Question about 2004 Hyundai Elantra

3 Answers

When I put the trans in gear it dous nothing cant even tell its in drive

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

First check and make sure there is enough transmission fluid in the transmission, check the fluid level with the car running, add if it needs fluid make sure you consult dealer for the correct fluid to add, then try drive if it still has issue bring it to the dealer to check the transmission ecm for stored codes otherwise you will need to check all connections to the transmission an maybe replace the primary shift solenoid, it is not a job I recomend for an inexperienced individual.

Posted on Jul 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

Transmission control module or bad transmission.

Posted on Jul 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Follow the shifter lever down to under the dash and make sure there isn't anything loose or a bolt missing at joints. Sometimes bolts shake loose. Try moving the rod, further down under the dash and see if you can get it to shift. If not, then you need to follow it to the transmission and see if it broke or is loose anywhere. Harder than it looks for sure to do this, so let me know how it goes.



Benjamin

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 ford explorer shuts off in drive


Check the Switch on the side of the trans,
that tells the computer what gear your in.
It could be bad or need some type of shift
cable adjustment.

Jul 20, 2013 | Cars & Trucks

1 Answer

Have a used 2005 jeep Laredo, and when i use the auto stick function, for example downshifting to 3rd, car will get up to 3rd gear and redline, when i push autostick lever to the right instead of going to...


I had that same problem on a trans years ago, had to go to neutral and back to drive to get drive. I just delt with it in that manner. It doesn't do any harm to the trans at all doing that. Your best getting a specialist do a diagnostic on your trans eventually.

Jul 15, 2017 | 2005 Jeep Grand Cherokee

1 Answer

Hi, My 02 Range Rover has a warnig light showing trans safe mode. I put it into low range with no problem drove for a couple of miles and tried to put it back into high, with no joy. It is driving ok and...


these rovers are made like a big computer...if theres is anything wrong with the transmission it will put itself into "safe mode" so it wont rev high and basically you cant go very fast. so you could have a stripped gear, low fluid, or even the gears could be too close or too far apart.

Dec 21, 2010 | Land Rover Range Rover Cars & Trucks

1 Answer

2002 ford escort zx2 tranny slipping from Andrew


Yes. Having owned a trans repair shop, I will tell you, never change fluid on a slipping trans or one that the fluid is very dark and stinks. Why? It will slip even more, to the point that you can't use it.

The Trans is burnt inside and has to be rebuilt or replaced with a remanufactured one. $1600.00 or more

I will be kind here, which is hard for me being a car guy.
Why did you buy a vehicle at an auction?

You buy cheap,you got nothing. I would expect those kind of problems, when deciding on a purchase such as you made and leave room in the puchase price to cover spending at least two weeks going thru the entire vehicle before putting it on the road.

Apr 30, 2010 | 2002 Ford Escort

2 Answers

Drove my suburban in the driveway, tried to back out and it sounded like i hit something in the back under vehicle, there was nothing there. now vehicle will not move at all. i am getting alot of different...


1)check that the park brakes are not seized on.
2)check the driveshaft where it connects on the differential.
broken driveshafts and universal joints are common on those.

Mar 21, 2010 | 1993 Chevrolet Suburban

1 Answer

2005 Jeep Wrangler X automatic - can't engage gears


HELLO , SOUNDS LIKE YOUR TRANS IS BAD KEEP IN MIND 1 GEAR AND REVERSE IS SAME GEAR SORRY BUT YOU MUST HAVE IT REPLACE OR OVERHAULD .

Feb 13, 2009 | 2005 Jeep Wrangler

Not finding what you are looking for?
2004 Hyundai Elantra Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...