SOURCE: need firing order on a 1996 dodge ram v8
The order should be stamped on your intake manifold right under the air cleaner.
My '97 1500, 5.2, 318 firing order is 1-8-4-3-6-5-7-2
Hope this helps
SOURCE: 1992 dodge 318 engine turns over, but no start. No
if truck has a ceramic ballist resistor near and connected to coil this could be problem or the crk posistion sensor could be too, i would change ballast first if you have on your truck appx cost $10
SOURCE: Firing order & diagram for distributor cap for
It is 1-8-4-3-6-5-7-2 with 1-3-5-7 on the drivers side front to back, 2-4-6-8 on the pass side and the dist turns clockwise.
I wish I still had my Chilton's manual, I would scan a picture for you.
If this helps, please rate me.
Thanks,
Matt
Testimonial: "Just the info I needed, THANKS VERY MUCH."
SOURCE: 1983 dodge power ram 150 custom pickup truck
On the drivers side bottom of the tranny, there should be embossed numbers on the tranny housing. I have a 1983 dodge ram also. It has a 318 with 727 trans.
41 views
Usually answered in minutes!
×