Question about 1988 Mazda B2200

1 Answer

My 90 b2200 has been parked for a while...i had it aligned 5k mi ago before driving it cross country...not it pulls to the right rather hard, and when start to move it seems like the brake is still on..i can smell the hot break pad...the ball front end suspension stuff is original (205k)...what specific pulls...looking for the cheepest fix before doing the whole kit...putmin, bearings, arms,ect...

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 634 Answers

Sounds like you have a frozen brake caliper, lift right wheel off ground and remove tire, try to spin disk if you cannot then u need to remove caliper try using a c-clamp and compress inner pad and see if piston will move inward if yes check for leak and clean retry and if still doesn't work or cannot move piston in replace caliper. It most likely has rusted and seized from long term sitting.

Posted on Jul 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Moderate scraping noise coming from my right front tire

a shimmy condition indicates it needs a wheel alignment
best take it to an accredited front end specialist shop for a proper diagnosis of the problem

Jun 22, 2017 | Cars & Trucks

1 Answer

Pulls to left while hard acceleration pulls to the right after shift and rpm's drop off

Probly done wrong. Get it realined or havit inspected at a specialist not a dealer. Also send issue to

Sep 05, 2016 | 2006 Chrysler Town & Country

1 Answer

Mazda b2200 when i hit breaks the engine shuts off

my wild guess, you are driving car? not parked
eg: im driving along, i see a stop sign and slow and as i slow to
a stop , the engine stalls? bingo:?
but, i can save the stall with a fast right foot.
real easy save?, hard save? or IMPOSSIBLE?

if easy save tad hard, the EGR valve just stuck open,
clean the EGR main valve.
if impossible , say so.

super easy save might be , stuck ISC. (idle speed contoller) same
fix, clean it. in fact at 50k we clean both, per the service schedules.
all cars .

Jan 24, 2014 | 1994 Toyota Corolla

1 Answer

2005 chrysler town and country when i start the van it shaking vibration hard in park and in reverse it and in neutral and in drive

its misfiring check the plug wires for cross wireing the do a comprission test and a fuel pressure test

Nov 23, 2013 | Cars & Trucks

1 Answer

2003 mitsubishi outlander death wobble

While what i understand your Mitsubishi outlander, 2003 AWD having problem with wheel alignment Or a wheel barring problem kind of . and if you SUB wobbles from behind it might be problem from driving shaft or shaft crosses. its better to visit a proper mechanic to solve this problem other wise you ll facing bigger problems from this ....
bettter take care & have a save drive ...

Nov 21, 2013 | Mitsubishi Cars & Trucks

1 Answer

My 1999 mercedes ml 320 was hit very hard while backed into a parking stall, body damage was repaired but it still has other damages, it has a lift kit and it now starts veering too much to the right

I think the rear axle is out of alignment a simple thrust angle alignment should cure the problem . provided the wheels and tires are not out of round and the front angle alignment is correct another possibility is radial tire pull and may not be related at all if you swap the front tires and the pull switches side you know you have a slipped cord inside the tire and they cannot be seen usually but will drive an alignment tech batty

Dec 05, 2012 | Cars & Trucks

1 Answer

Need new tires for 2006 Toyota Highlander

The duelers work pretty good for me. But if I had the money Michelins are the best.

Apr 22, 2009 | Toyota Highlander Cars & Trucks

2 Answers

03 prius rack and pinion

Sound like PS is standing for power steering.try checking your power steering unit for fluid to see if it is low and if it is check for leaks.Garages are out to make money not save you any! LoL

Sep 23, 2008 | 2003 Toyota Prius

Not finding what you are looking for?
Cars & Trucks Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides