Question about 2003 Chevrolet Silverado 2500HD

1 Answer

I have a 96 chrysler seabring the break lights

I have a 96 chrysler seabring the break lights won't work
all other lights work

Posted by on

  • nathan May 11, 2010

    did you check the fuses? if yes check the brake light switch , it is under the dash behind brake pedal arm use wire probe and push switch and see if power in both wires if only in one bad switch.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Check the brake light switch under the dash toward the top of the pedal make sure the switch,connector and wiring are ok check the fuse also

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I find the downstream 02 sensor on a 2004 2.4l seabring


I have no specific model experience but the downstream or diagnostic O2 sensor is generally found screwed into the exhaust system just after the catalytic converter.

Feb 28, 2015 | 2004 Chrysler Sebring

1 Answer

Have a 1999 chrysler seabring coup started fine yesterday morning drove kid to school came home put brakes on it started it pump the brakes few time put n reverse died wont start


HI,THAT IS A USUAL ISSUE RELATED TO THE ELECTROMAGNET WHICH IS ENGAGED ON "P or N" position.Charge your battery overnight,try your handbrakes,if they work fine,just leave the car in whenever you stop and put your handbrake on.This won discharge then the battery unless there is a unrelated electrical fault in the system.

Dec 18, 2014 | 1999 Chrysler Sebring

1 Answer

1999 CHrysler Seabring Jxi will not start. Has power, lights, radio and chimes work, turn the key and nothing.


check for battery voltage at battery should be over 12 volts, try jump starting to ensure your starter is good, once started check for voltage at battery should be over 13.5 to ensure charge system is working if system is charging replace your battery

Sep 01, 2013 | 1999 Chrysler Sebring

1 Answer

Seabring a/c pressure switch - do I need to bleed the a/c lines before installing a new a/c pressure switch.


You don't "bleed" AC systems. You completely evacuate the system into a recovery machine, replace you parts and put the system under vacuum for at least 30 minutes before charging it with the exact, weighed charge of refrigerant along with some refrigerant oil to replace what you lost..

Aug 16, 2013 | Cars & Trucks

1 Answer

The driver window on my 2004 chrysler seabring has gone down and won't come up, how do i relplace the motor?


The window regulator may have broken
That is more common than a failed motor

You have to remove the inner door panel,
to access the inside of the door ,to make
necassary repairs

Aug 01, 2011 | 2004 Chrysler Sebring

2 Answers

My 2007 seabring won't shift out of park... Car


The car is probably on a steep hill and a lot of pressure is on the park pawl in the automatic transmission. If this is the case, a hard sudden pull should release it. Make sure the brake is on. When parking on a hill in the future use the parking brake before placing the lever in park.

May 31, 2011 | 2007 Chrysler Sebring Sedan

2 Answers

After my recent Oil Change my Chrysler Seabring 2008 Seabring Convertible gives me a Change Oil Message each time I start the engine.


TRY RESETTING OIL CHANGELIGHT BY TURNING THE IGNITION SWITCH TO THE ON POSITION WITH ENGINE OFF.TURN IGNITION SWITCH ON 10 SECONDS PUMP ACCELRATOR SLOWLY 3 TIMES .UNTIL OIL CHANGE LIGHT FLASHES THEN IT HAS RESET.

Oct 18, 2010 | 2008 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...