?€¢
The ignition switch is in the RUN position.
?€¢
The data link connector (DLC) is accessible.
Follow the instructions on the Techline Terminal and scan tool to program the BCM. If the BCM fails to accept the program, perform the following steps:
?€¢
Inspect all BCM connections.
?€¢
Verify that the Techline Terminal and scan tool have the latest software version.
?€¢
The ignition switch is in the ON position.
?€¢
The data link connector (DLC) is accessible.
?€¢
All disconnected modules and devices are reconnected before programming.
To setup a new BCM, access the SPECIAL FUNCTIONS menu on the scan tool to program the BCM. Select SETUP NEW BCM and follow the instructions on the scan tool. If the BCM fails to accept the program, perform the following steps:
?€¢
Inspect all BCM connections.
?€¢
Verify that the scan tool has the latest software version.
This is something best left to the dealer or a mobile Tech that does this sort of thing , if you get it wrong you could make it that the vehicle won't start or run !
60 views
Usually answered in minutes!
×