Question about 2005 Suzuki Aerio

1 Answer

Noise from RF wheel on left turn, Wheel bearing, brakes replaced, noise still there. What next? Front brakes and backing plate have been replaced.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 2,200 Answers

Hi

Given that you have already changed the wheel bearing the most likely cause for this is worn CV joints. The CV or constant velocity joints on your driveshafts (when worn) will usually emit a clicking or clacking type of noise when the steering is turned to full lock. If this is describing what you are hearing it is a classic symtom of CV trouble. Sometimes a "growl" may be associated with this problem also.

Otherwise noise when applying brakes or shifting gear is usually associated with worn ball joints in the suspension or worn steering/lower/upper arm linkages.

Hope this helps. Please remember to rate my answer. Thanks

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After replacing right front wheel bearing 2011yaris there's a scraping noise from r/f wheel only going forward & increases with speed It doesn't do it in reverse turning steering wheel left no noise


What you may be hearing is the stone guard (metal plate) behind the brake rotor. It may have been bent slightly during the removal/replacement of the wheel bearing, causing it to contact the rotor while in motion. It poses no imminent danger, but it is annoying.

Nov 12, 2015 | Cars & Trucks

1 Answer

Slight noise when turning left. RF hub bearing?


Wheel bearing by the sounds of it. These cars are known for wheel bearings going bad. Hope this helps

Jan 04, 2013 | 1997 Chevrolet Cavalier

1 Answer

Noise from RF wheel on left turn, Wheel bearing, brakes replaced,


probably the axle. if the u-joints on the axle will start to knock around.

Jul 30, 2012 | Cars & Trucks

2 Answers

I have a 2004 corolla that has a humming noise in the front when turning to the right.replaced the right front wheel bearing and noise still there.any ideas?


It's most likely the left wheel bearing that's causing the noise, when turning to the right the weight of the car shifts to the left placing more load on the left wheel bearing and takes load off the right bearing.

Aug 23, 2011 | 2004 Toyota Corolla

1 Answer

2003 camry with 200,000 miles has rubbing noise not the brakes wondering if a cv joint or u joint problem


If you have a rubbing noise on the BRAKES then its most likely the pads worn out and touching the metal backing plate ,other wise it could be the wheel bearing worn or coming loose but the CV Joint if worn will make a clanking noise when turned on full lock either Left or Right.
So jack it up at the front and check the wheel bearings and turn the wheel to see if the noise is there as it will be a metal to metal noise ,but if pads are good then it will just be a soft rubbing noise.

Mar 22, 2011 | 2003 Toyota Camry

1 Answer

Grating soung coming the front wheel


is it like a growling noise, or a metallic "metal on metal" noise, is it clicking? when do you hear it? Common for wheel bearings to go out on those in my experience. usually you can narrow it to a wheel bearing if when you sway the car, you hear a growling noise towards the heavy end of the car, meaning if you turn to the left, causing the car to naturally sway right, the right hand tire front or rear starts making noise, thats usually a wheel bearing. If its a clicking noise while cornering and especially when corning with acceleration, thats usually a CV axle. if its a metal on metal noise, that can be a brake pad worn to low, or even just a simple backing plate to the brake rotor touching and rubbing the rotor.

Jan 22, 2011 | 2001 Volkswagen Golf

1 Answer

Right front wheel howls on 2000 Accord EX


are your front right brake pads worn more than your front left? if so probable cause is the rotor. if not, most likely wheel bearing

Oct 07, 2009 | 1996 Honda Accord

1 Answer

Noise from the right front wheel during a left turn. Parts replaced: Wheel bearing, brakes, plate behind the rotor. What could this noise be?


try swapping rotors , from one side to another i have had that cure problem ,if noise moves replace rotor

Jul 15, 2009 | 2005 Suzuki Aerio

2 Answers

Few days ago I start hearing a constant noise while driving , coming possibly from front right wheel. There is no noise when car is moving slowly , but past 30km/h noise is increasing proportionate to...


check your wheel bearings, brakes and backing plate, since you said the noise is proportionate to speed i'm pretty sure its your wheel bearing, does the noise change when you turn (get louder or softer?) if so, i'm 98% sure its the wheel bearing

Jun 20, 2009 | 2001 Jaguar S-Type

3 Answers

Scraping pulse noise r front merc sable


Check the condition of the wheel bearings, front and back side if the brake rotor, and the back side of the rim. Everything should be clean, rust build-up can throw everything out of true. The hub or wheel-bearing should be tight and smooth when spun.

May 12, 2009 | Mercury Sable Cars & Trucks

Not finding what you are looking for?
2005 Suzuki Aerio Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...