Question about 1995 Nissan Pathfinder

1 Answer

Do i need to remove the manifold in order to remove the starter on my 1995 6 cylinder pathfinder

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 146 Answers

The exhaust maniford does not need to be remove. The starter will have to come pass the front axle (if 4 wheel drive) and exit below the alternator at the front of the engine. This can be frustrating but it can be done.

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to replace starter


William,
Remove the following parts to make room and take out starter
through the clearance between body and frame.
' Image
1.Remove FR R.H splash guard.
2.Remove oil pressure switch connector.
3.Remove oil filter.
4.Remove exhaust manifold heat insulater.
5.Remove fuel tube retainer bolt.

25312103-mkm0xbqveb5zta3uncrswycs-4-0.png Auto Repair Help US

Dec 08, 2014 | 1995 Nissan Pathfinder

1 Answer

Engines cranks just fine, really strong.. but will not start. 1995 Nissan Pathfinder Automatic 4x4 6 cylinder


in order for an engine to run, you need compression, fuel, and spark. you are probably missing one of these 3. remove your air tube from the air filter box .eand spray starting fluid, or brake cleaner into the throttle body. if it starts, you pave a fuel problem. i e fuel pump of pump control

Aug 03, 2013 | 1995 Nissan Pathfinder

1 Answer

How do i change the starter motor on a 1993 pathfinder


  1. Remove the exhaust manifold heat insulator.
  2. Remove the fuel tube retainer bolt.
  1. On 2wd models with the 6-cylinder engine:
    1. Remove the front right wheel.
    2. Remove the front gravel shield.
    3. Remove the exhaust manifold heat insulator.
    4. Remove the exhaust manifold.
    5. Detach the oil pressure switch connector.
  2. Unfasten the remaining electrical connections at the starter solenoid.
  3. Remove the two nuts holding the starter to the bell housing, then pull the starter toward the front of the vehicle and out.

To install:

  1. Insert the starter into the bell housing, being sure that the starter drive is not jammed against the flywheel.
  2. Tighten the attaching nuts and secure all electrical connections to the starter assembly.
  3. Install all remaining components in reverse order of removal.
  4. Reconnect the battery cables. If applicable, refill and check the oil level. Check the starter assembly for proper operation.



// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 31; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos'; c17hydro_100.gif

Starter removal on 2WD-6-cylinder engine






c17hydro_101.gif

Starter removal on 4WD-6-cylinder engine


On 4wd models with the 6-cylinder engine:

Remove the front gravel shield.

    1. Detach the oil pressure switch connector.
    2. Drain the engine oil and remove the oil filter.

Jan 19, 2011 | 1993 Nissan Pathfinder

1 Answer

Finding the starter on 2005 nissan pathfinder


STARTER LOCATION ON 4.0 V6 -REMOVE ENGINE UNDER COVER.REMOVE EXHAUST MANIFOLD COVER FROM EXHAUST MANIFOLD RIGHT BANK TO GAIN ACCESS TO STARTER COVER BOLTS.THEN REMOVE STARTER COVER BOLTS AND REMOVE STARTER COVER.**** 5.6 V8 ENGINE YOU HAVE TO REMOVE INTAKE MANIFOLD TO GET TO THE STARTER.

Sep 10, 2010 | 2005 Nissan Pathfinder

1 Answer

Put in a new starter on a 1992 path finder


REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable at the battery, then disconnect the positive battery cable at the starter. Fig. 1: Starter removal on 4WD — 6-cylinder engine 86713015.gif
    Fig. 2: Starter removal on 2WD — 6-cylinder engine 86713016.gif

  2. On 4wd models with the 6-cylinder engine:
    1. Remove the front gravel shield.
    2. Detach the oil pressure switch connector.
    3. Drain the engine oil and remove the oil filter. CAUTION
      The EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
    4. Remove the exhaust manifold heat insulator.
    5. Remove the fuel tube retainer bolt.
  3. On 2wd models with the 6-cylinder engine:
    1. Remove the front right wheel.
    2. Remove the front gravel shield.
    3. Remove the exhaust manifold heat insulator.
    4. Remove the exhaust manifold.
    5. Detach the oil pressure switch connector.
  4. Unfasten the remaining electrical connections at the starter solenoid.
  5. Remove the two nuts holding the starter to the bell housing, then pull the starter toward the front of the vehicle and out. To install:
  6. Insert the starter into the bell housing, being sure that the starter drive is not jammed against the flywheel.
  7. Tighten the attaching nuts and secure all electrical connections to the starter assembly.
  8. Install all remaining components in reverse order of removal.
  9. Reconnect the battery cables. If applicable, refill and check the oil level. Check the starter assembly for proper operation.
prev.gif next.gif

Aug 29, 2010 | 1992 Nissan Pathfinder

2 Answers

I am having trouble locating the sttarter on my lill sisters 05 pathfinder her boyfriend whom is a greese monkey for honda swears its under the heat shield and if this true how should i go about removing...


REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable at the battery, then disconnect the positive battery cable at the starter. Fig. 1: Starter removal on 4WD — 6-cylinder engine 86713015.gif
    Fig. 2: Starter removal on 2WD — 6-cylinder engine 86713016.gif

  2. On 4wd models with the 6-cylinder engine:
    1. Remove the front gravel shield.
    2. Detach the oil pressure switch connector.
    3. Drain the engine oil and remove the oil filter. CAUTION
      The EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
    4. Remove the exhaust manifold heat insulator.
    5. Remove the fuel tube retainer bolt.
  3. On 2wd models with the 6-cylinder engine:
    1. Remove the front right wheel.
    2. Remove the front gravel shield.
    3. Remove the exhaust manifold heat insulator.
    4. Remove the exhaust manifold.
    5. Detach the oil pressure switch connector.
  4. Unfasten the remaining electrical connections at the starter solenoid.
  5. Remove the two nuts holding the starter to the bell housing, then pull the starter toward the front of the vehicle and out. To install:
  6. Insert the starter into the bell housing, being sure that the starter drive is not jammed against the flywheel.
  7. Tighten the attaching nuts and secure all electrical connections to the starter assembly.
  8. Install all remaining components in reverse order of removal.
  9. Reconnect the battery cables. If applicable, refill and check the oil level. Check the starter assembly for proper operation.

Jul 30, 2010 | 1995 Nissan Pathfinder

1 Answer

Where is the starter in a 1995 nissan pathfinder


Nissan Pick-ups and Pathfinder 1989-1995
Starter - REMOVAL & INSTALLATION
(see Figures 1 and 2)
  1. Disconnect the negative battery cable at the battery, then disconnect the positive battery cable at the starter.
4178adf.jpg


Fig. 1: Starter removal on 4WD-6-cylinder engine

74f3669.jpg

Fig. 2: Starter removal on 2WD-6-cylinder engine
  1. On 4wd models with the 6-cylinder engine:
    1. Remove the front gravel shield.
    2. Detach the oil pressure switch connector.
    3. Drain the engine oil and remove the oil filter.
CAUTION The EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
  1. On 2wd models with the 6-cylinder engine:
    1. Remove the front right wheel.
    2. Remove the front gravel shield.
    3. Remove the exhaust manifold heat insulator.
    4. Remove the exhaust manifold.
    5. Detach the oil pressure switch connector.

  2. Unfasten the remaining electrical connections at the starter solenoid.
  3. Remove the two nuts holding the starter to the bell housing, then pull the starter toward the front of the vehicle and out.

Hope this help (remember rated this).

May 18, 2010 | 1995 Nissan Pathfinder

1 Answer

I need to know how to get the bolts off a nissan pathfinders starter motor


Nissan Pick-ups and Pathfinder 1989-1995
Starter - REMOVAL & INSTALLATION
(see Figures 1 and 2)
  1. Disconnect the negative battery cable at the battery, then disconnect the positive battery cable at the starter.
e757468.jpg
Fig. 1: Starter removal on 4WD-6-cylinder engine


4643c02.jpg
Fig. 2: Starter removal on 2WD-6-cylinder engine
  1. On 4wd models with the 6-cylinder engine:
    1. Remove the front gravel shield.
    2. Detach the oil pressure switch connector.
    3. Drain the engine oil and remove the oil filter.
CAUTION The EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
  1. On 2wd models with the 6-cylinder engine:
    1. Remove the front right wheel.
    2. Remove the front gravel shield.
    3. Remove the exhaust manifold heat insulator.
    4. Remove the exhaust manifold.
    5. Detach the oil pressure switch connector.

  2. Unfasten the remaining electrical connections at the starter solenoid.
  3. Remove the two nuts holding the starter to the bell housing, then pull the starter toward the front of the vehicle and out.
To install:
  1. Insert the starter into the bell housing, being sure that the starter drive is not jammed against the flywheel.
  2. Tighten the attaching nuts and secure all electrical connections to the starter assembly.
  3. Install all remaining components in reverse order of removal.
  4. Reconnect the battery cables. If applicable, refill and check the oil level. Check the starter assembly for proper operation.

Also can check here other DIY.

Hope helped with this (remember rated and comments this help).

Mar 03, 2010 | 1995 Nissan Pathfinder

1 Answer

How to remove a starter from the pathfider


  1. On 4wd models with the 6-cylinder engine:
  2. Remove the front gravel shield.
  3. Detach the oil pressure switch connector.
  4. Drain the engine oil and remove the oil filter. CAUTION
    The EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
  5. Remove the exhaust manifold heat insulator.
  6. Remove the fuel tube retainer bolt.
  7. On 2wd models with the 6-cylinder engine:
  8. Remove the front right wheel.
  9. Remove the front gravel shield.
  10. Remove the exhaust manifold heat insulator.
  11. Remove the exhaust manifold.
  12. Detach the oil pressure switch connector.
  13. Unfasten the remaining electrical connections at the starter solenoid.
  14. Remove the two nuts holding the starter to the bell housing, then pull the starter toward the front of the vehicle and out. To install:
  15. Insert the starter into the bell housing, being sure that the starter drive is not jammed against the flywheel.
  16. Tighten the attaching nuts and secure all electrical connections to the starter assembly.
  17. Install all remaining components in reverse order of removal.
  18. Reconnect the battery cables. If applicable, refill and check the oil level. Check the starter assembly for proper operation.

Jun 18, 2009 | 1995 Nissan Pathfinder

1 Answer

How do I replace the starter?


  1. Remove FR R.H splash guard.
  2. Remove oil pressure switch connector.
  3. Remove oil filter.
  4. Remove exhaust manifold heat insulater.
  5. Remove fuel tube retainer bolt.
only 4wd

  1. Remove FR R.H wheel.
  2. Remove FR R.H splash guard.
  3. Remove exhaust manifold heat insulater.
  4. Remove exhaust manifold.
  5. Remove oil filter.
  6. Remove oil pressure switch connector.
other but 4wd

May 15, 2008 | 1995 Nissan Pathfinder

Not finding what you are looking for?
1995 Nissan Pathfinder Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...