Question about 2002 Land Rover Freelander

1 Answer

2002 landrover freelander cooling fan assembly

Can you replace the cooling fan assembly without removing bumper,radiator, and condenser coil? how about just finding the module that turns on fans? fans work when jumpered

Posted by on

  • Anonymous Mar 26, 2014

    engine overheat and fan is not working

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 44 Answers

The fan module is the big silver box with fins on it, right next to the fans. Just follow the fan cables and you will find it. Don't jumper the fans without unplugging or you may destroy the power transistors in the fan unit. Check the temperature sensor for the fan control unit - near the front of the engine - it should have some resistance - not be short circuit or open circuit, it is a sensor, not a switch. If short or open, that is likely to be the problem, otherwise, ensure that the control units have electrical supply, otherwise, it is very likely to be the control unit.

Posted on Aug 03, 2009

  • Samuel JeromeParker Sep 11, 2013

    is there anything on a 2007 kia sedona cooling fan assembly circuit diagram?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace cooling fan assembly on 2002 jaguar xtype


you can remove from the underside by removing the lower plastic bumper cover, the torx screws will be more than likley siezed, you then have access to the rad fan unit.i think you can just about remove the fan unit without the radiator or you may have remove the whole lot but you will have to remove the support bar, 4 poss siezed bolts.drain the cooling system first then sort it on your bench,hope this is helpfull,

Apr 02, 2015 | 2002 Jaguar X-Type

1 Answer

Removal of radiator on a 2007 ford edge


Removal & Installation
  1. Drain the cooling system.
  2. Remove the cooling fan motor and shroud, as outlined in this section.
  3. Remove the front bumper cover, as follows:
    • Raise and safely support the vehicle..
    • Remove the 2 bolts from the top of the radiator grille.
    • Remove the 4 scrivets from the top of the radiator grille.
    • Remove the 3 lower pin-type retainers.
    • Remove the 6 fender splash shield screws (3 each side).
    • Remove the 4 lower screws (2 each side).
    • Disconnect the side marker lamp electrical connectors, if equipped.
    • Disconnect the fog lamp electrical connectors, if equipped.
    • Remove the front bumper cover.
    • Pull the corner of the bumper cover from the bracket.
  4. Disconnect the upper radiator hose and lower degas bottle hose from the radiator.
  5. Disconnect the lower radiator hose from the radiator.
  6. Lift and remove the tabs from the radiator support and position the radiator towards the engine.
  7. Remove the 2 A/C condenser bolts from the radiator and separate the condenser from the radiator. To install, tighten to 10 Nm (89 inch lbs.).
  8. Remove the radiator.
To install:
  1. Installation is the reverse of the removal procedure, noting the following:
    • Tighten the A/C condenser-to-radiator bolts to 10 Nm (89 inch lbs.)
    • Fill and bleed the cooling system.

Jul 27, 2014 | 2007 Ford Edge SEL

2 Answers

2002 jeep grand cherokee larado is over heating. The cooling fanonly runs if I hotwire it. I changed th thermostat. Temp gauge is reading . Could it be the cooling fan relay if so where is it located. The...


Fan relay is located under pass headlight. Remove light assembly, use 2 1/2 " hole saw to drill hole in plastic housing ,3"from back wall, 3'' from left side.This will put you right over relay. Unscrew two bolts,replace. Relay was $40.... dealer wanted$350 to remove front bumper to replace it.

Sep 02, 2010 | 2002 Jeep Grand Cherokee

2 Answers

How do I replace a radiator on a 2002 maxima


Nissan Car 350Z & Maxima 1999-06 Radiator - Removal & Installation

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    Negative battery cable Coolant reservoir tank and bracket Upper mounting bracket Upper radiator hose Oil cooler lines, if equipped Lower radiator hose Cooling fan and condenser fan Fan motors and shields Radiator

