Question about 2004 Hyundai Elantra

3 Answers

2004 hundy elantra code 700 replaced engine now the car wont go in any gear runs good though

Posted by on

  • cary_hogue Jul 16, 2009

    checked all the conections is their a fuse that could have blown that is not located in eather fuse box

×

Ad

3 Answers

Trouble Code: P0700 Transmission Control System Signal Possible Causes:

Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the TCM(transmission control module) may have failed.

Posted on Jul 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

Check the connections on the TCM (Transmission control module)

Posted on Jul 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

Check this part of the wiring harness that goes to the transmission a plug to the transmission may have come loose or been damaged during the engine change, check all plug connections to transmission.

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 2008 Hyundai elantra and get code 700& 760 what that mean?


Code 700 is a generic code that means a problem has occured with the transmission control module, and code 760 is for a shift solenoid failure.
The shop would use a repair manual to test the circuit for the shift solenoid. If the solenoid is faulty, it would need to be replaced and the module reset.

Sep 03, 2015 | 2008 Hyundai Elantra

1 Answer

I just put a new clutch in my 04 elantra and its stuck into gear wot do i do


clutch is not disengauging when the motor is running could have put clutch plate in wrong way do you have a good clutch pedal,did you clean of new pressure plate might have had a sticky coating on it

Dec 27, 2012 | 2004 Hyundai Elantra

1 Answer

My 2004 Hyundai Elantra surges and jumps gears


You got ripped off by the mechanic. A good mechanic can pinpoint the problem by using a scan tool. Take vehicle to autozone or similar and have it scanned for codes this will give you a idea what is wrong. I believe the problem is exhaust related because of the blinking light.

May 29, 2017 | 2004 Hyundai Elantra

2 Answers

I have an 04 hyundai elantra and it jerks when i drive, i took it to the shop and no codes came up and no check engine light came up. My car needs a fuel pump could this be why the car jerking? And when...


I would check the transmission fluid. It may need changed and the filter changed. Perhaps you are not getting a good spark from your spark plugs or coils. Has it been awhile since you had a tune up?

Mar 03, 2011 | 2004 Hyundai Elantra

1 Answer

2004 Hyundai Elantra - P2626 and P2195


Your transmission is slipping which can cause a huge amount of damage both to the car and your wallet. Take it in for service as soon as you can.

Jun 21, 2010 | 2004 Hyundai Elantra

1 Answer

Could someone please advise of the correct method of fitting a new timing belt to a 2004 Hyundai Elantra XD GL.


If you are not very mechanically inclined, timing belt removal and replacement is best left to a professional because misplacement of the crank and cam gear positions can cause the engine to run poorly or even cause damage upon starting the engine.

Feb 06, 2010 | 2004 Hyundai Elantra

2 Answers

2004 Hyundai Elantra GT (manual)Loosing speed/power while driving


sounds like the clutch is worn out and requires replacement.

Jan 19, 2010 | 2004 Hyundai Elantra

Not finding what you are looking for?
2004 Hyundai Elantra Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...