I need the cylinder head torque settings for the 1.9 tdi turbo engine on my 2002 jetta

Once you get the words in the right order to form the search query, you need to add the word of the part you want the torque setting for. The problem is the all the weighting is given to the torque that the engine produces and is normally right next to the horsepower

https://www.google.com/search?q=2017+Nissan+Navara%2C+2.3+turbo+diesel%2C+Torque+Settings

So insert 'wheel nuts', 'cylinder head' etc HERE

2017 Nissan Navara, 2.3 turbo diesel, HERE Torque Settings

Example for 'cylinder head'......

https://www.google.com/search?q=2017+Nissan+Navara%2C+2.3+turbo+diesel%2C+cylinder+head+Torque+Settings

..

all 1.9 tdi engines with 8v cylinder heads have glow plugs out side cylinder head, you will find them easy. Torque is from 12 - 14 Nm.

33ft/lb, 44ft/lb, plus 1/4 turn

The 2002 service manual says replace stretched bolts. stage I: 30 ft-lb (40Nm) stage II: additional 1/4 turn, stage III: another 1/4 turn. Start in center, work your way out diagonally back and forth (crossways) ending on the ends of the block. Do this sequence on each stage.

your cylinder head gasket was damage or your engine might have hole. But the number one suspect is the cylinder head gasket is damage

Replace bad Engine Coolant Temperature (ECT) sensor. ECT sensor is placed in the right back side of the cylinder head on 2002 VW Jetta 1.9 TDI. See picture below:

Replace the Engine Coolant Temperature (ECT) sensor. ECT sensor is placed in the right back side of the cylinder head on 2002 VW Jetta 1.9 TDI. See picture below:



Please do rate my response. Thanks!

if its a diesel 8v or a petrol then its 40 nm, 60 nm, 90 degree, 90 degree

Hallo
1.Disconect lower hose from intercooler and oil (from 0,1 liter or more) (sometimes 1-2 liters) comes out, you should not drive it.(car had probably loose power) Change the turbine, oil and oil filter. do not forget to disconect lower hose and let oil drain out. Otherwise when new turbine is instald, the air flow will **** this oil inside the engine and distroy it.
2.your car is not designed to run without turbine and will not work like normal disel.(SDI).
hope it helps
Marko

bob go to collsionrepairadvice.com and I will send the download to you its a big file