Question about 2000 Dodge Dakota Quad Cab

1 Answer

1999 3.9 v6 Dodge...new water pump..new thermostat..new timing chain ..just changed after water pump failure ...overheated when ac was on previoulsy...before the installation of these parts..now motor still overheats..fliud level correct...what could be the problem and solution?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

Need a new electric fan.

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to change timing chain on 2000 Dodge Intrepid 2.7 l. While I do that what else should I change? oil pump, water pump, etc..


These usually have timing belts, if the water pump isn't making nose, leaking or dragging, put it back on. If it does have a timing chain in it, put new timing gears and guides in it as well, easier to do while you already have it apart. Check your power steering pump to make sure it is not leaking or the bearing isn't dragging, if so replace. Replace the thermostat while you have it apart. Check all hoses and belts to see if they need to be replaced while your at it, you will have most of them off anyway. Definitely check the serpentine belt that runs everything on the front of the motor, if it is cracked or worn, replace. Better to do it now rather than along the side of the road. Hope this helps you.

Aug 24, 2011 | 1999 Dodge Intrepid

1 Answer

How to change water pump on 1999 alero 2.4 liter twin cam


REPLACE WATER PUMP ON A 1999 OLDSMOBILE ALERO. FIRST YOU HAVE TO DRAIN COOLANT SYSTEM IN A LARGE DRAIN. RADIATOR DRAIN PLUG SHOULD BE ON THE BOTTOM ON PASSENGER SIDE. THEN RAISE THE VECHICLE SUPPORT VECHICLE WITH JACKSTANDS. REMOVE THE EXHAUST MANIFOLD FROM THE ENGINE. CAUTION DO NOT ROTATE THE FLEX COUPLING ON THE FRONT EXHAUST PIPE MORE THAN 4 DEGREE OR DAMAGE TO THE FLEX COUPLING MAY OCCUR. REMOVE THE THERMOSTAT AND THE COOLANT INLET PIPE FROM THE WATER PUMP HOUSING AND SEPARATE THE ASSEMBLY FROM THE ENGINE. LOWER THE VECHICLE REMOVE THE BRAKE BOOSTER VACUUM HOSE FROM THE CAMSHAFT HOUSING. REMOVE THE FRONT TIMING CHAIN COVER AND THE TIMING CHAIN TENSIONER FROM THE ENGINE. CAUTION THE TIMING CHAIN TENSIONER MUST BE REMOVED TO UNLOAD CHAIN TENSION BEFORE REMOVING THE WATER PUMP FROM THE HOUSING OTHERWISE THE WATER PUMP WILL BECOME JAMMED IN THE TIMING CHAIN HOUSING. REMOVE THE HEATER OUTLET PIPE FROM THE WATER PUMP COVER. REMOVE THE WATER PUMP COVER BOLTS FROM THE ENGINE BLOCK AND THE WATER PUMP. REMOVE WATER PUMP RETAINING NUTS AND SEPARATE THE WATER PUMP FROM THE TIMING CHAIN HOUSING. CLEAN THE SEALING SURFACES OF ALL GASKET MATERIAL ON THE WATER PUMP, WATER PUMP COVER AND THE TIMING CHAIN HOUSING. WIPE THE MATING SURFACES WITH A RAG SATURATED LACQUER THINNER OR ACETONE. YOU CAN BUY THESE CHEMICAL AT LOWES OR WALMART DEPARTMENT WHERE THEY SELL PAINTS. FIRST INSTALL THE WATER PUMP COVER AND GASKET TO THE WATER PUMP ON THE BENCH BUT LEAVE THE BOLTS FINGER TIGHT. APPLY A THIN LAYER OF RTV SEALANT TO BOTH SIDES OF THE NEW GASKET AND INSTALL THE GASKET ON THE WATER PUMP. WAIT FOR RTV SEALANT SET UP DRY FIRST. POSITION WATER PUMP AND WATER PUMP COVER ASSEMBLY INTO TIMING CHAIN HOUSING ENGAGING THE WATER PUMP SPROCKET IN THE TIMING CHAIN, AND INSTALL THE NUTS FINGER TIGHT. USE CAUTION TO ENSURE THAT THE GASKET DOESNT SLIP OUT OF POSITION. LEAVE THE NUTS LOOSE TO ALLOW REPOSITIONING WHEN THE BLOCK BOLTS ARE INSTALLED IN THE NEXT STEP. INSTALL THE WATER PUMP COVER TO ENGINE BLOCK BOLTS AND TIGHTEN THEM BY HAND. LUBRICATE THE O - RING ON THE HEATER OUTLET PIPE WITH COOLANT AND INSTALL IT INTO THE WATER PUMP COVER. HAND TIGHTEN THE BOLTS. NOW THAT THE ENTIRE WATER PUMP HOUSING ASSEMBLY IS INSTALLED AND IS FITTED AGAINST THE ENGINE BLOCK. TIGHTEN BOLTS CRISS CROSS SEQUENCE TO INSURE PROPER SEAL TORQUE WATER PUMP TO TIMING CHAIN HOUSING NUTS TO 19 FT LBS .NOW TORQUE WATER PUMP COVER TO WATER PUMP HOUSING BOLTS TO 124 INCH POUNDS. TORQUE WATER PUMP COVER TO ENGINE BLOCK BOLTS 19 FT LBS. TORQUE 124 INCH POUNDS THE RADIATOR OUTLET PIPE TO WATER PUMP HOUSING. INSTALL THE TIMING CHAIN TENSIONER AND COVER. INSTALL THE EXHAUST MANIFOLD. INSTALL THE EXHAUST PIPE TO THE EXHAUST MANIFOLD. WHEN ALL IS DONE. START POURING COOLANT IN THE RADIATOR OR COOLANT OVER FLOW JUG.CHECK FOR LEAKS. IF IS GOOD KEEP ADDING COOLANT TO RADIATOR OR OVER FLOW RESERVOIR UNTIL COOLANT LEVEL STOP DROPPING. NOW START ENGINE. WATCH THE COOLANT LEVEL WHEN START DROPPING ADD MORE COOLANT IN RADIATOR OR OVERFLOW JUG. WHEN COOLANT STOP DROPPING INSTALL RADIATOR CAP OR OVERFLOW JUG CAP. LET ENGINE IDLE UNTIL THERMOSTAT OPENS WATCH TEMPERATURE GAUGE WHEN TEMPERATURE GAUGE RISING TO OVERHEATING. TURN OFF ENGINE WAIT A WHILE TAKE A LARGE RAG SLOWLY OPEN RADIATOR CAP A LITTLE TO RELEASE PRESSURE. WHEN PRESSURE RELEASE REMOVE RADIATOR CAP ADD MORE COOLANT. START ENGINE LET IDLE WATCH TEMP GAUGE. TEMP GAUGE START RISING AGAIN TURN OFF ENGINE LET IT SET A WHILE ADD MORE COOLANT. TO RADIATOR. WHEN ENGINE TEMPERATURE GAUGE STOP RISING AND THERMOSTAT OPENS YOUR COOLANT SYSTEM AIR IS BLED OUT. JUST LET VECHICLE SET A LITTLE CHECK COOLANT LEVEL MAKE ITS CORRECT BEFORE START DRIVING VECHICLE. IF YOU TAKE VECHICLE FOR TEST SPIN TAKE LARGE RAG AND PLENTY COOLANT WITH YOU.IF ENGINE START OVERHEATING WHILE DRIVING PULL OFF ROAD SAFELY WAIT 20 TO 30 MINUTES. USE LARGE RAG SLOWLY OPEN CAP A LITTLE RELEASE PRESSURE. THEN REMOVE RADIATOR CAP ADD MORE COOLANT IF NEEDED. HOPE THIS HELP.

