Question about 2004 GMC Envoy
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Gmc Envoy 2004 Seat heaters
I have the same problem with my 2004 HD Sierra. I found that the "MBEC" 50 amp fuse in the under hood fuse box had blown. Replaced that and it works now. This has happened twice in 2 years.
Posted on Dec 30, 2008
The battery is on the right side behind the fuse box. You need a metric set to undo the 3 screws. Theres one that attaches to the body, one to the bar that goes along the top, and theres one on the left side below the vacuum hose and air induction. After you've taken out those three, you should lift the whole thing out(battery and shroud) together. It's hard to take the shroud off before you lift the battery out. After that, you have to pry the shoud off the battery. The two terminals in the back make it hard. Then just go to any auto parts store and they'll give you a new one.
Posted on Jan 28, 2009
There is a recall on the panel Cluster... call your dealer and have it checked out.. mention the recall... www.lemonauto.com
Posted on Jun 05, 2009
remove cover.take off back wheels and calipers (or drums).turn differential to where you see small bolt/pin (5/16) horizontally (same direction as axles)on right side of differential.remove bolt/pin.A large pin (about 5"long 3/4"diameter) should slide out differential with ease ( you may have to tap one side of the large pin).turn differential to completely remove large pin.turn differential so you can see in the view window.push each axles in (they'll go in about 1 1/2"each) You may hear one of the axle C-clips fall.If not use a small telescoping magnet to remove the C-clips from the axles through the differential window.pull each axle out about 10"so they are out of the diff.Now remove the cap bolts(4-5/8"bolts) and remove the caps(mark the caps so they go in excactly the way they came out.be careful the diff might fall out.If not you may have to use a long bar or 2x4 to wedge and pry the differential out. Have a basket/crate w/rags in it to catch the diff.TIP:If you are removing the ring gear from the diff, the bolts are left handed bolts meaning you have to turn them clockwise to loosen and counter clockwise to tighten ; )
Posted on Sep 15, 2009
Testimonial: "thank you helped ALOT perfect instructions "
It's actually very simple. Follow the upper radiator hose to the top of the engine block. You will see a housing which the hose is attached to. Remove the hose from the housing. The housing will have 2 or 3 bolts holding it down. Remove the bolts and lift the housing off. The thermostat will be sitting there and you simply need to remove it.
Posted on Dec 31, 2009
Tips for a great answer:
Feb 16, 2015 | 2004 GMC Envoy
Nov 13, 2012 | 2004 GMC Envoy
Aug 26, 2011 | 2004 GMC Envoy
Jul 28, 2011 | 2004 GMC Envoy
Jun 02, 2011 | 2004 GMC Envoy
Mar 17, 2011 | 2004 GMC Envoy
Feb 16, 2011 | 2004 GMC Envoy
Nov 24, 2010 | 2004 GMC Envoy
Jun 21, 2009 | 2004 GMC Envoy
84 people viewed this question
Usually answered in minutes!