At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
/D OFF Indicator
The instrument cluster receives the O/D OFF indicator status from the PCM over the communication network. When the overdrive function is turned off, the PCM sends a command to the instrument cluster to turn on the O/D OFF indicator. When a powertrain concern exists, the O/D OFF indicator flashes amber and illuminates green when overdrive is selected off. What code ? you said solenoid A -
P0750
SSA
SSA Solenoid Circuit Failure
SSA circuit failed to provide voltage drop across solenoid. Circuit open or shorted or PCM driver failure during on-board diagnostic.
No reverse gear (short) or no 4th gear (open). MIL on.
Go To Pinpoint Test A .
P0751
SSA
SSA Functional Failure (Stuck Off)
Mechanical or hydraulic failure of the shift solenoid.
Not all gears present, MIL on.
Refer to Diagnosis By Symptom .
P0752
SSA
SSA Functional Failure (Stuck On)
Mechanical or hydraulic failure of the shift solenoid.
Not all gears present, MIL on.
Refer to Diagnosis By Symptom .
P0753
SSA
SSA Solenoid Circuit Failure
SSA circuit failed to provide voltage drop across solenoid. Circuit open or shorted or PCM driver failure during on-board diagnostic.
No reverse gear (short) or no 4th gear (open). MIL off.
Go To Pinpoint Test A .
Could be a wiring problem . Did you check the solenoid A wiring circuit back to the PCM ?
It is inside the the side pan of the transmission,ss1 ss2 ss3 are identical.SS1 is the top solenoid.You will need to remove the subframe to get the side pan off, and this is tricky.Good luck!
boy you must have more money than sense ,trade it quick for a nice ford focus diesel manual .here in spain once the gearbox goes on a auto we just junk the car as by the time the vehicle is 10 yrs old the value is less than the cost of a exchange gearbox .No auto box spares available here only exchange box
P0755 SS2/B solenoid control circuit is open SS2/B solenoid control circuit is shorted to ground SS2/B solenoid wiring harness connector is damaged SS2/B solenoid is damaged or has failed PCM has failed
×