SOURCE: Can't find where the red Plastic Tube, in Windstar 2000, fits.
the red tube goes into upper coweling amost directly above the the left corner of engine ,it is hard to get on,use mirror or small hands. below fresh air grill and wipers.almost straight up from where it originates on engine.
SOURCE: I need to drain the
Not 100% sure but if you look up under exhaust manifold area, on block,is usually a common place. Simple hex head plug into block on most. Are you sure just pulling lower rad hose, and thermostat housing off won't get you where you need to be?
SOURCE: R & R for 2000
Intake Manifold - Removal & Installation
Fig. Lower intake manifold torque sequence - 3.8L engine (click image for zoom)
Fig. Upper intake manifold torque sequence - 3.8L engine (click image for zoom)
Fig. Lower intake manifold torque sequence-3.8L engine (2004 models)
3.8L Engines
NOTE
Be sure to record the locations of the long bolts and short bolts in the upper and lower intake manifolds.
To install:
Hope helps.
725 views
Usually answered in minutes!
×