2007 Ford Mondeo 2.0 Logo
J
John Brinkworth Posted on Feb 16, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Analog clock don't work

Analog time clock wont work in my Mondeo M3 when I turn the key with out starting the clock lights up for a second then goes out I have tried another clock and the same happen, only had the car a month but the clock has never worked could you help thank you.John

1 Answer

2wsx

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

  • Expert 128 Answers
  • Posted on Feb 25, 2016
2wsx
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Joined: Aug 10, 2009
Answers
128
Questions
2
Helped
32881
Points
258

I am not familiar with Mondeos, but usually analog clock works all the time.... no matter if ignition is on and off..... ignition usually just turn on and off backlight of clock.... so I would check for fuse or some loose connection leading to clock..... check if you have power for that clock with ampermeter

5 Related Answers

Anonymous

  • 373 Answers
  • Posted on Jul 10, 2008

SOURCE: 2005 ford taurus. Remote entry wont work theft light keeps blinking when key is engaged

HI, I'm reading your problem,
Let me explain something about your car.

2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.

If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.

OK.. I hope this information work for you.

Thank's for submit yous question on fixya.com

Ad

Anonymous

  • 150 Answers
  • Posted on Nov 03, 2008

SOURCE: 1999 Ford Taurus Wont Start

Tapping the starter does not always work. I would check all the connections on the battery and starter. If these are good replace the starter. Don't forget the grounds.

Anonymous

  • 109 Answers
  • Posted on Nov 19, 2008

SOURCE: Ignition key turns on but car will not start

I suspect the ignition switch is malfunctioning.

Anonymous

  • 1 Answer
  • Posted on Jun 15, 2009

SOURCE: 1997 ford expedition wont stay running?

sounds like its the IDEL AIR CONTROL motor is stuck tap {pretty hard} on side of it with hammer if it starts and runs replace control motor.

chitownbob45

chitownbob45

  • 316 Answers
  • Posted on Oct 18, 2009

SOURCE: my 2000 ford explorer suddenly wont start... the

does the battery have a full charge to it? If so clean battery terminals and chck battery cable at starter make sure its getting good contact. Make sure battery ground is making good contact at engine. Can you jump the car off? If so take off positive battery terminal while the car is running if the car dies altenaters bad replace it.

Testimonial: "will submit my testimony after i try the advice, but i asked for help in getting my hood opened also, which i guess they forgot to answer. "

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i reset the computer on my 2002 pontian Bonneville so the security light will go off and my car will start? Or is there another way to get it to start? I have my keys, both my original and spare. I...

Turn the key on for 10 minutes, until the security light goes out. Then turn it off for 5 seconds, then back on and start the car. See if the light goes off. Don't open any doors during this time.
0helpful
1answer

1997 Saturn SC2 wont start electrical issue

Some check light on dahsboard or "theft" system there?
0helpful
1answer

Program new key for montana

As long as you still have one that works, it's easy.
1) Insert the "original" (working) Key.2) Turn the Ignition to ON (RUN), but do NOT start the engine. Turn the Ignition OFF and remove the key.3) Within 15 seconds insert the new key and turn the Ignition to the ON (just to ON, not to START) position. The Security indicator should light up for about 2 seconds to indicate that the new key has been programmed.
At that point, it should work. I don't know how many different keys you can get the Theft Deterrent Module to recognize; there may be a limit.
If you're don't have a working key now, it's much more time-consuming;the procedure to get the TDM to recognize a different key takes about 30 minutes when you don't have an old one that works.
0helpful
2answers

Car wont start with new ignition

If it has a magnatic chip then it has to be relearned and you might have to take it to the delership for that, its a pain.
1helpful
1answer

How do i reset my 2001 ford mondeo car key after replacing the battery?

Programming
When
Key(s) added or replaced. System malfunction.
How
Obtain all keys fitted with remote control. Turn ignition switch from position 0 to position II 4 times within 6 seconds. Turn ignition switch to position 0. The system will emit an acoustic signal to indicate start of programming mode. Programming mode activated for 10 seconds proceed as follows: Press and hold lock, unlock or boot release button Fig. 1 [1], [2] or [3]. Wait for acoustic signal (indicates correct programming). Repeat above procedure within 10 seconds to program remaining keys. To exit programming mode: Turn ignition switch to position III or wait 10 seconds. Keys can also be programmed using diagnostic equipment.
NOTE: A maximum of 4 keys can be programmed
1helpful
1answer

Flashing alarm light after battery change. Car wont start,

System operation
System arms 5 seconds after switching ignition OFF. Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds. If LED flashes rapidly at regular intervals for approximately 1 minute, then flashes at irregular intervals: Key code not recognised. Remove key and try again.
Programming
When
System malfunction: LED illuminates for 1 minute, then flashes at irregular intervals. Key(s) added or replaced.
NOTE: Replacement keys MUST have blue mark. Keys with red mark are NOT compatible with this system.
How
NOTE: Programming method using vehicle keys can be deactivated using diagnostic equipment.
Obtain 2 programmed keys (A and B). Insert key A into ignition switch. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key A. Insert key B into ignition switch within 5 seconds. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key B. Within 10 seconds: Insert key to be programmed into ignition switch. Turn ignition switch to position II. Wait 4 seconds. Switch ignition OFF. Wait 5 seconds. Start engine. If engine does not start and clock LED flashes: Switch ignition ON. Wait at least 20 seconds. Switch ignition OFF. Repeat programming procedure. Repeat above procedure to program remaining keys. Keys can also be programmed using diagnostic equipment
1helpful
2answers

Ford Mondeo rear brake pads replacement

Hi,
I have ford mondeo ghia 2002.
when i press the button on the remote-key, I can lock and unlock the powerlock (in the door).
When I press the button un the door, not all doors are locked.

What's the reason?
thnak's
1helpful
1answer

Ignition key fault

Inside where the key goes give a couple of squirts of three in one oil or similar. It may help.
2helpful
2answers

How do I turn off the change oil light on a 1994 corvette

1. Turn the key to “Run,” but don’t start
2. Press “ENG MET” on the Trip
the engine.
Monitor. Then, within five seconds,
press it again.
3. Within five seconds, press and hold
“GAUGES” on the Trip Monitor. The
“CHANGE OIL” light should flash.
4. Hold the “GAUGES” button until the
“CHANGE OIL” light stops flashing
and goes out. This should take about
ten seconds.
When the light goes out, the monitoirs
reset. If the monitor doesn’tr eset, turn the
ignition off, then try again.

Not finding what you are looking for?

370 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...