Question about 1997 Toyota Camry

1 Answer

Key will turn to auxilary position but won't go further.

Once in auxilary could remove key. Was finally able to turn off auxilary and remove key

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

I am led to believe that you have a worn-out key. Call your toyota dealer parts dept, give them your VIN number. Get them to give you the key code to your car. Go to a locksmith, give him the code, and have them cut you a new key.

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition of ford edge will not turn completely off..it is stuck in position 2 in auxillary power


1-
My ignition key will not turn to off. I can remove the key, but it stays in the accessory mode. What's the fix?
My ignition key will not turn to off can remove the key but it stays in...

2.
Ignition key is stuck and does not turn Inspection Service & Cost
Ignition key is stuck and does not turn Inspection Service Cost...

3.
Ignition key won turn

Aug 24, 2016 | 2012 Ford Edge

1 Answer

1998 s-10 security light


If the security light is hot or flashing when the key is in the on position, most likely the ignition key tumbler housing has failed.

You can try resetting the pass code by turning the ignition switch to the on position (do not crank or start the engine). Leave the key in the on position for 10 minutes. Turn the key to the off position, wait 5 seconds and turn the key to the on position again and leave it on for 10 more minutes. Cycle the key to the off position again for 5 seconds the back on for a final 10 minutes. Once the final 10 minutes is complete, turn to the off position again, wait 5 seconds and now turn the ignition on and to the start position. The pass code has now been reset and it should start. If the reset does not work you will have to change the ignition key tumbler housing that contains the key code resistor.
Good luck

Apr 03, 2014 | Chevrolet S 10 Cars & Trucks

4 Answers

Ignition key won t turn


The ignition key won't turn likely because the shifter linkage that locks the key in OFF is worn or loose. Move the shifter linkage hard to the Park position and the key will turn. Have the linkage adjusted and the worn parts replaced

Mar 30, 2014 | 2000 Mercury Grand Marquis

1 Answer

How replace a lock tumbler on a 1995 Mercedes benz c220


If the key does not turn at all in the ignition tumbler then your going to need to drill a hole in the side of the steering lock in order to manually release the steering lock and remove it complete with the ignition tumbler attached. If you get a new steering lock you can examine it to see exactly where to drill the hole and how to manually release it. If the key does turn at least to position 1 then all you need is the removal pins that slide into the small holes around the face of the tumbler. If there are no holes then once the key is in position 1 all you have to do is turn the tumbler housing to the left until is unscrews. Let me know if you need any further assistance on the removal if the key is stuck.

Sep 26, 2012 | 1995 Mercedes-Benz C-Class

1 Answer

Changed battery and replaced lost key. Now it won't start


nitabelle57, It sounds like your security system will not recognize the new key you purchased. Keys have a chip in them which has to be recognized by the security system in order to work. The new key has to be programmed by your security system before it will start your vehicle. You will need a battery charger to program the key as this procedure takes thirty minutes to do. Put the charger on the battery. Be sure everything else is turned off. Place the new key in the ignition and turn it to the run position. The security light should come on. After ten minutes the security light should be out, if not proceed anyway. Turn the key to the off position but do not remove it. Wait five seconds and turn it to the run position once again. Wait another ten minutes and turn it off again. Wait five seconds and turn it to the run position once again. After the final ten minutes turn the key off (do not remove it) Wait thirty seconds and then the key should be programmed. If you have any other keys they will not work now as the security system is now programmed for the one key. If you have another key and need it for another driver then start the vehicle with the newly programmed key and let it run for about a minute. Place the extra key in the ignition and turn it to the run position and wait sixty seconds. This should solve that problem. Good luck with this.

Aug 10, 2011 | 1997 Pontiac Grand Prix

1 Answer

My key wont turn to off in order to remove my key from ignition while in parking


Ignition - Key Stuck In Ignition Switch/Won't Turn Bulletin No.: 06-02-35-005 Date: February 28, 2006 TECHNICAL Subject: Key Stuck in Ignition, Key Will Not Return to Off Position, Shifter Button Won't Release in Park Position (Adjust Shifter Detent Finger) Models: 2002-2005 Chevrolet Monte Carlo Condition Customers may comment on any of the following conditions: - The key is stuck in the ignition cylinder. - They cannot return the key to the off position to remove the key. - The shifter button won't release in the park position. Cause This condition may be caused by the detent finger shifting over time. This may result in mis-alignment and binding of the shift rod on the shift position guide.
WHERE YOUR SHIFTER IS YOU WILL HAVE TO TAKE IT APART ..MAYBE THE RUBBER BOOT IS IT THE WAY,OR THE SHIFT LOCK SELINOID WHENT BAD

Aug 05, 2011 | 2005 Chevrolet Monte Carlo

1 Answer

I have a 1987 Ford F250 Lariat. Auxilary problems


not the cylender adj the ignition switch down on the steering colum

Apr 11, 2009 | 1989 Ford F 150

Not finding what you are looking for?
1997 Toyota Camry Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...