ton of fun to find the solution

  • travisknight
    travisknight Aug 03, 2012

    Just looked ans sure enough the white wires were corroded. Put a new splice in and the locks work like new. Thanks.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both Power Locks Lock But Wont Unlock. Remote will unlock the doors


If the remote key fob locks and unlocks the doors then the problem is more than likely the power lock switches, this is a common problem on the Venture Van.

Mar 02, 2013 | 2001 Chevrolet Venture

1 Answer

Have a 2004 Chevy Venture van with faulty power door locks. They will lock with the switch but will not unlock with the switch. Need schematics of the power door lock system. Thanks.


I don't have a solution, but a related problem. Our 2004 Chevy Venture power door locks are cycling (locking/unlocking) on their own while we are driving. This coincides with our remote keyless entry losing its effectiveness. I tried replacing the battery on the remote, but to no avail.

Mar 28, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

2004 Chevy Venture Passenger side sliding door stopped opening with button, can still open and close manually, at same time backup lights do not work and power door locks do not automatically lock and...


It sounds like you've got a broken wire on the drivers side door. Usually this occurs at the flex point of the wiring harness. Peel back the outer covering carefully exposing the wires inside. Repair any broken or those about to break. Solder & retape or shrink rap with heat gun.Hope this helps. Good luck!

Nov 24, 2009 | 2004 Chevrolet Venture Passanger

1 Answer

Power door lock on the chevy venture 2000 don't


check the system fuse and or circuit breaker. check the switch wires for damage and loose connections. check the switches for continuity. remove the door panel(s) and check the actuator wiring connections to see if they're loose or damaged. inspect the actuator rods if equipped to make sure they arn't bent or damaged or loose connections. the actuator can ce momentarily. a discernible click indicates that the solenoid is operating properly.

Nov 17, 2009 | 2000 Chevrolet Venture

1 Answer

04 Chevy Malibu won't unlock


Remote control door lock reciver an the BCM - body control module control the locks . The key switch is a electrical input to the BCM , the BCM controls the door lock actuators . Your best bet ,have it towed to the dealer .

Jun 18, 2017 | 2004 Chevrolet Malibu

1 Answer

Electric door locks 2004 Chevy Venture


there is a group of wires under the passenger side carpet you will find 2 wires 1 blue and 1 white the make a splice there the splice will be broken just reconnect the wires and you should be good to go

Jun 11, 2009 | 2004 Chevrolet Venture Passanger

Not finding what you are looking for?
2003 Chevrolet Venture Passanger Logo

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...