Question about 2007 Fiat X1/9

Open Question

Instrument panel gauges not working(temp,speedo,tach,fuel)

Vehicle stalled then instrument panel gauges stopped working(temp.speedo.tach.fuel).Tried looking at problem and moved a plug at back of panel and all worked ok,drove vehicle a short distance and same fault re-appeared.The panel indicated that the temp was hot, fuel was low not true and automatic gearbox oil level low manual box vehicle. Suspected circuit board problem any ideas please ? The vehicle is a FIAT DUCATO 2-8 JTD 2003

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

landsend
  • 1066 Answers

SOURCE: fiat ducato timingbelt problem

on the front engine pulley/harmonic balancer or in a hole on the bellhousing. 

Posted on Mar 11, 2009

  • 2 Answers

SOURCE: got fiat ducato 2.8 jtd dipped headlights

u got a faulty wire somewhere probaly and if i were u id get rid of it and buy a american made car.

Posted on Apr 07, 2010

  • 45 Answers

SOURCE: Where exactly can I find the filler for my Fiat

under the car onthe side of gear box

Posted on Sep 07, 2010

  • 978 Answers

SOURCE: fiat ducato van 2litre jtd turns over but wont

strange that it should start with a jump ,i would be looking at the battery to make sure not a dead cell in it

Posted on Oct 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a fuse for the tachometer?


Most vehicles power the tach from the same circuit as the other instruments. So if the speedo and fuel gauge work the tach probably has power. May not have a ground signal from the engine computer.

Nov 19, 2015 | Cars & Trucks

1 Answer

2003 Satria, Tacho and Fuel gauge dont work . Fuel gauge comes up now & again low fuel light works. Tacho works now & again. But speedo and temp do work all the time.


It may be that the speedo and temp are mechanical, whereas the tach and fuel are electrical. Check fuse for inst. cluster for clean and tight fitment. Check electrical connection at back of inst. cluster.

Dec 09, 2014 | Cars & Trucks

1 Answer

Instruments don't work, key stuck in ignition, doesn't shift correctly


Sounds like you need a new car.
With joking aside, the problem with your speedo, tach, gas guage, temp gauge and odometer can probably be one of two things. Check your fuses. If they are fine you may need to replace your cluster panel. I had to have the entire thing changed over my speedo not working right. It was not cheap. You might want to check the relay box under the hood. Does your transmission leak? Check the fuses and relay on it also. Get a new ignition switch and replace the old one if your key is stuck. You can try WD40 on that key but don't expect any miracles. The bearings are likely shot. Sorry I posted all of this bad news. Good luck.

Jan 05, 2014 | 1998 GMC Jimmy

1 Answer

Gauge arms 2003 tahoe not working


if its not a fuse then it could be the entire instrument panel-2003 is bad for that

Apr 01, 2013 | 2003 Chevrolet Tahoe

1 Answer

E46 instrument cluster not working


jjshock how did you fix this problem

Oct 17, 2012 | 2001 BMW 318i

1 Answer

Tach & speedo not working


Had same problem with my 2000 dodge stratus 2.4 liter and transmission would not shift out of 1st gear. Solution was ignition fuse under the hood was blown, one side of fuse working, replaced 10 am fuse everything works, tach, speedometer, gas gauge and transmission started back to shifting.

May 27, 2010 | 1996 Oldsmobile Achieva

1 Answer

1999 996 carrera speedo and tach does not work(analog and digital


maybe the speedo drive has stripped some teeth. good luck!

Jul 27, 2009 | Porsche 911 Cars & Trucks

1 Answer

Gauges not working properly


Hello, Last year General Motors lost a lawsuit about the instrument panels in 2002 to 2005 trucks. The following website contains all the information about this lawsuit settlement.
http://www.speedometersettlement.com/
This impacts the entire gauge cluster in your vehicle.
I have the same year and model as yours and my speedo is never accurate and the tach always read 6000.
The issue is the metal bearings that the gauge meter movements use. The bearings are getting dry which impedes the meter movement.

Apr 01, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

Gauges gone crazy


Could need new instrument panel cluster but check for corrosion as the instrument panel connector

Aug 11, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

913 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...