Question about 2001 Ford Escape

1 Answer

Error code P0402 2001 Ford Escape

Okay, I posted on this site back on April 7,2009 about error code "P0402" for my 2001 Ford Escape. I have replaced the following parts:
EGR valve, DPFE sensor, idler air control valve, EGR vacuum sylenoid and "ALL" four of the O2 sensors...I AM AT A LOSS! The light came back on again! I am about to drive the truck into a lake! That should fix the problem.

Posted by on

  • Anonymous Mar 31, 2014

    how to remove and clean carbon deposits from egr valve on a 2001 ford escape

  • Anonymous Apr 01, 2014

    My Ford Escape does not shut off when the ignition key is turned off.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

This might sound crazy but it works with these Escapes most of the time. Go buy a can of Seafoam from your part store. With the engine off, disconnect the brake booster vacuum line and place it in the can of sea foam. Start your engine and keep your foot on the gas pedal and keep the RPM's around 2k.The vehicle is going to smoke like crazy for 10 minutes or so, when the smoke clears up for the most part, go drive it for a couple of miles and see if that helps. It cleans out the carbon buildup from you intake and sensors and takes care of that code you getting most of the time. OR, you purge canister needs to be replaced...

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting error code U0414 P0118,P2060F what does that mean and what parts do I need to change for my ford escape 2008


With all these codes you need a professional to help fix this, you will likely throw parts at it and still not fix it. If you do want to try a repair at very least go on eBay and try and find a used factory repair manual set. If you google each code the explanation of the code will show, but it will only give you a system of the car, that means it can be a sensor or a part or the wiring or the computer that runs the system. Good luck

Jun 25, 2016 | 2008 Ford Escape

1 Answer

2003 Ford Escape will not start. Error code P0446 came up on the reader. Replaced starter and did not help.


That code does not have anything to do with it not starting. That code is for EVAP control leak. What is the car doing when you try and start it? Does it turn over or anything?

Aug 25, 2013 | 2003 Ford Escape

1 Answer

P1676 error on a ford excape - what is the cause of this error code


is this Autozoned code? or a real scan tool. for modern cars.

did they show you, tell you or did you write it down wrong?



do post what tool produced this code, its rare.



a Honda Ford? really??? is this an engine swap?

if not a honda. you might want to post to Ford, as we dont have books on fords here.

but like all DTCs there are many causes, and the tech does the test

stated in the FSM. got FSM? factory service manual... youd need that.



no engine stated, or any year, Ford, so not possible to answer lacking that..

P1 xxx means factory ford only code. do not read other makers of cars codes, just ford. or fail big time..



i looked from 05 to 2011 codes for ford escape and get zero

Jul 30, 2013 | 2004 Honda Accord

1 Answer

Radio code ford escape 2003


You need to take the radio out of the dash. Post up the serial number beginning with the letter M and I will give you your code.

If the serial begins with V this is a newer radio and you cannot get these for free anywhere on the net. I recommend this site for the newer V serials requiring codes. Its the cheapest and best around. Click here.

Mar 29, 2012 | 2003 Ford Escape

1 Answer

2001 Ford Escape error code P0402


Ok here is the solution when I had the exact same problem with my 2001 Ford Escape:
Replace:

Idler air control valve
EGR vaccum sylenoid
EGR valve

I did all of this work myself (and as a girl it was not hard at all), it cost me around $170.00 for all of the parts, had it done in less than 2 hrs., erased the codes and have not had a problem since then! I hope this helps you out, cuz it sure would have helped me out when I encountered the same problem.

Apr 07, 2009 | 2001 Ford Escape

1 Answer

I don't know how to work my 2003 ford escape cd player, it says no cd error??????


unplug the battery for about ten minutes to reset the stereo... if you need a code to activate it make sure you know the code and how to enter it. do you get this error for all cd's or just ones you have burnt yourself ?

Mar 16, 2009 | 2003 Ford Escape

Not finding what you are looking for?
2001 Ford Escape Logo

958 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...