To install:
  1. Install or connect the following:
    Radiator Fan motors and shields Cooling and condenser fans and torque the bolts to 44 inch lbs. (5 Nm) Lower radiator hose Oil cooler lines, if equipped Upper radiator hose Upper mounting bracket Coolant reservoir tank and bracket and torque the bolt to 44 inch lbs. (5 Nm) Negative battery cable
  2. Fill the cooling system to the proper level.
  3. Start the vehicle, check for leaks and repair if necessary.
WARNING Do not remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter of a turn to release built-up pressure. Carefully remove radiator cap by turning it all the way.
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    Negative battery cable Coolant reservoir tank and bracket Upper mounting bracket Upper radiator hose Oil cooler lines, if equipped Lower radiator hose Cooling fan and condenser fan Fan motors and shields Radiator
To install:
  1. Install or connect the following:
    Radiator Fan motors and shields Cooling and condenser fans and torque the bolts to 44 inch lbs. (5 Nm) Lower radiator hose Oil cooler lines, if equipped Upper radiator hose Upper mounting bracket Coolant reservoir tank and bracket and torque the bolt to 44 inch lbs. (5 Nm) Negative battery cable

  2. Fill the cooling system to the proper level.
  3. Start the vehicle, check for leaks and repair if necessary.
WARNING Do not remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter of a turn to release built-up pressure. Carefully remove radiator cap by turning it all the way.
240ef5f.jpg

Fig. Exploded view of radiator and components
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    CAUTION Do not damage or scratch the A/C condenser and radiator core while removing.
    CAUTION Because A/C condenser is onto the front-lower portion of radiator, moving to rear direction should be at minimum.
    Negative battery cable Engine cover Air duct and air cleaner case assembly Bracket mounting bolt for anchoring A/C piping Reservoir tank and bracket Upper and lower radiator hoses Radiator cooling fan assembly On A/T models, A/T fluid cooler hoses. Plug hoses to avoid leakage Cover, then two A/C condensing mounting bolts located in the upper part of the radiator Rotate two radiator upper mount brackets 90 degrees in the direction shown in the illustration and remove fce8147.jpg

    Fig. Removing A/C condensing mounting bolts

    d3c8f50.jpg

    Fig. Rotating radiator upper mount brackets 90 degrees

    edb9f67.jpg

    Fig. Removing radiator
  4. Remove the radiator by performing the following:
    CAUTION Lifting A/C condenser should be minimum to prevent a load to A/C piping.
    With lifting and pulling radiator in a rear direction, disassemble lower mount from radiator core support center. Lift A/C condenser up and remove radiator after disengaging the fitting as front-bottom surface After removing radiator, put A/C condenser on radiator core support center to prevent a load to A/C piping, and temporarily fix it with rope or similar means

To install:
  1. To install, reverse removal procedure.
  2. Check radiator cap for any leaks.
  3. Start and warm up engine. Check for engine coolant leaks and A/T fluid leaks.

Hope this help (remember comment and rated this).

May 12, 2010 | 2002 Nissan Maxima

1 Answer

How do you install radiator on chrysler 2002 town and country


Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004
Radiator - Removal & Installation
  1. Disconnect the negative battery cable.
    CAUTION Do not remove the radiator cap or drain with the cooling system hot and under pressure or serious personal injury can occur from hot pressurized coolant.
  2. Place a drain pan under the radiator drain. Open the radiator drain plug and allow the coolant to drain.
  3. Remove the air intake resonator from the air cleaner assembly.

    6521383.jpg
    Fig. Before removing the hood latch, mark its location on the crossmember with a paint marker or other tool

    10ccd56.jpg

    Fig. Once the hood latch is matchmarked, remove it from the crossmember (without disconnecting the cable) and set it aside
  4. Remove the Coolant Recovery System (CRS) overflow tank filler neck hose.
  5. Disconnect the cooling fan electrical connector located on the left side of the cooling fan module.
  6. Remove the CRS overflow tank mounting screw from the upper radiator crossmember.
  7. Remove the upper radiator-to-crossmember mounting screws.
  8. If equipped, disconnect the engine block heater wiring connector.
  9. Remove the upper radiator crossmember.

    a267e07.jpg
    Fig. Remove the grill extension...


    931f3b8.jpg

    Fig. ...and the upper radiator-to-crossmember bolts, then . . .


