Question about 1997 Chevrolet Tahoe

1 Answer

#9 fuse and #14 fuse blow when lights are turned on. With thse fuses pulled the taillights, brake lights and turn signals all work. What could be wrong. After market radio installed recently.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 467 Answers

A wire has been place incorrectly in the system. take the car back to who ever install the radio and have them check for same

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No taillights park or dash lights


check park/tail fuse regarding dash ,park ,tail problem .brake light on passenger side is probably the brake globe needs replacing .Turn signals on passenger side could be globes or switch,check globes first ,if globes and fuse are ok ,may well be the switch especially if park switch and turn signals are on the same switch lever/stalk

Jan 15, 2014 | 1990 Buick Century

1 Answer

96 chevy silverado, taillights just stopped working... nothing to cause this effect. they worked the night before. they just stopped. b/u brake hazards and turn signals all work. checked all fuses in the...


The turn signal switch in the steering column has a short in some models. Have someone watch your brake lights and move the 4 way flasher on top of the column from left to right without deploying the switch for the 4 ways. If your brake lights flash ,the harness needs to be replaced if they are still available. Harness around 300.00 plus labor.

Jan 10, 2013 | 1996 Chevrolet K1500

2 Answers

Brake lights dont work Bulbs are good and brake light switch is good


The power flow for the brake lights goes like this: Fuse ->Brake switch -> Turn signal switch -> Rear lights. The only difference is, if you have a 3rd brake light in your rear window, that gets its power directly from the brake switch. It does not go thru the signal switch first. So, if you are having a brake light problem, and your fuses are good, check the 3rd light in the rear window, if it lights up (assuming the bulbs are good, no one ever changes them), then the problem is most likely in the turn signal switch, hope this helps!

Aug 28, 2011 | 1992 Subaru Legacy

3 Answers

I have a 1989 Buick Park avenue. A month ago all of the back lights stopped working. Tail lights, brake lights, reverse lights.


Check your fuses underneath the drivers side steering wheel. Flip the plastic cover over and there will be a diagram showing the fuse that controls the taillights/stoplamp. Pull the fuse out and replace it with the same number fuse and your taillights and brake lights will work again. If the fuses are ok, pull each taillight bulb out and replace it with a new bulb. Sometimes when one light bulb fails, all of them will fail.

Aug 01, 2010 | Buick Park Avenue Cars & Trucks

3 Answers

How to change a tail light bulb in a honda element


Open the hatch and the tailgate.

Remove the two mounting screws with a Phillips-head screwdriver, and remove the taillight assembly from the body by pulling it back.

Determine which of the three bulbs is burned out: brake/taillight, turn signal light or backup light. (I assume you’ve already determined this)

Remove the socket by turning it one-quarter turn counterclockwise.

Pull the bulb straight out of its socket.

Push the new bulb straight into the socket until it bottoms.

Reinstall the socket into the light assembly by turning it clockwise until it locks.

Test the lights to make sure the new bulb is working.

When reinstalling the taillight assembly, first place the two pins in the holes in place. Tighten the two mounting bolts.

Hope this is helpful to you.

Jan 10, 2010 | 2003 Honda Element

1 Answer

Left and right rear brake lights not working. Center rear light does work? Is it the same fuse? And service manual unclear, which fuse is it? thanks Tibs


Fuse number 7 (15A, Horn Stop) in the under hood box should be your brake lights. If you are referring to your high mount brake light as the third light, I believe they work on the same fuse.
I would check the bulbs, although it may not be likely that both would go at the same time. There are three bulbs in the unit: brake/taillight, turn signal, and backup.
The units themselves come out pretty easy. Just remove the two phillip's head screws and pull the unit back to get it out. Then turn sockets 1/4 turn and out to check the bulbs. Bulbs pull straight out.
Hope this helps you.

Nov 23, 2009 | 2006 Honda Element

1 Answer

My left rear taillight keeps blowing a fuse... and then going out...the brake lights work and the turn signals work... but taillight does not.


you should look at the socket and the wires at the socket for a burn mark or damage.if so you can replace a socket.

Jun 22, 2009 | 2002 Chrysler Town & Country

Not finding what you are looking for?
1997 Chevrolet Tahoe Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...