Question about 1996 Lincoln Continental

1 Answer

I hav no signal lights or emergency lights at all

The side bar lights come on but none of the lights flash at all

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

You will have to change your hazard light switch and put new one and should work.if my info was of any help please leave a comment,notee,vote.thankyou

Posted on Sep 09, 2009

  • vlad karman Sep 09, 2009

    you will have to change your hazard light switch and put new one and should work.if my info was of any help please leave a comment,notee,vote.thankyou

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn the signal lights for left or right turn the emergency flasher start flashing all four turn signal lights. the emergency flashers work ok


ck your turn signal switch wiring connector because it is more than likely has been hot and melted some connections.

Oct 18, 2014 | 2000 Kia Sportage

2 Answers

Turn signal will eluminate but not flash. emergancy lights work and flash fine. Have replaced the flasher and turn signal switch.


You know you have 2 flashers right, one for emergency flashers and one for signal lights? Does it refuse to flash on both sides, right and left? Have you checked all bulbs front and back are good?

Jan 27, 2013 | 1993 Plymouth Sundance

2 Answers

1990 Cadillac Fleetwood Left turning light or emergency lights go on but don't flash. The right turning light flashes well. If I turn the handle not all the way left and move it a bit the left light begins...


You most likely need a new blinker switch - the emergency flasher is also most likely bad - there is one flasher for turn signals - and one for the emergency lights --
Replacing a blinker switch is best left to the pros --
also - Take down the Vin # and call the local dealer - - ask about recalls and Service bulletins.

Dec 28, 2009 | 1990 Cadillac Fleetwood

1 Answer

Turn signal sound stays clicking with no lights how do i fix


Try turning on the emergency flashers(they operate on a different flasher) if all your lights are flashing then all you need is a turn sig. flasher. Easy to find right near or on the fuse block. If none of the emergency lites flash you may have an open cicuit in the turn sig, switch.

Aug 06, 2009 | 2002 Pontiac Grand Am

4 Answers

Front driver side turn signal light doesn't flash.replaced bulb,replaced socket,all other lights work on emergency flasher,except front driver side.rear driver side turn signal light works,but flashes...


replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

May 09, 2009 | 1998 Buick Century

1 Answer

Right Turn Signal not flashing.


quick fix,try to run jumper wire from solid lime green wire to tail light green/orange wire Your problem is no power

Apr 21, 2009 | Plymouth Acclaim Cars & Trucks

2 Answers

1995 buiick lesabre


Go under the dash on the driver side. There is the fuse box, and around it three screws, and a small wing. Get that cover off, and you will see the relay.

Jan 01, 2009 | 1995 Buick LeSabre

1 Answer

No brake lights of blinkers 1990 dodge dynasty


While not likely, it is possible that the light bulbs in both sides are have bad filaments. Turn on ignition key (but don't start engine). Then turn on parking lamps (first detent or "click" on headlamp switch). Walk around car and look for illumination on front parking lamps and rear tail lights. Turn on the right turn signal. Are those (right hand) lamps now changing brilliance? Try the left turn signal in the same manner. Are those (left hand) front and rear lights changing briiliance? Take note of any positions that did NOT change briliance when the turn signals were activated. If NONE changed briliance, you either have a bunch of bad bulbs (unlikely) or a bad flasher (more likely) or a bad turn signal switch (most likely) or perhaps wiring problems (possible if the car has been in a collision or has been "worked on" by some "non-expert" mechanic). Check the action of the emergency flasher control switch located on the steering column (facing up). Pushing it in (down) should result in the button going to two different heights alternately (low, high, low, high). You could just have bad flashers or corroded flasher contacts! Good luck!

Nov 15, 2008 | 1993 Dodge Dynasty

Not finding what you are looking for?
1996 Lincoln Continental Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...