I will assume you mean just the bumper cover, not the actual bumper. Most cars today have these held on with large plastic "pop-rivets" which require a special tool to install them. The old rivets are drilled out. One some, you may be able to use carriage bolts to install, but sometimes a friendly body shop will let you borrow the tool.
SOURCE: 2006 chevy hhr transmission fluid and filter change
usually a pan under the trans. anywhere from 10 to 22 bolts. filter inside. some vehicles have an oil style filter on the externally, but i don't think that this is one.
SOURCE: replacing front bumper on 1999 buick regal
7/16th or 10mm Sheetmetal nuts All over Behind the Bumper Thak Bumper off first
SOURCE: where do you put the power steering fluid in a chevy hhr 2006 model
the power steering fluid resevoir is located on the passenger side of the engine compartment near the fire wall. mostimes in order to fill it you have to remove the altenator to remove the fill cap to add the fluid.
SOURCE: how do you replace a blower motor on an 06 hhr
you need to cut out the bottom of the box where the motor sits and get an blower motor attachment kit from local gm dealer
314 views
Usually answered in minutes!
×