Dec 10, 2010 | 1999 Oldsmobile Alero

1 Answer

1999 Gran Am water pump need to replace


I am hoping for you sake it is a v6 instead of a 4 cylinder, on the v6 you take off the belt then the water pump pulley on top closest to the front with 4 10mm bolts, then when the pulley is off you take off the 8mm bolts take off the pump clean off the old gasket material put the new gasket on the new pump and reverse the procedure. on the 4cylinder however it involves removing the timing chain cover the chain and a bit more

Jul 25, 2010 | 1999 Pontiac Grand Am GT

1 Answer

My 1999 dodge neon is overheating and just changed water pump and thermostat radiator. No leaks and no water in oil. Changed thermostat again and same problem . How can you tell if water pump is bad and...


Last time I had this problem I had a cracked head. With the cap off the radiator, run the engine at idle to operating temperature. When your looking in the radiator you should see the water circulating if the water pump is working. When you say the motor is over heating, if you have fluid coming out of the over flow hose then yes you are most likely overheating, if you are just seeing the gauge indicate you are over heating you may just have a bad engine temp sensor.

Jun 26, 2010 | 1999 Dodge Neon

1 Answer

Is the water pump on 02 dodge interpid 2.2 ran by


If you mean the 2.7 liter V6 (I think the Intrepid only came with the 2.7 or 3.5 liter V6), the answer is yes. The water pump is driven by the timing chain.

May 14, 2010 | 2002 Dodge Intrepid

1 Answer

Smelled mild burning, lost antifreeze - engine temp Hot. I looked under car and noticed a serverly frayed Belt - NOT the big surpentine belt - another small belt on the driver's side. 1999 Mercury Mystique...


For the 1999 Mercury Mystique Water Pump Belt on 2.5L V6 Engine:

Probable Causes: Belt: worn out, started slipping. Overheating caused by failure of Belt. Lost antifreeze: caused by failure of belt, not turning Water Pump Pulley, not circulating anitfreeze, which resulted in overheating.

Click on the following free direct Link. It has the Serpentine & Drive Belt Diagrams and Tensioners for your 2.5L Engine.
Scroll down the Page (about 1/3rd down) to Diagram #G99H08189, it shows the specific Water Pump Belt.
Note the Tensioner.
http://www.2carpros.com/car_repair_information/year/1999/make/mercury/model/mystique/1999_mercury_mystique_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Jun 03, 2009 | 1999 Mercury Mystique

3 Answers

Timing belt or chain


Ummmm woahhh hold up here...every 2.7 litre V6 i've been associated with had timing CHAINS. The chains ran the water pump and dual over head camshafts.
The 2.7l engine was manufactured by Mitsubishi for Chrysler and had an internal water pump with defective seals that allowed coolant to leak & mix with the oil causing severe sludging problems and eventual engine FAILURE...This has been a nightmare for Chrysler AND OWNERS !
MANY owners have contacted ISG Impartial Services Group 1-(866)332-3746 for a settlement with Chrysler
Attached is a cutaway view of the 2.7 litre, and as you can clearly see it is chain driven.
I've been a MOPAR enthusiast all my life...sadly, this engine was one of the worst to ever hit the streets.
Good luck Doug...i hope this helps.

2519ac2.jpg

May 26, 2009 | 1999 Dodge Intrepid

Not finding what you are looking for?
2000 Dodge Dakota Quad Cab Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...