Question about 2003 Buick LeSabre

1 Answer

Power to ac clutch fuse no power at clutch on 03 leSabre

Power to ac clutch fuse no power at clutch

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

If your AC system is otherwise operational, it may just need to be charged. The compressor will not come on unless there is sufficient charge/pressure in the system. So, first thing to check is the amount of charge in the system. You can purchase a gauge , similar to a tire gauge, that will give a reading of the system's charge. The gauge hooks up to the low pressure side ,or the larger diameter hose/line, same as where you place the re-charge hose. Again, if the system is operational, as you charge it, the compressor should kick in. At first, it will cycle on and off until the system reaches sufficient pressure.
Hope this helps...

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a 03 xtara ac wont work clutch not kicking in no power to it run power to clutch n still nothing freon full


Clutch coil bad . The A/C compressor clutch coil is a electromagnet an you need to check it with an ohm meter . Check out video on youtube testing A/C clutch coil .

Jul 14, 2016 | AC Cars & Trucks

2 Answers

Radio, lighter, and air conditioner on 92 buick le sabre malfunctioned...radio and lighter won't work at all, air conditioner won't recognize being turned on anything but defrost and defog. Could it be...


Check for a fuse that indicates radio and replace it if it's burnt through or melted or discolored. The Buicks have dash controls that require expensive repairs sometimes to get the temperature controls to work so some people jump around the controls by installing a separate toggle switch that directly turns the AC unit off and on for 92 through 94 Buicks. Any AC shop can install the bypass wires.

Jul 25, 2010 | 1992 Buick LeSabre

1 Answer

Power to both fuses the one in the cabin fuse box as well as the one under the hood but no power to presure switch on accumulator or to the compressor


There maybe a problem with the air conditioner,freon low,or bad clutch,the ac system has shut down because of this,disconnect the negative battery cable for 20 seconds and then replace it,this will reset the ac system,then make sure it does not run long with low freon,or it will shut down again.

Apr 12, 2010 | 1992 Buick LeSabre

2 Answers

AC clutch is grinding how do i fix? 1997 buick lesabre


Remove the clutch with a clutch removal tool after removing nut. The pulley for the belt does not need to be removed. The clutch needs to be shimmed with some small thin shims or shim that look like washers to space it out from the pulley. You will not lose freon doing this.

Dec 07, 2009 | 1997 Buick LeSabre

1 Answer

AC Clutch in Buick Lesabre


Rent the clutch tool from the parts house. Then remove the nut in the center of the clutch. It should have a washer as well. Set these aside and install the clutch removal tool per directions in the box. Remove the front hub with tool and be very careful so you don't drop the small group of flat washers that are inside. It is these washers that determine the space in the clutch gap. Simply add or remove washers to adjust the gap. Once the gap is set then re-assemble and test. Hope this helps get you cool again. Good luck. If you feel that this solution has answered you question then please rate this solution. Thanks cj2176.

Jul 15, 2009 | 1996 Buick LeSabre

1 Answer

Remove clutch for ac compressor


I just removed the a/c clutch on my 1994 lesabre with a puller tool that I bought from RJ tools through EBAY for $23

Jun 13, 2009 | 1994 Buick LeSabre

1 Answer

Ac not working


If the clutch isn't cumming on you want get A,C faulty ac motor.Change

May 30, 2009 | 2003 Ford Expedition

1 Answer

Ac clutch not enguaging on 1993 Buick Lesabre


on some gms you need to hook up a scan tool and reset the ac pressure switches.

Apr 01, 2009 | 1993 Buick LeSabre

1 Answer

Cluthch for AC


power to the clutch went to a lot of parts.

you can trace the power from the fan blower switch, then to the ac switch, then to the pressure switch then to the relay.

ow i forgot, the power source fuse is the first to check also. the fan fuse is different from the compressor fuse. pls check them both.

tnx 4 using fixya,

drcool

Jul 20, 2008 | 2004 Nissan XTerra

Not finding what you are looking for?
2003 Buick LeSabre Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...