    9eec6fc.jpg
    Fig. ...unbolt the crossmember . . .


    f878ac0.jpg
    Fig. ...and lift it from the front of the vehicle
  10. Remove the entire air cleaner assembly.
  11. Disconnect and plug the automatic transaxle oil cooler lines from the radiator.
  12. Disconnect the upper and lower radiator hoses from the radiator. Remove the lower radiator hose clip from the cooling fan module.
  13. Remove the A/C condenser mounting fasteners and separate the A/C condenser from the radiator. Be sure the condenser is supported in position.
  14. Remove the A/C filter/drier mounting bracket, 2 mounting bolts to the cooling fan module and 2 mounting nuts to the filter/drier. Remove the mounting bracket.
  15. Carefully lift the radiator out of the engine compartment. Be careful not to damage the radiator cooling fins or water tubes during removal.

continue...

Mar 27, 2010 | 2002 Chrysler Town & Country

1 Answer

I need to reconnect my radiator in my 2000 ls v8


For 2000 Lincoln LS 3.9L SFI DOHC 8cyl...
Radiator - Removal & Installation
  1. Drain the engine cooling system.
  2. Remove the upper radiator sight shield.
  3. Remove the air cleaner outlet tube.
  4. Remove the six bolts and the two radiator upper support brackets.
  5. Remove the upper radiator hose.
  6. Remove the bolt and position the receiver drier aside.
  7. Disconnect the dual flow coolant valve electrical connector and the A/C line from the fan shroud.
  8. 3.0L engines only:
    Disconnect the Throttle Position (TP) sensor and the Idle Air Control (IAC) valve electrical connectors.
  9. Remove the bolts.
  10. Remove the bracket.
  11. 3.9L engines only:
    Remove the bolt and position the electric water pump aside.
  12. Disconnect the high pressure cooling fan bracket and line.
  13. Inspect the seal and install a new seal if necessary.
  14. Disconnect the return hose from the cooling fan and shroud.
  15. Separate the return hose from the fan shroud and position aside.
  16. Remove the two bolts and the fan shroud assembly.
  17. Remove the A/C condenser.
  18. Remove the two bolts and position the multi-cooler assembly aside.
  19. Remove the bolts and the condenser support brackets.
  20. Remove the radiator.

To install:
  1. Install the following:

    Radiator Condenser support brackets Multi-cooler assembly A/C condenser Fan shroud assembly
  2. Connect the return hose to the fan shroud
  3. Connect the high pressure cooling fan bracket and line.
  4. 3.9L engines only:
    Replace the bolt and position the electric water pump aside.
  5. 3.0L engines only:
    Connect the Throttle Position (TP) sensor and the Idle Air Control (IAC) valve electrical connectors.
  6. Replace the following
    The upper radiator sight shield. The air cleaner outlet tube. The six bolts and the two radiator upper support brackets. The upper radiator hose. The bolt and position the receiver drier aside.

Hope help with this (remember rated and comment this).

Mar 17, 2010 | 2000 Lincoln LS

1 Answer

How to replace radiator in a 2002 jeep grand cherokee v8


WARINING
Do not remove the cylinder block drain plugs or loosen the radiator drain **** with the system hot and under pressure. Serious burns from coolant can occur.

WARNING When removing the radiator or A/C condenser for any reason, note the location of all radiator- to-body and radiator-to-A/C condenser rubber air seals. These are used at the top, bottom and sides of the radiator and A/C condenser. To prevent overheating, these seals must be installed to their original positions.

Removal & Installation:
  1. Disconnect battery negative cable.
  2. Remove radiator pressure cap.
  3. For access to radiator draincock, remove radiator grill mounting screws and remove grill.
  4. Attach one end of a 24 inch long x 1 / 4 inch ID hose to the radiator petcock Put the other end into a clean container. Open petcock and drain radiator.
  5. Detach power steering fluid reservoir from fan shroud and lay aside.
  6. Disconnect electric cooling fan electrical connector, if equipped
  7. Disconnect CRS hose from radiator filler neck and remove from shroud retaining loops.
  8. Remove the four (4) viscous fan/drive assembly nuts from the water pump pulley and remove fan/drive assy.
  9. Remove the four (4) fan shroud to core support mounting screws.
  10. Remove the electric fan (if equipped) and shroud assembly from the vehicle
  11. Remove radiator upper crossmember.
  12. If equipped with air conditioning, separate radiator from condenser by removing condenser-to-radiator mounting brackets.
  13. Disconnect upper and lower radiator hoses.
  14. If equipped, disconnect and plug automatic transmission fluid cooler lines. Quick Connect Fitting Release Tool 6935 may be needed. If equipped with remote transmission cooler, remove line to cooler from bracket at bottom of radiator
  15. Lift radiator straight up and out of engine compartment taking care not to damage fins.
  16. If radiator is to be replaced, be sure to remove and transfer any components not included with replacement radiator.
7479d7e.gif

