Question about 2000 Subaru Forester

1 Answer

How do i remove front grill to get at head light glass

Posted by on

  • Anonymous Mar 14, 2014

    I don't see any clips on my grill, only moldings. Can't figure out how to remove it

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 119 Answers

There are 5 clips holding it on 3 along the top 1 on each side,the middle part of each clip needs to be depressed to release,i'm not sure if this model has the trim pieces under the headlamps.if equipped you must push these pieces from the grille opening to the outside of car to release them good luck

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevrolet tracker front bumper removal


the front grille is held on by two bolts on top and the rest are pull tabs holding it on. I would use a flat head screw driver and pop the center one out first then the two on each side under the head lights

Feb 16, 2013 | 2002 Chevrolet Tracker

1 Answer

Changing head light on 2005 trailblazer


remove the front grill then the indicator light if seperate ,some cars you have to remove the front bumper as well ,sorry never done this model so i honestly couldnt say correctly but ? its will not be as simple as prising something back thats for sure

Jan 27, 2013 | 2005 Chevrolet TrailBlazer

2 Answers

Headlamp remove & replace


If it is just burnt out , you do not have to remove or replace the whole lamp , just the small bulb inside of it. They are usually easily accessable from inside the engine compartment , and just come out of the back of the headlight by 1/4 turn.

Jan 28, 2011 | 2004 Buick Rainier

1 Answer

How to remove 2008 nissan sentra headlight assembly


Remove radiator grille. 2. Remove screws on each side of bottom of fascia that attach fascia to bottom of fender protector. Partially
remove fender protector.
3. Remove engine underside covers.
4. Remove engine front undercover.
2. Ensure lighting switch is OFF.
3. Disconnect the negative battery cable.
4. Remove the combination lamp mounting bolts. (See Second Figure)
5. Pull the combination lamp up and toward the front of the vehicle,
disconnect connector and remove from vehicle. http://x.nissanhelp.com/forums/attachments/%20maxima/221d1175575385-maxima-head-light-removal-change-bulb-figure002.gif.att http://x.nissanhelp.com/forums/attachments/%20maxima/222d1175575385-maxima-head-light-removal-change-bulb-figure001.gif.att

Dec 01, 2010 | 2008 Nissan Sentra

1 Answer

How do you change front side bulb


HI, You might find that this is a sealed beam headlight, (so you will need a whole new light) or if you were referring to the indicator light, you will need to remove the light housing to get to the bulb.
1, pop the bonnet
2, remove the front Grill... [ should be about 4 screws, one in each corner [if rusty spray with CRC first],] you might find there is a small plastic square toggle/head, this needs turning to allow the grill to come out, also at the bottom there are plastic locators so pull grill from top out slightly and then up.
will help if you use the right tools so take your time to find the right screw driver that fits properly.
All the best Ian

Oct 26, 2010 | 1995 Toyota Camry

1 Answer

How to remove front grille


The first thing you do is get close to the grille an look there should be eather bolts in the center or the left side or right. The other ones are on the top or inbehind the head lights

Apr 10, 2010 | 2007 Toyota Camry

1 Answer

Removing Head lights


If this is a 1996 model. When you lift the hood you should see 3 or 4 screws in the top of the grill. Take these out then the grill should tilt forward. then pull up to release from the tabs on the bottom. The headlights have 3 or 4 nuts behind them under the hood. When you remove these the headlights and turn signal will pull out towards the front. You will have the disassemble them off the truck. You will have to remove the battery also.

Mar 13, 2009 | 1996 Ford F150 Regular Cab

2 Answers

Removing Headlight Assembly on 2003 Ford Focus Ultimate Edition


Jack up the front of the vehicle. Secure the vehicle with at least once JACK STAND. Open the hood of the car. Remove the front grill. Remove the fasteners on the head light assembly that are located on the exposed inner fender and the one that was under the front grill. Lay on your back and look between the front fender and the head light assembly. You only have about 4 inches. Remove that screw. All screws are either Phillips or torks.

Dec 24, 2008 | 2003 Ford Focus

Not finding what you are looking for?
2000 Subaru Forester Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...