Question about 2004 Volvo V70

1 Answer

I have that sometimes my left front light is out, but the 2 highbeams are turn on on 1/2 power, as if in serie. The lamp check is not on. If I turn the high beam on, they work but the check ligth will turn on.

Posted by on

  • erwin_merten Jul 16, 2009

    There is no ground wire. And if it is a ground wire problem how does the tension get from the one lamp to the other two in series, in two different headlamp units. I think it is related to the motor compartment heating up. It only happens when the motor is warm.
    I think it is a central control/relays unit problem.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 41 Answers

Did you check the ground wire to the headlight. Make sure it isn't broken or loose. You did say that this is an intermittent problem? Also you may want to check the connection in the light socket and make sure that it has a good clean connection.

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinkers, highbeams, autolights and other circuts


You have bad switch if it were a bcm you would lose all of your lights

May 17, 2014 | 2005 Chevrolet Colorado

1 Answer

2003 Jeep liberty right front turn signal


why skip RR lamp? what does IT DO? be like 1st 1st look.
dim, out, fast?

the rapid is talking to you
it means current is wrong,
shorted, or open lines. to the right.
its the wiring
if the bulbs are like 1157 brass base bulbs
why not replace them first , they can short inside,
asking online for guessing is silly, why listen to 10 examples for this.
but is cut wires.
shorted wires.
keep i mind the blinker asks funny for both opens and shorts
its a feature, that.
low current or too much.

the acid test is connect 2 TEST bulbs in parallel to the multi-function switch output right side,
blinks ok now, bingo bad lamps or bad wiring, from there to the right side.

if the hazard fails you never said????
if rigth front is dim or dead the bulb is blown or shorted
if new bulb there , then the wires are shorted.
to it.
the only help on line worth squat is how to test and use your meter.
you can, check for voltage
you can check continuity on that line (its just 1 wire)
and check for shorts on that wire to ground (lamps pulled right side to do that, lamps read 0 ohms cold)
look for collision damage RF? behind lamp sockets?
be first.
in my book.
looking is always first. sure.


I have your SM book open now, chapter 8w-50
the haz/blink module has just 2 pins, left and right out.
pin 3 on the module runs front and rear blinks, (a fact to know)
RF is BR/RD, brown -red stripe?
all comments USA on USA forum. USA car.
ok?

the right side lamp (sidemaker) only blinks turns if parks ARE oFF

Id try 2 new blinker lamps front and 1 rear.
that be first. or test the lamp on a battery , and no not get burned fingers hot wring a shorted lamp.

wish i knew
what rear did
and what both did on HAZ
out, dim or to fast.

Mar 23, 2017 | 2003 Jeep Liberty

1 Answer

Headlights won't turn on .Checked the fuses ,which are OK. Tried to see if the "highbeams" would come on. They don't. The highbeam indicator lamp does not come on in the dashboard. The turn signals,parking...


What you need to do is remove the head lamp switch and check for power on the red wire terminal c with a test light.You should have power.If you do then check the yellow wire terminal d and see if you have power when you turn the switch to low beams.The red is power coming in and the yellow is power going out.If you have power going in but not out when you turn the lights on then your switch is bad.replace it.If you don`t have power going in then you need to check for an open circuit in the red wire.Hope this helps.Let me know if you need more help.Good luck.

Sep 15, 2010 | 1996 GMC Sonoma

2 Answers

1992 lexus sc 400 headlights only work on highbeam flash position? could it be the switch


try checking the fuse first highbeam and dipped use different fuses.

Jul 29, 2010 | 1992 Lexus Sc 400

1 Answer

Need a fuse box diagram for a 1998 jetta


heres a diagram of the fuse box and i listed the fuses numbered 1-22,hope this helps.
1)low beam light left
2)low beam right
3)park lights.
4)reawiper/washer
5)front wiper
6)blower motor/ac
7)tail light right
8)tail light left
9)rear defogger
10)fog lights
11)high beam Left
12)highbeam rt
13)horn
14)backup lights
15engine electronics
16)sunroof/frt map/reading light
17)hazard lights
18)fuelpump /o2 sensors /control module
19)cooling fan, ac relay
20)brake lights
21)inside lights,clock,luggage light
22)lighter,radio, trunk release843f4eb.gif6f30923.gif

Mar 03, 2010 | 1998 Volkswagen Jetta

3 Answers

I need a fuse number and location or a fuse box diagram for the brake lights on a 2002 E350 super duty


go to the link bleow and follow it to the Ford web site, there you can download a free owners manual, all fuse box info u need is in the manual.

http://www.edmunds.com/ownership/howto/articles/120189/article.html

Sep 18, 2009 | 2002 Ford E350

1 Answer

Head lamp does not turn on, but bright light does in chrysler


It sounds like its a 'duel filiment' headlight; 2 separate filiments, 1 for highbeams & 1 for lowbeams. (Same as a brake light/directional bulb) Replace the headlight with a new one.

Mar 31, 2009 | 1989 Chrysler New Yorker

1 Answer

No front lights work


check the headlight relays under the hood also fuses under the hood and in the interior fuse pannel.

Nov 18, 2008 | 1996 Jeep Grand Cherokee

1 Answer

Problem to solve


Ok, The steering noise is either the power steering pump or belt! Check the fluid level first.
Sorry but the other questions will need a lot more info!
Had 2 Bighorns an would never buy another! But when there are no probs, these trucks are fantastic!! Frankster016

Oct 25, 2008 | 1996 Isuzu Trooper

Not finding what you are looking for?
2004 Volvo V70 Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...