To install:
  1. The radiator is supplied with two alignment dowels. They are located on the bottom tank and fit into rubber grommets in the radiator lower crossmember.
  2. Lower radiator into engine compartment. Position alignment dowels into rubber grommets in radiator lower crossmember.
  3. If equipped with air conditioning, attach condenser to radiator with mounting brackets
  4. Install radiator upper crossmember and four mounting bolts.
  5. Install radiator upper crossmember-to-isolator nuts. Tighten nuts to 86 inch lbs. (10 Nm) torque. If isolator-to-radiator nuts had been removed, tighten them to 47 inch lbs. (5 Nm).
  6. Connect radiator upper and lower hoses.
  7. If equipped, connect automatic transmission fluid cooler lines. If equipped with remote cooler, attach cooler line to bracket at bottom of radiator.
  8. Install electric fan (if equipped) and shroud assembly. Insert alignment tabs at bottom of fan shroud into slots in bracket at bottom of radiator. Tighten mounting bolts to 31 inch lbs. (3 Nm).
  9. Connect electric cooling fan electrical connector.
  10. Install power steering reservoir to fan shroud.
  11. Install grill.
  12. Connect battery negative cable.
  13. Fill cooling system with correct coolant.
  14. Install pressure cap.
  15. Check and adjust automatic transmission fluid level (if equipped)
  16. Start engine and visually check for leaks.

For more details I suggest review the Service Repair Manual:
- Section-07-Cooling-System-Ewj7 (page 33 and next)
- Section-07a-Cooling-System-Ewj7a

I really hope helped with this (remember rated and comment this help) Good luck.

Nov 13, 2009 | 2002 Jeep Grand Cherokee

1 Answer

2002 landrover freelander cooling question


Contact Checkers, Autozone or leading Independent, and they will have access to a List of Non Tied Parts After market suppliers.
Regards, DT

Aug 27, 2009 | 2002 Land Rover Freelander

1 Answer

Replace the radiator


Removal and Installation
On all engines
  1. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling And Bleeding in this section.
  1. Remove the upper radiator sight shield.
  1. Remove the air cleaner outlet tube. For additional information, refer to Section 303-12 .
  1. Remove the six bolts and the two radiator upper support brackets.
  1. NOTE: 3.9L shown; 3.0L similar.
    Remove the upper radiator hose.
  1. Remove the bolt and position the receiver drier aside.
  1. Disconnect the dual flow coolant valve electrical connector and the A/C line from the fan shroud.
On 3.0L engines
  1. Disconnect the throttle position (TP) sensor and the idle air control (IAC) valve electrical connectors.
  1. Remove the bracket.
    1. Remove the bolts.
    1. Remove the bracket.
    1. Disconnect the high pressure cooling fan bracket and line.
    1. Using the appropriate special tool, install a new O-ring on the power steering pressure hose fitting.
    1. Separate the return hose from the fan shroud and position aside.
    1. Remove the two bolts and position the fan shroud assembly.
    1. Disconnect the return hose from the cooling fan and shroud and remove the cooling fan and shroud assembly.
    1. Remove the A/C condenser. For additional information, refer to Section 412-03 .
    1. Disconnect the lower radiator hose.
    1. Remove the two bolts and position the multi-cooler assembly aside.
    1. Remove the bolts and the condenser support brackets.
    1. Remove the radiator.

Apr 29, 2009 | 2002 Lincoln LS

Not finding what you are looking for?
2002 Land Rover Freelander Logo

1,118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...